View previous topic :: View next topic |
Author |
Message |
SBM911
Joined: 16 Nov 2003 Posts: 47
|
Posted: Sat Dec 17, 2016 4:35 pm Post subject: Help in creating a RM or KM file from Hex or CCF codes |
|
|
I am trying to use my RS 15-2017 to work with a newly acquired but old stock Aton DLA-4 remote controlled speaker switch. They have links to Pronto , RTI and Hex codes at http://www.atonhome.com/IRCodes.html
but it's beyond my skill set to use them to create a file that KM or RM can use.
Can someone help?
Thanks in advance |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Sat Dec 17, 2016 6:53 pm Post subject: |
|
|
Is this sufficient for you to make a RMDU file?
Code: | Local Room
Vol Up Elan Dev= 3 Sub= 252 OBC= 1
Vol Down Elan Dev= 3 Sub= 252 OBC= 2
Power On Elan Dev= 3 Sub= 252 OBC= 3
Power Off Elan Dev= 3 Sub= 252 OBC= 4
Set Override Elan Dev= 3 Sub= 252 OBC= 7
Mute Toggle Elan Dev= 3 Sub= 252 OBC= 10
Vol 3 Elan Dev= 3 Sub= 252 OBC= 19
Vol 6 Elan Dev= 3 Sub= 252 OBC= 22
Vol 9 Elan Dev= 3 Sub= 252 OBC= 25
Power Toggle Elan Dev= 3 Sub= 252 OBC= 5
Mute On Elan Dev= 3 Sub= 252 OBC= 8
Vol 1 Elan Dev= 3 Sub= 252 OBC= 17
Vol 4 Elan Dev= 3 Sub= 252 OBC= 20
Vol 7 Elan Dev= 3 Sub= 252 OBC= 23
Vol 10 Elan Dev= 3 Sub= 252 OBC= 26
Set Default Elan Dev= 3 Sub= 252 OBC= 6
Vol 11 Elan Dev= 3 Sub= 252 OBC= 27
Vol 8 Elan Dev= 3 Sub= 252 OBC= 24
Vol 5 Elan Dev= 3 Sub= 252 OBC= 21
Vol 2 Elan Dev= 3 Sub= 252 OBC= 18
Mute Off Elan Dev= 3 Sub= 252 OBC= 9 |
For Room 1, add 32 to each OBC; for Room 2 add 64; Room 3 add 96, etc through Room 6. For GLOBAL add 224.
If you need additional help, please tell us which signals you intend to send. |
|
Back to top |
|
|
Barf Expert
Joined: 24 Oct 2008 Posts: 1415 Location: Munich, Germany |
Posted: Sun Dec 18, 2016 1:29 pm Post subject: |
|
|
IrScrutinizer and this method generates an RMDU with a few key strokes, However, the remote you have (RS 15-2017) does not appear to support the Elan executor. |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Sun Dec 18, 2016 9:24 pm Post subject: |
|
|
I've added S3C80 executor code to protocols.ini and committed it to SourceForge, so the next release of RMIR will have an Elan entry for JP1, JP1.3, and JP1.4 remotes.
In the meantime add this line to the Elan entry in protocols.ini Code: | Code.S3C80=3B 8B 21 8B 16 8F 45 08 08 00 C9 01 7E 00 C9 00 B5 1B A0 02 5C 01 7E 08 FF 08 11 0C D0 F5 16 C0 0E F5 17 C0 0E F5 16 C0 0E F5 17 C0 E4 05 06 60 06 20 11 77 77 8D 01 46 |
|
|
Back to top |
|
|
SBM911
Joined: 16 Nov 2003 Posts: 47
|
Posted: Mon Jan 09, 2017 11:49 am Post subject: Downloaded RMIR 2.04 |
|
|
I downloaded ver 2.04 . Does this update have the ability to decode/incorporate one of the code sets here from Aton's site ( http://www.atonhome.com/IRCodes.html )
If so, what exactly do I do to add/or select the righ the protocol (assuming I need to do so) and the device codes.
I'm not familiar with the RMIR tool (formerly only an IR and KM user) so please help with some guidance.
Thanks |
|
Back to top |
|
|
Barf Expert
Joined: 24 Oct 2008 Posts: 1415 Location: Munich, Germany |
Posted: Mon Jan 09, 2017 2:03 pm Post subject: |
|
|
Well, everything is really present in the thread already. Just add 3FG's lines to the protocols.ini, and follow the instructions for turning the given data into rmdu using IrScrutinizer. Then import in RMIR and do the necessary changes.
A Japanese proverb says that if you give a man a fish, you will feed him for one day. If you teach him fishing, you will feed him for life.
Ok, here is the fish... created from the hex text file. Since there are several "Vol Up"s, these have been automatically "uniqueified". |
|
Back to top |
|
|
SBM911
Joined: 16 Nov 2003 Posts: 47
|
Posted: Mon Jan 09, 2017 9:14 pm Post subject: Thanks!! |
|
|
I really appreciate your creating the load file for me. I commit to learning to fish on my own by reading the RIMR Wiki and upgrading my old IR KM skills. I hadn't had any major changes to my 15-2117's in a few years and as a result got rusty. . |
|
Back to top |
|
|
SBM911
Joined: 16 Nov 2003 Posts: 47
|
Posted: Mon Jan 23, 2017 1:23 pm Post subject: Problem using elan protocol with a RMIR ver 15-2117 |
|
|
After Barf was good enough to create a device file for me for an Aton DLA-4 remote controlled speaker switcher from the CCF codes, and modified the latest RMIR version (2.04 Build 10), the upload from my RMIR with the new device included won't be accepted. I get a message that Elan protocols won't work with my remote.
I posted my RMIR to Diagnostics to see if it can be debugged/corrected to allow this upgrade.
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=14352
Thanks |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Mon Jan 23, 2017 11:25 pm Post subject: |
|
|
This thread is a continuation of another one.
It appears that your installation of RMIR still needs to have the protocols.ini file updated to include the S3C80 executor for the Elan protocol. In the previous thread, I recommended that you edit protocols.ini, but it may be easier to download it and put it in the same folder that holds your 2.04 RemoteMaster.jar file.
Download protocols.ini
With this newer version of protocols.ini, I was able to load your RMIR file. However, since it adds an executor to your remote, there is not enough room in the upgrade section of memory, so the upgrade spills over into the learned signal area. But I think you have an unused executor (017F) on the Protocols tab. I suspect you can remove that without affecting the operation of your remote and free up some memory. |
|
Back to top |
|
|
|