Doop HDMP-200

janagn · Post by **janagn** » Fri May 12, 2017 2:41 pm

Hello all,

I have purchased this box ( http://www.plaisio.gr/thleoraseis/perif ... MP-200.htm ) to use it with my slingbox. As usual, the remote control codes are elusive. Any help will be much appreciated.

UPDATE:
Have found so far the following possibly usefull links
1. http://www.clurc.net/dbview.aspx?id=578566
2. http://all-remote-controls.co.uk/en/DOO ... P-200.html

From a Chineese site I got this as well.

FileFormat=PRCTOOL
Remote control descripe=:
keymap=universal
Device=DTT
Brand=DOOP
Model=HDMP-200

Button's counts=51
0,D00=0051 0 FF 59
17,TEXT=0051 0 FF 18
21,TV=0051 0 FF 15
31,D31=0051 0 FF 3
32,D32=0051 0 FF 51
33,D33=0051 0 FF 40
34,D34=0051 0 FF 13
35,D35=0051 0 FF 4D
38,D38=0051 0 FF 17
39,D39=0051 0 FF 42
40,D40=0051 0 FF 40
41,D41=0051 0 FF 0
42,D42=0051 0 FF 3
4,D04=0051 0 FF 15
22,D22=0051 0 FF 6
5,D05=0051 0 FF 0
23,D23=0051 0 FF 5A
24,OK=0051 0 FF 1A
25,D25=0051 0 FF 1B
3,MENU=0051 0 FF 45
26,D26=0051 0 FF 16
2,EXIT=0051 0 FF 5
27,VOL+=0051 0 FF 1B
13,D13=0051 0 FF 55
30,CH+=0051 0 FF 6
28,VOL-=0051 0 FF 5A
9,MUTE=0051 0 FF 19
29,CH-=0051 0 FF 16
6,1=0051 0 FF 52
7,2=0051 0 FF 50
8,3=0051 0 FF 10
10,4=0051 0 FF 56
11,5=0051 0 FF 54
12,6=0051 0 FF 14
14,7=0051 0 FF 4E
15,8=0051 0 FF 4C
16,9=0051 0 FF C
18,D18=0051 0 FF 4D
19,0/10=0051 0 FF F
20,D20=0051 0 FF 55
253,TVPOW=0051 0 FF 59
82,S RED=0051 0 FF 7
83,S GREEN=0051 0 FF 4A
84,S YELLOW=0051 0 FF 46
85,S BLUE=0051 0 FF 48
65,S UP=0051 0 FF D
67,S OK=0051 0 FF 4
69,S DOWN=0051 0 FF 11
56,S I+=0051 0 FF E
52,S MUTE=0051 0 FF 12
296,S TVPOW=0051 0 FF 59

Kind Regards
Yiannis

Post by **The Robman** » Fri May 12, 2017 9:35 pm

I feel confident that the first number in each string is the OBC, but the hex codes posted don't agree, and in fact, they aren't even unique, several buttons have the same hex code.

alanrichey · Post by **alanrichey** » Sat May 13, 2017 12:30 am

How about this: https://www.hifi-remote.com/forums/dload ... e_id=14534

janagn · Post by **janagn** » Sat May 13, 2017 1:06 am

alanrichey wrote:How about this: https://www.hifi-remote.com/forums/dload ... e_id=14534

As usual you are correct quick helpful and a great honour for us to know you.

The only button that seems not to work is the Up channel. But tell me, how did you came up with it so quickly? Was data in my initial post of any help?

Update: Also for reason of completion...
Custom 10 -> Audio Language
Custom 12 -> Radio/Tv
Custom 13 -> Fav
Custom 14 ->
Custom 15 -> Teletext
Custom 16 -> Remove USB device
Custom 17 -> Subtitles
Custom 18 -> View schedule/Recording plan
Custom 19 -> Access USB port

Yiannis

alanrichey · Post by **alanrichey** » Sat May 13, 2017 1:44 am

Sorry about that, finger trouble, I put in 5 instead of 6. Link updated.

The reason I can do it is that your box was in the Logitech Harmony database. So I installed it on my Harmony and then I have a clone of your remote in my hand to analyse.

I just set the Custom buttons according to the database. And they are as detailed in the Readme file (You did read that I hope?). The differences are that:

Custom 11 is down as 'Go To'
Custom 14 is down as 'Repeat'
Custom 16 is down as 'PVR'
Custom 18 is down as 'Timer'
Custom 19 is down as 'TimeShift'

Odd.

janagn · Post by **janagn** » Sat May 13, 2017 1:54 am

Yes you are right as always... I was just eager to help but you beat me there again. Your terminology on the custom is better than mine

Again thank you for the fantastic support

Post by **The Robman** » Sat May 13, 2017 10:20 am

For those that are interested, this device uses NEC1 dev 0 (the "0 FF" should have been a clue) and the final byte of hex posted is the OBC in hex form. So my guess is the numbers posted are the position on the PCB, perhaps, but from an IR signal point of view, they're meaningless.

Al's upgrade includes many OBCs not listed above, and it includes all of those listed.

For anyone wanting to add this device to a remote, here is an RM file:
https://www.hifi-remote.com/forums/dload ... e_id=14535