View previous topic :: View next topic |
Author |
Message |
HamburgerHelper1
Joined: 22 Feb 2014 Posts: 577
|
Posted: Sat Jul 04, 2020 2:31 pm Post subject: Insignia NS-RMT415 |
|
|
Just got this remote and manually put in a
DSM this remote does support it even though it is not in the RDF
Am i correct that i can just add
[SpecialProtocols]
DSM=Internal:0
to the RDF
Also when download RMIR has the
Note: Devices on this remote are selected by scrolling through a fixed list and a device with an unset setup code is skipped. A blank entry in the setup column denotes an unset setup code.
But this is not that type of remote
Here is link to raw download
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=25997 |
|
Back to top |
|
|
mathdon Expert
Joined: 22 Jul 2008 Posts: 4523 Location: Cambridge, UK |
Posted: Sun Jul 05, 2020 7:37 am Post subject: |
|
|
HamburgerHelper1 wrote: | Am i correct that i can just add
[SpecialProtocols]
DSM=Internal:0
to the RDF |
Yes, that is all that is needed.
Quote: | Also when download RMIR has the
Note: Devices on this remote are selected by scrolling through a fixed list and a device with an unset setup code is skipped. A blank entry in the setup column denotes an unset setup code.
But this is not that type of remote |
This is due to the entry
Code: | SoftDev=SetupCodesOnly |
in the [General] section of the RDF. I cannot trace why this is there. As far as I can tell, it has been present since the RDF was first created. Please delete this entry and report back whether it has any adverse consequences.
I intend to release RMIR v2.11 in the next few days and will include these changes. If you can get back to me about the SoftDev change before then, it would be helpful. _________________ Graham |
|
Back to top |
|
|
HamburgerHelper1
Joined: 22 Feb 2014 Posts: 577
|
Posted: Sun Jul 05, 2020 8:19 am Post subject: Insignia NS-RMT415 |
|
|
yes deleting "SoftDev=SetupCodesOnly" gets rid of the message
and RMIR works like it should
adding
[SpecialProtocols]
DSM=Internal:0
to the RDF
also worked
Thank You |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
Posted: Sun Jul 05, 2020 4:11 pm Post subject: |
|
|
Graham, there are 2 versions of this remote, so the SoftDev entry should be removed from both. I don't recall it being in the first version of the RDF.
DSM should probably be added to both versions as well. But I no longer have one of these remotes to test. |
|
Back to top |
|
|
mathdon Expert
Joined: 22 Jul 2008 Posts: 4523 Location: Cambridge, UK |
Posted: Mon Jul 06, 2020 7:27 am Post subject: |
|
|
mdavej wrote: | Graham, there are 2 versions of this remote, so the SoftDev entry should be removed from both. ...
DSM should probably be added to both versions as well. But I no longer have one of these remotes to test. |
Done and included in RMIR v2.11, just released. _________________ Graham |
|
Back to top |
|
|
|