|
JP1 Remotes
|
View previous topic :: View next topic |
Author |
Message |
Jeff2525
Joined: 01 Feb 2017 Posts: 26
|
Posted: Mon Feb 06, 2017 3:13 am Post subject: |
|
|
I am going to see if Logitech replies to my e-mail tomorrow, but if it doesn't I think I will have to buy the OARUSB04G. Its a nice remote and obviously wouldn't break the bank, but with everything added together, there are other things right now that I should put that money into.
I did think of something, if anyone is interested. There is a free Android app made by Xiaomi called "Mi Remote controller for TV/AC". I doubt that it has any abilities other than the 11 know commands, but maybe it does. I downloaded it but it won't even run because my phone doesn't have an IR blaster.
All in all, thanks for all the help so far! |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21254 Location: Chicago, IL |
Posted: Mon Feb 06, 2017 4:09 pm Post subject: |
|
|
I used MakeHex to generate a file of Pronto hex codes for all 256 button codes in device code 134
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=14381
here is the IRP file that I used Code: | Device=134
Function=0..255
Protocol=Xiaomi
Frequency=38300
Time Base=290
First Bit=MSB
Zero=2, -2
One=2, -3
Two=2, -4
Three=2, -5
Define C=(D:4:4)^(D:4)^(F:4:4)^(F:4)
Form=;1022u, -2,D:8,F:8,C:4,2,^29m |
_________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4505
|
Posted: Mon Feb 06, 2017 7:23 pm Post subject: |
|
|
I'll see if I can download that setup code from EZ-RC.
In any case, the slingbox got us a little off track. Can't Jeff just use this new setup code in his comcast remote and brute force 0-255 right now? |
|
Back to top |
|
|
Jeff2525
Joined: 01 Feb 2017 Posts: 26
|
Posted: Mon Feb 06, 2017 10:00 pm Post subject: |
|
|
mdavej wrote: | I'll see if I can download that setup code from EZ-RC.
In any case, the slingbox got us a little off track. Can't Jeff just use this new setup code in his comcast remote and brute force 0-255 right now? |
If it is possible without that cable mentioned earlier, than I can. I have a feeling I'd need that cable or a JP1 remote to do that. Hoping Im wrong though. |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3368
|
Posted: Mon Feb 06, 2017 10:08 pm Post subject: |
|
|
Jeff hasn't replied with the results of the 983 Signature blink back that I requested earlier, so we don't know which Comcast remote he has, but neither the JP1.3 nor the JP2 remote has the 023B executor built in, so he would need an interface cable either way. And, if his remote is a JP1.3, then we need an executor for the S3F80. If it is a JP2 remote, of course we already have the executor. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21254 Location: Chicago, IL |
Posted: Mon Feb 06, 2017 10:14 pm Post subject: |
|
|
Jeff2525 wrote: | mdavej wrote: | Can't Jeff just use this new setup code in his comcast remote and brute force 0-255 right now? |
If it is possible without that cable mentioned earlier, than I can. I have a feeling I'd need that cable or a JP1 remote to do that. Hoping I'm wrong though. | Yeah, Dave is forgetting that you don't have a JP1 cable. I take it from your post about contacting Logitech that you don't currently have a way to load Pronto hex into your Harmony, is that correct?
Chuliu, what JP1 remotes do you have? Maybe we can create a trial upgrade for you to test? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Last edited by The Robman on Tue Feb 07, 2017 10:27 am; edited 1 time in total |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4505
|
Posted: Mon Feb 06, 2017 10:29 pm Post subject: |
|
|
Found it on EZ-RC. No way to search a setup code. But entering make/model gave an exact match.
Code: | Upgrade protocol 0 = 02 3B (S3F80) Manual Settings: 02 3B (RM v2.04 build 10)
43 8D 02 8B 18 C0 00 01 2F 01 12 01 2F 01 A3 01
2F 02 36 01 2F 02 C7 02 02 01 12 3B 10 E4 1C 0B
E4 1D 0C 68 03 F0 C6 B4 03 C6 B4 04 C6 F0 C6 B4
04 C6 F6 FF 3E F6 FF 3E F6 01 0A 7B F8 AF E4 26
1C E4 27 1D F6 01 76 F6 FF 54 E4 26 1C E4 27 1D
F6 01 82 AF E4 0B 1C E4 0C 1D 1C 22 F6 01 4C 38
03 F6 FF 73 38 04 F6 FF 73 38 C6 F6 FF 77 1C 12
8D 01 4C 5C 04 8B 02 5C 02 90 C3 90 C3 08 C3 56
C0 03 86 04 C0 06 C1 12 F6 01 4C 5A EC AF
End |
RMDU: http://www.hifi-remote.com/forums/dload.php?action=file&file_id=14382 |
|
Back to top |
|
|
Jeff2525
Joined: 01 Feb 2017 Posts: 26
|
Posted: Mon Feb 06, 2017 10:40 pm Post subject: |
|
|
3FG wrote: | Jeff hasn't replied with the results of the 983 Signature blink back that I requested earlier, so we don't know which Comcast remote he has, but neither the JP1.3 nor the JP2 remote has the 023B executor built in, so he would need an interface cable either way. And, if his remote is a JP1.3, then we need an executor for the S3F80. If it is a JP2 remote, of course we already have the executor. |
The code is 3039. When I tapped number 5 (on step 8) it looked to light up based on my press, so I didn't count it towards the number provided.
Also, I did it 3 times to make sure I got the numbers right.
I don't have a way to load Pronto Hex code into my Harmony. Is that something that Logitech provides upon request, or is there freeware software that I download (provided I need it)? |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4505
|
Posted: Mon Feb 06, 2017 10:47 pm Post subject: |
|
|
You email it to datasupport@logitech.com along with your account name and ask that they add it to your account. Not sure how they respond to requests to add 256 unnamed commands though. There is no easy way to add it yourself. |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3368
|
Posted: Mon Feb 06, 2017 11:16 pm Post subject: |
|
|
Thanks Dave.
chiliu, here's a Xiaomi entry for protocols.ini Code: | [Xiaomi]
PID=02 3B
CmdParms=Dev:8, OBC:8
CmdTranslator=Translator(0,8,0) Translator(1,8,8)
DefaultCmd=00 00
Code.S3C80=43 8D 02 8B 18 C0 00 01 2F 01 12 01 2F 01 A3 01 2F 02 36 01 2F 02 C7 02 02 01 12 3B 10 E4 1C 0B E4 1D 0C 68 03 F0 C6 B4 03 C6 B4 04 C6 F0 C6 B4 04 C6 F6 FF 3E F6 FF 3E F6 01 0A 7B F8 AF E4 26 1C E4 27 1D F6 01 76 F6 FF 54 E4 26 1C E4 27 1D F6 01 82 AF E4 0B 1C E4 0C 1D 1C 22 F6 01 4C 38 03 F6 FF 73 38 04 F6 FF 73 38 C6 F6 FF 77 1C 12 8D 01 4C 5C 04 8B 02 5C 02 90 C3 90 C3 08 C3 56 C0 03 86 04 C0 06 C1 12 F6 01 4C 5A EC AF
Code.MAXQ610=33 69 02 96 00 05 17 00 16 00 17 00 21 00 17 00 2C 00 17 00 37 00 73 04 27 00 16 00 00 84 00 00 00 01 0C 07 D2 D0 D1 51 D3 D2 00 07 D2 D3 D2 63 54 03 01 70 71 32
Code.TI2541=01 07 01 21 02 96 00 05 17 00 16 00 17 00 21 00 17 00 2C 00 17 00 37 00 73 04 27 00 16 00 00 84 00 00 00 01 0C 07 04 02 03 51 05 04 00 07 04 05 04 63 54 03 01 70 71 32
| which you can paste in, or you can just download the new protocols.ini file. I assume that a Slingbox can handle an upgrade of this length.
BTW, note that the S3F80 executor is 142 bytes long, while the MAXQ610 one is 54 bytes. (Actually the official executor is 58 bytes, but they included a superfluous instruction.) The new executor language is much better for complicated executors. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4505
|
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3368
|
Posted: Tue Feb 07, 2017 1:00 am Post subject: |
|
|
I assigned the upgrade to the AUX button, and it shoots the correct signals. So yes, it looks OK. |
|
Back to top |
|
|
chuliu
Joined: 04 Dec 2010 Posts: 443 Location: Hong Kong |
Posted: Tue Feb 07, 2017 10:47 am Post subject: |
|
|
Thanks. I will download the profile.ini now and test it and let you know. |
|
Back to top |
|
|
chuliu
Joined: 04 Dec 2010 Posts: 443 Location: Hong Kong |
Posted: Tue Feb 07, 2017 11:02 am Post subject: |
|
|
I downloaded profile.ini and tried to create an upgrade from scratch.
However, if I change device to slingbox pl chip, it says that alternative id is required and will not allow me to save the file or export to binary.
If I change device to nevo c2, it seems normal. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21254 Location: Chicago, IL |
Posted: Tue Feb 07, 2017 11:24 am Post subject: |
|
|
chuliu wrote: | I downloaded profile.ini and tried to create an upgrade from scratch.
However, if I change device to slingbox pl chip, it says that alternative id is required and will not allow me to save the file or export to binary.
If I change device to nevo c2, it seems normal. |
No need to create an upgrade from scratch as Dave has already created one:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=14383
He did use the official $023B PID which is out of range for the Slingbox, so just enter something else, like 01 3B.
Here is one adjusted for the Slingbox
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=14385 _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|