Transfer Nevo C2 to Nevo C3

Since EZ-RC has closed down, JP1 is your only option to get these remotes upgrades. We will (eventually) support all remotes formerly supported by EZ-RC, including the Moster Revolution 200.

Moderator: Moderators

Post Reply
iboston
Posts: 71
Joined: Fri Nov 18, 2011 2:45 pm

Transfer Nevo C2 to Nevo C3

Post by iboston »

I got a nevo C3, and i was hoping to somehow easily transfer the contents of my Nevo C2 to the Nevo C3.

Is there an easy way, or am i going to have to start rebuilding my favorites, and icons, and activities and devices?

Thanks - Hope you bring good news. I was thinking i could just write the image of my C2 to the C3 , but i know there are differences and didn't want to chance that.
Remote : URC-7780 & URC-10820N
mathdon
Expert
Posts: 4726
Joined: Tue Jul 22, 2008 8:53 am
Location: Cambridge, UK

Post by mathdon »

iboston wrote:I was thinking i could just write the image of my C2 to the C3
Yes you can. Just save your C2 setup as a .rmir file and then upload that file to the C3. You will get a warning message about the signature being different, but you can just say do it anyway. This is one of the few cases where remotes with different signatures are entirely compatible.
Graham
iboston
Posts: 71
Joined: Fri Nov 18, 2011 2:45 pm

Post by iboston »

Thank you.. Worked like a charm...
Remote : URC-7780 & URC-10820N
iboston
Posts: 71
Joined: Fri Nov 18, 2011 2:45 pm

Post by iboston »

Does the same thing apply if you got an Xsight remote in the mix?
Remote : URC-7780 & URC-10820N
mdavej
Expert
Posts: 4631
Joined: Wed Oct 08, 2003 7:08 am

Post by mdavej »

Yes as long as they are not the Lite model.
iboston
Posts: 71
Joined: Fri Nov 18, 2011 2:45 pm

Post by iboston »

Thank you all... :D
Remote : URC-7780 & URC-10820N
Post Reply