View previous topic :: View next topic |
Author |
Message |
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Mon May 29, 2017 4:58 pm Post subject: Re: Site non working |
|
|
Impeeza wrote: | Hello, the site appears full down, any body knows how update the firmware for new or reseted remotes? | We're working on it. Why would a reset remote require an updated firmware? |
|
Back to top |
|
|
Impeeza
Joined: 03 Mar 2016 Posts: 15
|
Posted: Wed May 31, 2017 4:23 pm Post subject: Re: Site non working |
|
|
mdavej wrote: | Impeeza wrote: | Hello, the site appears full down, any body knows how update the firmware for new or reseted remotes? | We're working on it. Why would a reset remote require an updated firmware? |
Hi, When you perform a full reset using code 821 the remote geta locked state and RMIR can't find it, the screen on remote only shows the background and some garbage. the only way to get the remote working is to upload a new firmware.
Regards |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Wed May 31, 2017 4:41 pm Post subject: Re: Site non working |
|
|
Impeeza wrote: | mdavej wrote: | Impeeza wrote: | Hello, the site appears full down, any body knows how update the firmware for new or reseted remotes? | We're working on it. Why would a reset remote require an updated firmware? |
Hi, When you perform a full reset using code 821 the remote geta locked state and RMIR can't find it, the screen on remote only shows the background and some garbage. the only way to get the remote working is to upload a new firmware.
Regards | You mean 981?
In my experience a firmware upgrade can only be performed once (although this may change in the future), and garbage on the screen means the remote has failed catastrophically and cannot be recovered. I have a few remotes in that state. I recommend you tell the seller to replace your defective remote.
There is a procedure for exiting upgrade mode that you might want to try first:
http://www.hifi-remote.com/forums/viewtopic.php?p=27215#27215 (item 10) |
|
Back to top |
|
|
mathdon Expert
Joined: 22 Jul 2008 Posts: 4523 Location: Cambridge, UK |
Posted: Wed May 31, 2017 5:41 pm Post subject: |
|
|
mdavej wrote: | There is a procedure for exiting upgrade mode that you might want to try first (item 10) |
For the XSight Touch, that says hold Power and OK while putting the battery back in. But the Touch is rechargeable and, as far as I am aware, the battery cannot be removed. Do you know what the instructions really are for the Touch? With the possibility (not yet known) of RMIR being able to do a firmware upgrade, it would be very helpful to know what to do to get it out of a stuck upgrade. _________________ Graham |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Wed May 31, 2017 7:59 pm Post subject: |
|
|
Should work as posted. Touch battery IS removable. |
|
Back to top |
|
|
mathdon Expert
Joined: 22 Jul 2008 Posts: 4523 Location: Cambridge, UK |
Posted: Thu Jun 01, 2017 12:03 pm Post subject: |
|
|
mdavej wrote: | Should work as posted. Touch battery IS removable. |
So it is . Stupid me . _________________ Graham |
|
Back to top |
|
|
|