|
JP1 Remotes
|
View previous topic :: View next topic |
Author |
Message |
wires10
Joined: 15 Nov 2004 Posts: 5
|
Posted: Fri Feb 21, 2020 2:02 am Post subject: Nokia32/RCMM toggle |
|
|
I'm recently back to JP1 after a several year foray into URC HomeSet/HomePro. It had a lot of nice things but the overhead was problematic...
Anyway RMIR, IRScope, OARUSB04G and ARRX18G are very nice! Things have certainly come a long way since my first Cinema7 and parallel port interfaces!
The problem I'm having is with a Arris MXv4 IR remote which works my IPTV DVR. I couldn't find a upgrade that worked (that doesn't mean one isn't here!) so I made one using IRScope. It works great except I can't figure out the toggle. This results in second presses of buttons not working. So to skip forward more than 30 seconds I have to press SKIP, PLAY, SKIP, PLAY... Not handy. I suppose I could create a macro but there are other places where the lack of a toggle is problematic.
The section below contains 4 presses of the REPLAY button. The first two are from the Arris MXv4 IR remote that have the toggle and the last two are from my upgrade on a OARUSB04G which sends more or less the same thing each time.
Any help on how to make the toggle work in a RMIR upgrade or other method would be greatly appreciated!
Code: | DECODES:
# Frequency Protocol Device OBC Hex Note Misc Start End Error
1 35714 Nokia32 37.0 77 4D + 2 copies: X=38 T=0 0 53
2 35699 Nokia32 37.0 77 4D + 2 copies: X=38 T=1 0 53
3 35156 Nokia32 37.0 77 4D + 2 copies: X=0 T=0 0 53
4 35029 Nokia32 37.0 77 4D + 2 copies: X=0 T=0 0 53
RAW TIMING DATA:
1: +396 -288 +156 -288 +168 -588 +184 -416 +184 -432 +168 -288 +168 -260 +156 -288 +168 -260 +184 -260 +168 -616 +156 -444 +184 -588 +168 -432 +184 -260 +168 -788 +168 -432 +168 -89532 +412 -288 +168 -260 +184 -588 +184 -444 +156 -444 +156 -288 +168 -260 +168 -276 +168 -288 +168 -260 +156 -616 +168 -432 +184 -588 +168 -432 +168 -288 +156 -788 +168 -432 +168 -89532 +412 -288 +168 -260 +184 -588 +168 -432 +168 -460 +168 -260 +156 -288 +168 -288 +156 -260 +168 -288 +168 -604 +168 -432 +168 -604 +168 -432 +168 -288 +168 -760 +156 -444 +184 -490144
2: +396 -288 +156 -288 +168 -588 +184 -432 +168 -432 +168 -288 +168 -260 +184 -260 +168 -288 +156 -616 +168 -576 +168 -460 +168 -588 +184 -416 +184 -260 +168 -788 +156 -444 +156 -89560 +424 -260 +156 -288 +168 -588 +184 -432 +168 -432 +168 -288 +168 -260 +184 -260 +168 -288 +156 -616 +168 -604 +168 -432 +168 -588 +184 -432 +168 -260 +168 -788 +156 -444 +156 -89544 +412 -288 +156 -288 +168 -588 +184 -432 +168 -432 +168 -288 +168 -260 +184 -260 +168 -288 +156 -588 +168 -604 +168 -460 +168 -588 +184 -416 +184 -260 +168 -788 +156 -444 +156 -489172
3: +428 -258 +185 -258 +170 -601 +171 -458 +170 -430 +170 -287 +156 -287 +170 -287 +156 -287 +170 -258 +185 -258 +171 -286 +171 -258 +185 -429 +171 -286 +171 -758 +185 -429 +171 -89915 +413 -258 +185 -258 +171 -615 +185 -429 +171 -429 +171 -286 +171 -272 +171 -286 +171 -258 +185 -258 +170 -287 +156 -287 +170 -287 +156 -444 +156 -287 +170 -787 +156 -444 +156 -89915 +414 -286 +171 -272 +171 -615 +156 -444 +185 -429 +171 -286 +171 -258 +185 -258 +170 -287 +156 -287 +170 -258 +185 -258 +171 -286 +171 -429 +185 -258 +171 -786 +185 -444 +156 -491672
4: +428 -258 +185 -257 +172 -600 +171 -457 +172 -428 +172 -286 +156 -286 +172 -257 +185 -258 +171 -286 +171 -272 +171 -286 +171 -258 +185 -429 +171 -286 +171 -758 +185 -429 +171 -89915 +414 -257 +185 -258 +171 -615 +185 -429 +171 -457 +172 -257 +185 -258 +171 -286 +171 -258 +185 -257 +172 -286 +156 -286 +172 -286 +156 -444 +156 -286 +172 -786 +156 -444 +156 -89915 +414 -286 +171 -258 +185 -615 +156 -444 +156 -444 +185 -257 +172 -286 +156 -286 +172 -286 +156 -286 +172 -257 +185 -258 +171 -286 +171 -429 +185 -258 +171 -786 +171 -429 +185 -491672
ANALYSED TIMING DATA:
1: Protocol=Nokia32 Device=37.0 OBC=77
IRP form: {35.7k,msb}<-168u|167u,-274u>(<1:-1|1:-2|1:-3|1:-4>(407u,-288u,A:32,173u,-89.5m)+){A=$2500264D}; Alt leadout form: ^100m
Repeat: +407 -288 +167 -274 +174 -598 +169 -436 +169 -436 +167 -274 +167 -274 +167 -274 +167 -274 +167 -274 +174 -598 +169 -436 +174 -598 +169 -436 +167 -274 +164 -779 +169 -436 +173 -89532
2: Protocol=Nokia32 Device=37.0 OBC=77
IRP form: {35.7k,msb}<-40u|170u,-274u>(<1:-1|1:-2|1:-3|1:-4|1:-5|1:-6|1:-7|1:-8|1:-9|1:-10|1:-11|1:-12|1:-13|1:-14|1:-15|1:-16>(411u,-280u,A:64,156u,-89.6m)+){A=$08440000884840D4}; Alt leadout form: ^100m
Repeat: +411 -279 +170 -274 +165 -594 +172 -436 +172 -436 +170 -274 +170 -274 +170 -274 +170 -274 +165 -594 +165 -594 +172 -436 +165 -594 +172 -436 +170 -274 +168 -788 +172 -436 +156 -89552
3: Protocol=Nokia32 Device=37.0 OBC=77
IRP form: {35.2k,msb}<-168u|172u,-274u>(<1:-1|1:-2|1:-3|1:-4>(418u,-266u,A:32,162u,-89.9m)+){A=$2500004D}; Alt leadout form: ^99m
Repeat: +418 -267 +172 -274 +171 -610 +173 -437 +173 -437 +172 -274 +172 -274 +172 -274 +172 -274 +172 -274 +172 -274 +172 -274 +172 -274 +173 -437 +172 -274 +171 -777 +173 -437 +161 -89915
4: Protocol=Nokia32 Device=37.0 OBC=77
IRP form: {35.0k,msb}<-168u|173u,-272u>(<1:-1|1:-2|1:-3|1:-4>(419u,-266u,A:32,171u,-89.9m)+){A=$2500004D}; Alt leadout form: ^99m
Repeat: +419 -267 +173 -272 +176 -610 +170 -439 +170 -439 +173 -272 +173 -272 +173 -272 +173 -272 +173 -272 +173 -272 +173 -272 +173 -272 +170 -439 +173 -272 +171 -777 +170 -439 +171 -89915
|
|
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4500
|
Posted: Fri Feb 21, 2020 10:05 am Post subject: |
|
|
Choose protocol Nokia32 Combo, Device 37, Subdevice 0, and "Toggle" in the High x-bit drop-down. Enter 38 or 0 in each X column in the functions tab to match your decodes. |
|
Back to top |
|
|
wires10
Joined: 15 Nov 2004 Posts: 5
|
Posted: Fri Feb 21, 2020 12:31 pm Post subject: |
|
|
Mdavej, thank you so much for the helpful and quick reply!
I'll have to wait and try it out on the STB tonight but I'm getting a toggle now. AnalysIR is showing the toggle but the code number is not what I expect. OTOH IRScope seems happy!
Getting one's toolbox in order is a tricky thing... |
|
Back to top |
|
|
Barf Expert
Joined: 24 Oct 2008 Posts: 1402 Location: Munich, Germany |
Posted: Fri Feb 21, 2020 2:15 pm Post subject: |
|
|
Let me reformulate Dave's post: The toggle ("T") is not really a parameter like the others, you leave it to the sending device/program to generate it, alternating between 0 and 1 without the user have to worry (thereby the name "toggle").
Please try IrScrutinizer instead of IrScope and AnalysIR. IrScope is no more maintained since 10 years or so (and have a bunch of shortcomings), AnalysIR is non-free software which probably uses a slightly different parametrization of the protocol -- as seem to have discovered. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|