JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

One for All Remote for Panasonic TV and NVidia Shield

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Beginners
View previous topic :: View next topic  
Author Message
ijourneaux



Joined: 09 Mar 2017
Posts: 2

PostPosted: Fri Jun 09, 2017 1:24 pm    Post subject: One for All Remote for Panasonic TV and NVidia Shield Reply with quote

Try to setup my One for All remote (OARUSB04G)> I was able to learn the codes I needed for the TV (Power and Volume) but now I would like to add the NVidia Shield. Searching around, I found that you could use the FLIRC IR receiver on the Shield to control the Shield and ultimately control Kodi but I must be missing some steps.

Ideally this would all be using the one device on the remote.

Appreciate any tips.
Ian
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 18311
Location: Chicago, IL

PostPosted: Fri Jun 09, 2017 2:35 pm    Post subject: Reply with quote

We have an upgrade file for the Nvidia Shield here:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=13386

You're One For All remote (OARUSB04G) came with a standard USB cable, which you can use to connect it to your computer and program it using JP1 software (ie, a program called RMIR).
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
mdavej
Expert


Joined: 08 Oct 2003
Posts: 3693

PostPosted: Fri Jun 09, 2017 2:59 pm    Post subject: Reply with quote

Your remote already has Panasonic TV codes (TV 0250 or 10250), and we have Panasonic files, so no learning needed.
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=13568

Older Shield has IR built in, Simpleset site has codes and so do we. New Shield (2017) does indeed need FLIRC. But you can use any codes you want. MCE is probably the best fit and has a good profile. You'll have to get specifics in the FLIRC or Shield forums.

Old Shield: http://www.hifi-remote.com/forums/dload.php?action=file&file_id=13386
MCE (DVD 1972 or 21972): http://www.hifi-remote.com/forums/dload.php?action=file&file_id=11769
Back to top
View user's profile Send private message
yaworski



Joined: 22 Jun 2014
Posts: 364
Location: Warsaw, Poland

PostPosted: Fri Jun 09, 2017 3:46 pm    Post subject: Reply with quote

I wouldn't use MCE with Flirc. MCE is RC5 with a toggle bit which means you need to record every remote button twice. My best experience with Flirc is by using NECx1 or NECx2. I'm using a TV code 2051 with Flirc (setup code for a Samsung TV) which uses NECx2. Works well with both old and new Flirc.
_________________
Marcin
Back to top
View user's profile Send private message
ijourneaux



Joined: 09 Mar 2017
Posts: 2

PostPosted: Fri Jun 09, 2017 8:40 pm    Post subject: Reply with quote

Thanks very much guys will give it another shot tomorrow.
Back to top
View user's profile Send private message
Forssux



Joined: 05 May 2017
Posts: 23

PostPosted: Wed Jun 14, 2017 1:23 pm    Post subject: special subtitle buttons Reply with quote

Hi There,
I have a Shield TV 2015 to.
I found a way to use a special button for downloading subtitles
The same button longpress launches the subtitle sync screen
You just need FLIRC to put in Keyboard mode and capture the IR-command.
You'll find the files here
SPMC is Kodi but for Android.

In Flirc choose keyboard letter "g" and choose a key on your remote. capture it and voila
"g" is for downloading subtitles
"g longpress" is for syncing of your subtitles

In Flirc choose keyboard letter "h" and choose a key on your remote.
"h" is for "next audio stream often another language in DVD
"h" longpress is for next subtitle

You can see where these files need to be..
Android\data\com.semperpax.spmc16\files\.spmc\userdata\keymaps
Android\data\org.xbmc.kodi\files\.kodi\userdata\keymaps

The Py script goes here
Android/data/org.xbmc.kodi/files/.kodi/userdata/audiolanguageselect.py
Android/data/com.semperpax.spmc16/files/.spmc/userdata/audiolanguageselect.py

mark the dot before kodi and spmc its a hidden map

Best Regards
Guy
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Beginners All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central