31473147 Insignia NS-RC01G-09

dnick · Post by **dnick** » Fri Feb 19, 2016 8:19 am

I have an Insignia NS-RC07A-11 and need an RDF file for it. I have uploaded a raw download and photo of the remote for review here:
https://www.hifi-remote.com/forums/dload ... e_id=13934

jackching · Post by **jackching** » Thu Mar 01, 2018 4:45 pm

My NS-RC01G-09 insignia is not detected by RMIR. I've uploaded the err file here: https://www.hifi-remote.com/forums/dload ... e_id=25105 I used this pinout:

JP1.3 ---> FTDI Signal Name
Pin
1 --------------- Not connected
2 --------------- RTS (YELLOW)
3 --------------- Ground (BLACK)
4 --------------- TXD (GREEN)
5 --------------- Not Connected
6 --------------- RXD (WHITE)

This is the cable i bought and the color diagram is posted in the ebay description: https://www.ebay.com/itm/152712195878

Any help appreciated.

jackching · Post by **jackching** » Fri Mar 02, 2018 4:45 pm

The remote will go into serial comm mode but the software still wont detect it.

Post by **mathdon** » Fri Mar 02, 2018 5:37 pm

RMIR has an RDF for Insignia NS-RC05A-11 but I don't see one for the NS-RC01G-09, so it should not be able to download your remote. You should nevertheless get a message that "No remote found with signature starting ...". I have no suggestion as to why you don't even get that message, though. Perhaps someone familiar with the remote, or with your cable, can be of more help.

jackching · Post by **jackching** » Fri Mar 02, 2018 6:05 pm

mathdon wrote:RMIR has an RDF for Insignia NS-RC05A-11 but I don't see one for the NS-RC01G-09, so it should not be able to download your remote. You should nevertheless get a message that "No remote found with signature starting ...". I have no suggestion as to why you don't even get that message, though. Perhaps someone familiar with the remote, or with your cable, can be of more help.

I do get the no remote found message

Thomas · Post by **Thomas** » Sat Mar 03, 2018 9:48 am

Is it genuine FTDI? Some clones don't work.
Are you using Windows? If so, run 'devmgmt.msc' and check whether there is a Port (COM&LPT) which is identified as belonging to the interface.
Then in RMIR, go to Remote|Interface|JP1x Serial, see whether it has been properly assigned -- e.g., if not, select Other and type in COMx, x is the port number. If that is working, RMIR should then find the remote without searching.
If you don't find a com port assigned, check whether VCP is running in USB section (devmgmt again). This Virtual Com Port driver is required for RMIR to connect with the remote.
I have Win 7, I cannot guarantee that Win 10 work identically.
Tom

Post by **The Robman** » Sat Mar 03, 2018 12:54 pm

He's getting the no remote found message, which is as expected for new remotes that have not yet had an RDF created.

HamburgerHelper1 · Post by **HamburgerHelper1** » Sat Mar 03, 2018 1:23 pm

I get 3 RDF'S to choose from on my NS-RC01G-09
they are
NS-RC05A-11
AOC 67100
Insignia 67100

The NS-RC05A-11 works perfectly for it

Post by **The Robman** » Sat Mar 03, 2018 1:33 pm

I would wait for Graham to advise on the next steps, but I'm guessing the first step should be to use the blinkback function to get the signature.

HamburgerHelper1 · Post by **HamburgerHelper1** » Sat Mar 03, 2018 1:52 pm

ya i have only done downloads on it never uploaded I am sure there is some differences in the two remotes

Post by **The Robman** » Sat Mar 03, 2018 3:16 pm

HH, what is the sig on your remote? Jack, what is the sig on yours?

HamburgerHelper1 · Post by **HamburgerHelper1** » Sat Mar 03, 2018 3:21 pm

punched it in and got sig 3147

HamburgerHelper1 · Post by **HamburgerHelper1** » Sat Mar 03, 2018 3:34 pm

Sent raw download to Diagnosis Area
file named 3147 NS-RC01G-09.ir

Post by **The Robman** » Sat Mar 03, 2018 4:20 pm

3147 matches the Insignia NS-RC05A-11, let's see what Jack gets with his Insignia NS-RC05A-09

Ps. If you want anyone to look at your Diagnosis Area file, you should post a link to it.

HamburgerHelper1 · Post by **HamburgerHelper1** » Sat Mar 03, 2018 4:31 pm

I agree with the post link idea i did not think of it at the time
Now if i can only figure out how to do that[/url]

JP1 Remotes

31473147 Insignia NS-RC01G-09

RDF for Insignia NS-RC07A-11

31473147 Insignia NS-RC01G-09

FTDI

NS-RC01G-09

NS-RC01G-09 i

NS-RC01G-09 i

NS-RC01G-09

NS-RC01G-09