View previous topic :: View next topic |
Author |
Message |
billbgarland
Joined: 11 Jun 2018 Posts: 6
|
Posted: Wed Sep 05, 2018 2:00 am Post subject: URC 1210 |
|
|
I have a URC 1210 remote. It has a JP1 connector and when I connect it via RMIR it can read the device and reports that its a URC 1280 (contour 8).
I have tried to load a new device but is does not seem to work.
Is this remote compatible with RMIR? |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4519
|
|
Back to top |
|
|
billbgarland
Joined: 11 Jun 2018 Posts: 6
|
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4519
|
|
Back to top |
|
|
billbgarland
Joined: 11 Jun 2018 Posts: 6
|
Posted: Wed Sep 05, 2018 10:44 am Post subject: |
|
|
I tried to upload both file before. Now combined in a ZIP |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4519
|
Posted: Wed Sep 05, 2018 11:00 am Post subject: |
|
|
I replaced your file with mine. I added an RMIR "... with SAT" for you to try. To switch to SAT mode, tap SETUP then GREEN. To switch back to TV, tap SETUP then RED. I put SkipFwd on the bottom right button and PrevChannel on the bottom left button. I set up the Vol/Mute buttons to always control the TV volume.
If my file doesn't work, that means it's not possible to add a second device to this one device remote. But we could try to make the one device we do have work functions of both the TV and SAT if you tell me which functions you want. |
|
Back to top |
|
|
billbgarland
Joined: 11 Jun 2018 Posts: 6
|
Posted: Wed Sep 05, 2018 11:03 am Post subject: |
|
|
Thanks. I will try tonight and let you know how I get on |
|
Back to top |
|
|
billbgarland
Joined: 11 Jun 2018 Posts: 6
|
Posted: Thu Sep 06, 2018 2:00 am Post subject: |
|
|
Thanks Dave, I can confirm your magic worked and now talks to my Sat box |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4519
|
Posted: Thu Sep 06, 2018 8:29 am Post subject: |
|
|
Glad to hear it.
To summarize,
- The 1210 uses the same RDF as the 1280 and has the same functionality (learning, macros, keymoves, vol/transport/channel punch-thru)
- All device buttons on the 1210 are phantom and can only be accessed via macros
- The 1210 should be able to control 10 devices like the 1280, the only difference being that all must be accessed via macros
The same probably applies to the URC1240 as well, except that it has 4 real devices (TV, SAT, AMP, DVD) and 6 phantom devices.
In your case, I added your Bush FSAT upgrade and assigned it to the (phantom) SAT button. Your TV device already had a code assigned by you, so no upgrade was needed for that one. I made 2 macros for switching devices - Shift-GREEN has one step which is SAT, and Shift-RED has one step which is TV. I also made TV the volume punch-thru device for every other device.
Here are the URC support pages for these models, where you can download manuals and code lists:
https://www.oneforall.com/faq/59-remotes/4296-contour-remotes-urc1210-1280/ |
|
Back to top |
|
|
Tralalainan
Joined: 03 Jun 2019 Posts: 1
|
Posted: Mon Jun 03, 2019 4:21 pm Post subject: Re: URC 1210 |
|
|
billbgarland wrote: | I have a URC 1210 remote. It has a JP1 connector and when I connect it via RMIR it can read the device and reports that its a URC 1280 (contour 8).
I have tried to load a new device but is does not seem to work.
Is this remote compatible with RMIR? |
Hi all,
Where can I find a JP cable for URC 11-1210? I can't seem to find any in europe. Only one in Canada. Any ideas?
Thanks, |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
|
Back to top |
|
|
|