JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Re-code remote - getting page up/down notof line up/down

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Beginners
View previous topic :: View next topic  
Author Message
alchad



Joined: 30 Oct 2017
Posts: 2

PostPosted: Mon Oct 30, 2017 11:26 am    Post subject: Re-code remote - getting page up/down notof line up/down Reply with quote

Hi,

Newbie and oldie, so looking for advice.

I'm trying to recode a URC-6440 to work with a Cambridge Azur 640H (It's a glorified PC based music server storing music on a hard drive which you can acces by either a very small LCD on the unit itself, or with a full screen interface if connected to say a TV).

Thanks to member 3FG who gave me some advice and also has submitted an upgrade for the 640H (see below) I've got the 6440 to partly control the 640H - I used RMIR to upload the code to the remote.

http://hifi-remote.com/forums/dload.php?action=file&file_id=14767

However, one immediate problem is that although the left/right buttons adjacent to the "OK" button work fine, the up and down ones do not. What seems to be happening is that they seem to be working as page up/down (I think). For instance in a menu list the controller will not select the options immdeiately above or below. BUT, if there are say 10 or more options (as in selecting a music track when there are 12 to chooose from), when the down button is keyed, the selection goes from track one to track 10.

I was hoping if someone could point me in the direction of how I start fixing.

Many thanks.

Alan C
Back to top
View user's profile Send private message
3FG
Expert


Joined: 19 May 2009
Posts: 3239

PostPosted: Mon Oct 30, 2017 12:41 pm    Post subject: Reply with quote

I based the upgrade on
http://newarchive.cambridgeaudio.com/media/azur-640h-rs232-protocol-1358774906.pdf
It may be worth trying the Page up and Page down commands, which I mapped to Ch+/Ch- in the upgrade.
Back to top
View user's profile Send private message
alchad



Joined: 30 Oct 2017
Posts: 2

PostPosted: Tue Oct 31, 2017 7:15 am    Post subject: Reply with quote

Thanks - again.

Just about to go away for a couple of weeks so will try when I get back.

Regards

Alan C
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Beginners All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central