JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Remote 1056B01 create macro with delay

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Beginners
View previous topic :: View next topic  
Author Message
smbs



Joined: 27 Mar 2012
Posts: 58

                    
PostPosted: Tue Aug 16, 2016 8:39 am    Post subject: Remote 1056B01 create macro with delay Reply with quote

I want to create a macro which does the following
"enter, delay number of seconds, down, down , enter"
Do I have to install an extender? If so is Jp1.3 extender 3.03 the correct one to install?
Thanx
Back to top
View user's profile Send private message
mdavej
Expert


Joined: 08 Oct 2003
Posts: 4500

                    
PostPosted: Tue Aug 16, 2016 9:39 am    Post subject: Reply with quote

You can certainly add the extender if you wish. But there are other ways to get delays.

- Add dummy commands
- Use the Pause protocol

I would start with the latter and see if that does what you want. You would add a new device and choose the Pause protocol. Then make a few functions with different durations.

If you decide to use the extender, just go with the latest version. With the extender you enter the exact durations in RMIR rather than in the device upgrade. But the extender is much more complex, so you have a lot of other macros to write just to make the remote functional again. There is a learning curve.
Back to top
View user's profile Send private message
smbs



Joined: 27 Mar 2012
Posts: 58

                    
PostPosted: Tue Aug 16, 2016 10:12 am    Post subject: Reply with quote

Thanx for reply
I'll walk before I leap!
I'll try the Pause protocol as you suggested
Back to top
View user's profile Send private message
smbs



Joined: 27 Mar 2012
Posts: 58

                    
PostPosted: Tue Aug 16, 2016 11:28 am    Post subject: Reply with quote

I am obviously missing something Can U take a look?
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=14156
After adding pause protocol no keys whatsoever work!
Back to top
View user's profile Send private message
mdavej
Expert


Joined: 08 Oct 2003
Posts: 4500

                    
PostPosted: Tue Aug 16, 2016 11:52 am    Post subject: Reply with quote

Couple of issues.

First, a value of 160 is 10 seconds. You should have used 16 for 1 second.

Second, you assigned the Pause device to your CBL button. So now all the CBL device can control is your one pause function. Change your CBL code on the main tab back to the correct cable device setup code to regain control of your cable box.

After you fix that, make a new keymove for CBL phantom2 and pick the Device Upgrade for your Pause device and pick your phantom2 function.

May be easier to start with your old config, add the pause device, DO NOT assign it to a device button, then add the above keymove.

If you tell my your correct cable setup code, I can fix it for you.
Back to top
View user's profile Send private message
smbs



Joined: 27 Mar 2012
Posts: 58

                    
PostPosted: Tue Aug 16, 2016 12:38 pm    Post subject: Reply with quote

I need 10 sec delay - keys work but no delay--not quite sure what u mean "then add the above keymove" my box is a Mag254.
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=14158

Many thanx
Back to top
View user's profile Send private message
mdavej
Expert


Joined: 08 Oct 2003
Posts: 4500

                    
PostPosted: Tue Aug 16, 2016 1:08 pm    Post subject: Reply with quote

The above is the one I describe in the previous sentence.

I've replaced your file linked above with my version that includes the correct keymove.
Back to top
View user's profile Send private message
smbs



Joined: 27 Mar 2012
Posts: 58

                    
PostPosted: Tue Aug 16, 2016 1:46 pm    Post subject: Reply with quote

Many thanx
I now understand how to use the keymove and function
Really appreciate your help
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Beginners All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control