View previous topic :: View next topic |
Author |
Message |
agruber11
Joined: 29 Feb 2020 Posts: 14
|
Posted: Sun Mar 08, 2020 9:55 am Post subject: |
|
|
"Long press of ffwd and req are the skips. So those are correct."
Well I didn't 'long press' the ffwd or rwd buttons -- but the skip codes (i.e. the codes that I bound to the 'skip' buttons in the Device Editor) were what were transmitted on short presses of ffwd or rwd. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Sun Mar 08, 2020 10:22 am Post subject: |
|
|
Point is long press sends different commands than short. So those buttons have 2 commands each. So you need to test both. |
|
Back to top |
|
|
agruber11
Joined: 29 Feb 2020 Posts: 14
|
Posted: Sun Mar 08, 2020 10:44 am Post subject: |
|
|
mdavej wrote: | Point is long press sends different commands than short. So those buttons have 2 commands each. So you need to test both. |
You are right. I just tried it and long press vs short press does seem to give different results. But the problem is that the bindings are reversed -- i.e. 'long press' gives the binding associated with Rewind, while 'short press' gives the binding associated with 'SkipBack'. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Sun Mar 08, 2020 11:07 am Post subject: |
|
|
That’s ok. I probably got that backwards. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Sun Mar 08, 2020 12:09 pm Post subject: |
|
|
Thanks for the settings.bin file agruber11, that does confirm that there are 2 versions of this remote, yours with sig 257502 and the original with sig 257501. I have modified my RDF zip file to include RDFs for both versions.
But I think your RDF is good to go, let me know if you have any problems with it.
Note: I have slightly renamed the RDF (I added v2 to the title), so if you do re-download it, be sure to delete the old one first. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
agruber11
Joined: 29 Feb 2020 Posts: 14
|
Posted: Sun Mar 08, 2020 12:39 pm Post subject: |
|
|
The Robman wrote: | Thanks for the settings.bin file agruber11, that does confirm that there are 2 versions of this remote, yours with sig 257502 and the original with sig 257501. I have modified my RDF zip file to include RDFs for both versions.
But I think your RDF is good to go, let me know if you have any problems with it.
Note: I have slightly renamed the RDF (I added v2 to the title), so if you do re-download it, be sure to delete the old one first. |
Thanks again for all your help. I don't think I'll report any errors -- as I've gotten what I wanted from the remote (the ability to set HDMI inputs -- and transfer these IR codes to my 'real' (non-JP1) remote). I don't actually plan on using the remote again, unless I find I need to add further codes. |
|
Back to top |
|
|
|