VU+ Solo2 Discrete ON/OFF

[The Robman]

I need discrete on and discrete off because when I want change activity from watch TV to watch movie my vu solo2 stay powered on .

The codes for discrete on and off are in the first post. What I meant was, please explain exactly how you're trying to program them and what isn't working. Given that this is your first post ever in the JP1 forums, we don't automatically assume that you know what you're doing, hence the questions.

If you do know how to use JP1, please state as much. If you don't, we're here to help.

[KarolS]

Hello
First of all sorry for my pure english...
I know that I'm new on this forum but I've been reading this forum for few weeks.

I've got One for all URC-7955 remote and "special" cable (it's working good. I can upload and download configuration from remote).

My devices are:
TV - Technika 50SM240 witch uses RC1910 remote( same as sharp TV's)
SAT- VU+ SOLO2
AMP - DENON x1000
Media - Xiaomi MiBox 3
DVD - Samsug Blu-ray F5300 (but forget about it I'm not using it)

Now I got a problem - when I'm changing activity from Watch TV (TV+SAT+AMP) to Watch Movie (TV+Media+AMP) TV swith off , SAT stay ON AMP go OFF then switch ON ...

Now I try add discret codes for my VU Solo2 but I can use "Device combiner (Protocol 01 44)". I don't see it in RM when I chose URC-7955.

I'm using this instruction:

After a lot of tests, it works !
I do exactly as mdavej told me but have some difficulties to find the right settings.
Summary:
* In SETUP tab, choose Device combiner (Protocol 01 44).
* In DEVICE COMBINER tab, add 3 protocols

- The 1st is MCE (Protocol 01 2A) with Device=16 and OEM2=82.
I use this protocol for all functions except discrete power.
- The 2nd is RC6-M-32 (Protocol 01 2A) with Device=128, Sub-device=21008 (16+256*82+0), M=6, RC6 T-bit=0, MCE toggle=no.
I use this protocol for Discrete ON (EFC=050).
- The 3rd is RC6-M-32 (Protocol 01 2A) with Device=128, Sub-device=21136 (16+256*82+128), M=6, RC6 T-bit=0, MCE toggle=no.
I use this protocol for Discrete OFF (EFC=050).

* In FUNCTION tab, create all function choosing the right device and the right EFC.

Thanks to everyone for support.

[zdzislaw22]

You have plenty of other possibilities to implement discrete on/off for E2 receiver.
1 - use 2 different macros to power on/off
2 - modify keymap definition file in e2 to use one button for power on and another for power off

Both have been successfully tested and work like a charm.