Ocilion T220 IPTV stb

gulyasal · Post by **gulyasal** » Sat Mar 10, 2018 11:37 am

I recently switched to fibre optic in my neighbourhood, and my new Internet/telephone/TV provider gave me a new (never heard of) STB for which I cannot find a bin file to use in conjunction with my Slingbox 500.

Can you help me? My set top box is called an Ocilion T220. It shows up on my Logitech Harmony inventory (although the Menu button was coded incorrectly and I had to amend the repeat to one time). It is used in conjunction with Ruwido Universal remote (looks a bit like the m_2).

Can anyone help me?

Alex.

alanrichey · Post by **alanrichey** » Mon Mar 12, 2018 1:41 am

I can sort it out for you but not for 10 days as I am out of the country on holiday without access to my 'kit'. Maybe someone else can step in ?

Post by **The Robman** » Mon Mar 12, 2018 6:04 pm

We don't have anything by Ocilion or called T220 in the file section, so unless someone else has a Harmony and can capture the signals from it, we'll need to wait for Alan.

chuliu · Post by **chuliu** » Tue Mar 13, 2018 9:04 am

http://www.hifi-remote.com/forums/dload ... e_id=25125

I captured the ocilion t220 but unfortunately it is a new protocol which needs decode.

Post by **The Robman** » Tue Mar 13, 2018 5:46 pm

Are you using a custom RDF or something for your remote chuliu? I get errors when I try to open your file.

First message says:
Map file USB8006.map does not exist. A default button layout will be used.

Second message says:
Error loading file OCILION T220.rmir

Post by **The Robman** » Tue Mar 13, 2018 5:53 pm

I found the map here (don't know why it isn't already in the Maps folder as I just downloaded the latest RM) so now I just get the second message.

chuliu · Post by **chuliu** » Tue Mar 13, 2018 9:54 pm

The Robman wrote:I found the map here (don't know why it isn't already in the Maps folder as I just downloaded the latest RM) so now I just get the second message.

Re-downloaded the file with rmir 206b3 and uploaded again here. Hopefully it will work.

3FG · Post by **3FG** » Wed Mar 14, 2018 12:49 am

Code: Select all

{36k,332,msb}<-1,1|1,-1>(1:1,D:8,S:2,F:8,100m)+ 
Input	  187.0    126     +7 repeats  
0   	   187.0    125     +7 repeats  
9   	   187.0    129     +2 repeats  
8   	   187.0    130     +3 repeats  
7   	   187.0    133     +2 repeats  
6   	   187.0    134    
5   	   187.0    137    
4   	   187.0    138    
3   	   187.0    141    
2   	   187.0    142     +3 repeats  
1   	   187.0    145     +1 repeats  
Stop	   187.0    74      +2 repeats  
Record	 187.0    73      +1 repeats  
FastFwd	187.0    78      +3 repeats  
Pause	  187.0    86      
Rewind	 187.0    81      +1 repeats  
Skip	   187.0    77      +3 repeats  
Play	   187.0    86      +7 repeats  
Replay	 187.0    82      +1 repeats  
Blue	   187.0    157     +1 repeats  
Yellow	 187.0    158      
Green	  187.0    242     +3 repeats  
Red		 187.0    245     +7 repeats  
Mute	   187.0    102     +1 repeats  
Ch-		 187.0    105     +5 repeats  
Ch+		 187.0    117      
Right	  187.0    110     +7 repeats  
Left	   187.0    114     +1 repeats  
Down	   187.0    106     +1 repeats  
Up		  187.0    118     +7 repeats  
OK		  187.0    113     +1 repeats  
Vol-	   187.0    109     +7 repeats  
Vol+	   187.0    121      
Exit	   187.0    126     +7 repeats  
Info	   187.0    101     +1 repeats  
Guide	  187.0    113      
Menu	   187.0    69      +2 repeats  
Power	  187.0    146      
Soft1	  187.0    98       
Soft2	  187.1    85      +7 repeats  
Soft3	  187.1    86      +7 repeats

chuliu · Post by **chuliu** » Wed Mar 14, 2018 10:29 am

Hi, I tried to create a custom upgrade. It took me sometime to realise that this is a "phase encoding" So far I have the following:
lead in =(330,-330)
1 pair=(330,-330)
0 pair=(-330,330)
msb
device 1(8 bit)=68
device 2(4 bit)=13
command 1 (6 bit) for 1 to 6 are 46,49,50,53,54,57
lead out =-113012

The thing is that I don't know how to specify that 0 pair starting with a silence of -330, instead of a on pulse. If someone can tell me how to do it, I will create bin file for it.

chuliu · Post by **chuliu** » Wed Mar 14, 2018 10:42 am

NVM.
I saw 3FG's post and I now have:
lead in =(330,-330)
1 pair=(-330,330)
0 pair=(330,-330)
msb
d1(8bit)=187
command 1( or sub device, 2 bit)=0 or 1
command 2(8 bit)= as 3fg's post.

Just waiting for someone to shed some light.

3FG · Post by **3FG** » Wed Mar 14, 2018 12:21 pm

You can use RMPB and see an example by importing the RC5 executor. On the Assembler tab where the 0 burst times are defined you can set "Xmit 0 Reversed" to Yes.

chuliu · Post by **chuliu** » Wed Mar 14, 2018 1:44 pm

http://www.hifi-remote.com/forums/dload ... e_id=25130

http://hifi-remote.com/forums/dload.php ... e_id=25131

https://docs.google.com/spreadsheets/d/ ... sp=sharing
here are the rmdu along with pb file.
I can't make 1 as -330,330 and instead I made 1=330.-330 while 0=-330,330. Or so I think I am correct.

as a result, device is 68, command 1 is 3 or 2, while cbyte2 is binary complement to 3fg's value. In fact command 1 is also binary complement. to 3fg's value.

The xmit reversed is yes. However, I know that my signal is different to the original signal starting at bit 15, excluding the lead in bytes. I don't know why. Maybe you can help me debug. Thanks.

I attached the spreadsheet for my work on google drive.

_________________________________________________edit line

I found out the reason for my failure. It was because I didn't change the device data in the manual protocol. The device bits number and command bits number should be changed from 8 to the correct numbers. After I changed it, I think the rmdu file is working.

I have uploaded the correct file.

Post by **The Robman** » Wed Mar 14, 2018 3:11 pm

I didn't see these previous posts while I worked on this myself.

The following zip file includes my PB, KM and RMDU files, along with the various text files of the learns as I had to do this one by hand, as RMIR couldn't parse it properly.
http://www.hifi-remote.com/forums/dload ... e_id=25133

Here are the Slingbox bin files:
http://www.hifi-remote.com/forums/dload ... e_id=25132

alanrichey · Post by **alanrichey** » Sat Mar 24, 2018 5:09 am

Back from holiday, thanks to all for pitching in, I assume I am no longer required

Post by **The Robman** » Sat Mar 24, 2018 11:28 am

alanrichey wrote:Back from holiday, thanks to all for pitching in, I assume I am no longer required

No idea, we made the mistake of helping gulyasal before verifying that he was actually watching this thread. We should have learned from your mistakes and posted a meaningless question first just to see if he'd respond.