Canton DM50 Soundbar

kabu · Post by **kabu** » Tue Feb 21, 2017 2:00 pm

1. Device: Canton DM50
2. Type of device: Soundbar
3. Year: 2016
4. JP1/UEI Remote model: URC-7140 R02
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? Yes, nothing found
8. Checked Pronto file section (at R/C)? Yes, nothing found
9. Partially working setup code? No
10. Learning remote question? Learning function doesn't recognise original remote
11. Have you tried the JP1 Lookup Tool? Yes, nothing found
12. If you have a Nevo (or similar) remote, have you tried ez-rc.com? n/a

Unfortunately, learning function doesn't work. I don't know why.

Manufacturers page says there is a working code for my URC-7140 R02, but they have to reprogram my remote.

Manufacturers page says also there is a working code AMP 3000 for URC-1240 and AUD 3000 for URC-7145. But I don't have one of those remotes.

3FG · Post by **3FG** » Tue Feb 21, 2017 2:47 pm

Try NEC1 0.251
Function OBC
Vol+ 10
Vol- 9
Mute 30
Power 29

kabu · Post by **kabu** » Wed Feb 22, 2017 4:44 pm

It's working.

Thank you very much.

Post by **The Robman** » Wed Feb 22, 2017 5:38 pm

kabu wrote:It's working.
Thank you very much.

Don't forgot to load your upgrade file to the file section.

Post by **The Robman** » Wed Feb 22, 2017 7:36 pm

and did you find the codes for the remaining 5 buttons on the remote?

input up
input down
sound (bass treble)
play mode (stereo surround)
bluetooth pairing

kabu · Post by **kabu** » Fri Feb 24, 2017 2:24 pm

I managed to find all buttons.

Code: Select all

Protocol: NEC1
Device/Subdevice: 0.251

OBC Function
============
  9 Vol-
 10 Vol+
 16 Input-
 17 Mode
 18 Sound
 24 Input+
 28 Bluetooth
 29 Power
 30 Mute

kabu · Post by **kabu** » Fri Feb 24, 2017 2:30 pm

I uploaded .rmdu file (Link). Hope that's correct and helpful for others.

Post by **The Robman** » Fri Feb 24, 2017 3:45 pm

Looks great, thanks for uploading.