EZ-RC Site No Longer Working

Since EZ-RC has closed down, JP1 is your only option to get these remotes upgrades. We will (eventually) support all remotes formerly supported by EZ-RC, including the Moster Revolution 200.

Moderator: Moderators

mdavej
Expert
Posts: 4631
Joined: Wed Oct 08, 2003 7:08 am

Re: Site non working

Post by mdavej »

Impeeza wrote:Hello, the site appears full down, any body knows how update the firmware for new or reseted remotes?
We're working on it. Why would a reset remote require an updated firmware?
Impeeza
Posts: 15
Joined: Thu Mar 03, 2016 2:58 pm

Re: Site non working

Post by Impeeza »

mdavej wrote:
Impeeza wrote:Hello, the site appears full down, any body knows how update the firmware for new or reseted remotes?
We're working on it. Why would a reset remote require an updated firmware?
Hi, When you perform a full reset using code 821 the remote geta locked state and RMIR can't find it, the screen on remote only shows the background and some garbage. the only way to get the remote working is to upload a new firmware.

Regards
mdavej
Expert
Posts: 4631
Joined: Wed Oct 08, 2003 7:08 am

Re: Site non working

Post by mdavej »

Impeeza wrote:
mdavej wrote:
Impeeza wrote:Hello, the site appears full down, any body knows how update the firmware for new or reseted remotes?
We're working on it. Why would a reset remote require an updated firmware?
Hi, When you perform a full reset using code 821 the remote geta locked state and RMIR can't find it, the screen on remote only shows the background and some garbage. the only way to get the remote working is to upload a new firmware.

Regards
You mean 981?

In my experience a firmware upgrade can only be performed once (although this may change in the future), and garbage on the screen means the remote has failed catastrophically and cannot be recovered. I have a few remotes in that state. I recommend you tell the seller to replace your defective remote.

There is a procedure for exiting upgrade mode that you might want to try first:
http://www.hifi-remote.com/forums/viewt ... 7215#27215 (item 10)
mathdon
Expert
Posts: 4725
Joined: Tue Jul 22, 2008 8:53 am
Location: Cambridge, UK

Post by mathdon »

mdavej wrote:There is a procedure for exiting upgrade mode that you might want to try first (item 10)
For the XSight Touch, that says hold Power and OK while putting the battery back in. But the Touch is rechargeable and, as far as I am aware, the battery cannot be removed. Do you know what the instructions really are for the Touch? With the possibility (not yet known) of RMIR being able to do a firmware upgrade, it would be very helpful to know what to do to get it out of a stuck upgrade.
Graham
mdavej
Expert
Posts: 4631
Joined: Wed Oct 08, 2003 7:08 am

Post by mdavej »

Should work as posted. Touch battery IS removable.
mathdon
Expert
Posts: 4725
Joined: Tue Jul 22, 2008 8:53 am
Location: Cambridge, UK

Post by mathdon »

mdavej wrote:Should work as posted. Touch battery IS removable.
So it is :D . Stupid me :oops: .
Graham
Post Reply