View previous topic :: View next topic |
Author |
Message |
landav
Joined: 25 Apr 2004 Posts: 1
|
Posted: Sun Apr 25, 2004 9:38 am Post subject: Code Problems Help me Pls |
|
|
I have a radioshack 15-2117 and I'm trying to teach it a Samsung DVD-V3500 DVD VCR combo. I have tried all the samsung stuff from Yahoo and no go. The main problem I have is the power button I have problems with other buttons but I want to focus on this one. Since the RS remote I have does not allow you to learn to the power button I learn the power button to another key the #1 key for example and then I test it and it works. If I press it the the #1 the unit turns off and press it again and it turns on.
Here's the big problem I then download from remote to IR and look at codes and I have tried just editing the learned power command on #1 to the power button and the power button does not work like it did when assigned to the #1. I have also taken the code Protocol NECx2 Device 5 Sub device 5 efc 037 and created a device in remote master and brought it into IR and uploaded the config to the remote.
It appears that I can learn the power button but as soon as I write it to the remote with IR it no longer works.
Any ideas?
Landav
Thanks in advance. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Sun Apr 25, 2004 11:28 am Post subject: |
|
|
Try this upgrade, it only has one button programmed because you only specified the EFC for the POWER button, but here goes...
Upgrade Code 0 = 27 D0 (DVD/2000)
5A 00 11 31 5F 5F 71
End _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|