View previous topic :: View next topic |
Author |
Message |
Forssux
Joined: 05 May 2017 Posts: 29
|
Posted: Wed Jun 14, 2017 1:41 pm Post subject: mix device buttons in Touchscreen |
|
|
hi there,
In my old SRT 8215 remote I could mix functions from different devices on the touchscreen buttons of a activity.
I usually mapped the different device power buttons to a touch screen button.
When I pressed the key "TV Watching" after everything executed I could rapidly repress a power button for my TV,AMP Cable
Is something like this possible on a ARRX18G
Kind Regards
Guy |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
Posted: Wed Jun 14, 2017 2:30 pm Post subject: |
|
|
I believe you can use keymoves to do that. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Wed Jun 14, 2017 3:41 pm Post subject: |
|
|
Xsight has no keymoves in RMIR, but you can assign functions from any other device in RM Buttons tab, accomplishing the same thing.
An activity ends up showing whatever soft buttons that belong to the device selected for soft buttons in the bottom pane. So any additional functions should be added to that softbuttons device.
The solutions for a combo device like this are to:
A. Add the functions in question to that selected device in the Buttons tab of RM (pick the other device at the top right)
or
B. Copy the selected device to a new device that's intended to be a combo and select it for the soft, assign other buttons from other device as desired
See fig 2 and 5 below for an example. Activity group assignment in question is row 2 with all the soft keys.
http://www.avsforum.com/forum/93-remote-control-area/1157746-acoustic-research-xsight-remote-30.html#post53472770 |
|
Back to top |
|
|
Forssux
Joined: 05 May 2017 Posts: 29
|
Posted: Thu Jun 15, 2017 10:06 am Post subject: Softbuttons |
|
|
Hi Dave,
Thanks for that advice, it seems to do the trick.
Is there a way to remove a softbutton from the list in the activity tab.
My Softbutton 4 doesn't work.
Initially I just repeated the same function twice softbutton3=softbutton4
This works for devices, however for activity There is a assist button that block the place of softbutton 1 and 2.
If I could remove the Assist softbutton I can keep the original solution, another solution is to remove softbutton4 from the list in activity.
kind regards
Guy |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Thu Jun 15, 2017 12:19 pm Post subject: |
|
|
Are you running the latest firmware? If so, then leaving all the Assist boxes blank should remove the buttons. If not, then you're stuck with it in activity mode.
The softbutton assignment gives you all softbuttons,. Can't remove just one. |
|
Back to top |
|
|
Forssux
Joined: 05 May 2017 Posts: 29
|
Posted: Thu Jun 15, 2017 4:53 pm Post subject: Assist button |
|
|
Hi Dave,
Yes I removed all Assist options, but the button stays visible in Activity mode.
Unfortunately
Guy |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
Posted: Thu Jun 15, 2017 8:36 pm Post subject: |
|
|
That gets fixed in the latest firmware, but we haven't figured out how to deliver the firmware using RMIR yet. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|