View previous topic :: View next topic |
Author |
Message |
unclemiltie Expert
Joined: 21 Jan 2004 Posts: 1795 Location: Pittsburgh, PA |
Posted: Sun Apr 09, 2017 10:50 pm Post subject: USB JP1 cable using RMIR on Mac? |
|
|
I dug up an old remote, my Chameleon URC 9960B01 the other day and was thinking it was kind of a cool remote and would like to use it as my main remote again for a while. I'm trying to make it work.
I can't seem to make it work on the Mac but that's probably because some driver here or there isn't installed.
Is it possible or do I need to go back to a Windows box or a virtual machine running Windows?
Thx _________________ this JP1 stuff is a sickness! |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3368
|
Posted: Sun Apr 09, 2017 11:33 pm Post subject: |
|
|
This stuff was mostly before I became interested in JP1, but I believe the three ways of communicating with an I2C EEPROM based remote are 1) bit banging through a parallel port, 2) with a transistor based adapter connected to a RS-232 serial port, and 3) the Delcom USB interface cable. I assume you have a Delcom interface cable made by Tommy Tyler.
I believe that Delcom only ever produced drivers for Windows based computers, so I don't think it is practical to use it with a Mac. However, many people use the adapter designed by Kevin Timmermann which is placed between the EEPROM remote and a standard USB JP1.2/1.3 cable. The adapter makes the EEPROM remote look like a JP1.2/1.3 remote to RMIR. At present I think only DIY Gadget sells these adapters. |
|
Back to top |
|
|
unclemiltie Expert
Joined: 21 Jan 2004 Posts: 1795 Location: Pittsburgh, PA |
Posted: Mon Apr 10, 2017 12:00 am Post subject: |
|
|
thanks, will go searching.
BTW, to the moderators. Some of the links on the hardware "start here" link to people who sell stuff are broken. _________________ this JP1 stuff is a sickness! |
|
Back to top |
|
|
HamburgerHelper1
Joined: 22 Feb 2014 Posts: 580
|
Posted: Mon Apr 10, 2017 6:20 am Post subject: Usb Rm Mac |
|
|
I will add my 2 cents worth
The DYI adapter from diygadget works perfectly.
I am Multibooting Xp, Win7, and 2 flavors of Linux and RM works with the adapter on all of them.
If you have troubles with Mac maybe you could try a live Linux cd
I also have my Linux on a bootable thumbdrive so where ever I am I can boot up my linux
and run RM as long as i have my wires with me
If you have troubles with Mac Let me know I can always send you a copy of my linux
with RM installed and ready to go |
|
Back to top |
|
|
unclemiltie Expert
Joined: 21 Jan 2004 Posts: 1795 Location: Pittsburgh, PA |
Posted: Mon Apr 10, 2017 8:52 pm Post subject: |
|
|
just bought one of the DIY devices, hopefully that'll get me going again.
I forgot how cool the Kameleon remotes were. Bu tI think I'm going to have to back-port the JP1.3 extender to the Kameleon since I'm not so used to it. (should not be too hard since the JP1.3 extender was a port of the 9960B01 extender in the first place!) _________________ this JP1 stuff is a sickness! |
|
Back to top |
|
|
unclemiltie Expert
Joined: 21 Jan 2004 Posts: 1795 Location: Pittsburgh, PA |
Posted: Tue Apr 25, 2017 1:32 pm Post subject: |
|
|
Well it appears that the remote, or at least the JP1 interface, is dead.
The remote seems to work but I can't find anything that will read the remote. I've successfully used my original USB JP1 cable and the DIY adapter to read other JP1 remotes so not sure where to go at this point.
(and yes, I did take it apart and re-solder the JP1 interface just in case there was a bad solder joint, that made no difference) _________________ this JP1 stuff is a sickness! |
|
Back to top |
|
|
|