View previous topic :: View next topic |
Author |
Message |
The Boss
Joined: 27 May 2016 Posts: 11
|
Posted: Fri May 27, 2016 3:17 pm Post subject: Custom Remote Help |
|
|
I am creating a new remote for box that is not in the market. i am using slingbox 500 with HDMI connection to the box. I have the customer code 0x9A65 i converted that to 89,166 device and subdevice number. And i have Data Code's 0x15,0x58 where i converted to decimal 21,88 and like wise. Now i created a new remote Slingbox with UEI PL chip with settings as
Setup Code : 2010
Protocol : NEC1
Device : 89
Sub Device : 166
Then i added the decimal values in place of OBC in funtion list exported the binary file and placed in slingbox and its not working. what wrong am i doing.
Thanks |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Fri May 27, 2016 3:59 pm Post subject: |
|
|
I think we would need to see the complete set of codes that you have for this device in order to guess if you have converted the hex to decimal correctly.
When I try converting the data, I get 89 and 166 for the device codes and 168 and 26 for the OBCs _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Last edited by The Robman on Fri May 27, 2016 4:02 pm; edited 1 time in total |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Fri May 27, 2016 3:59 pm Post subject: |
|
|
Try sub device 83 |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Fri May 27, 2016 4:06 pm Post subject: |
|
|
I see what you did, you correctly treated the device code hex as LSB, but then you treated the OBC hex as MSB. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
The Boss
Joined: 27 May 2016 Posts: 11
|
Posted: Fri May 27, 2016 5:01 pm Post subject: |
|
|
It didn't work for me.
these are the details i have
Key Name Format Cust Code Data Code
STANDBY NEC 0x9A65 0x15
MUTE NEC 0x9A65 0x58
FR NEC 0x9A65 0x1C
STOP NEC 0x9A65 0x1E
PLAY NEC 0x9A65 0x1F
FF NEC 0x9A65 0x4B
INFOR NEC 0x9A65 0x01
HOME NEC 0x9A65 0x00
UP NEC 0x9A65 0x0B
LEFT NEC 0x9A65 0x0D
OK NEC 0x9A65 0x52
RIGHT NEC 0x9A65 0x0E
DOWN NEC 0x9A65 0x0C
RETURN NEC 0x9A65 0x13
EXIT NEC 0x9A65 0x14
VOL+ NEC 0x9A65 0x08
AD NEC 0x9A65 0x04
CH+ NEC 0x9A65 0x41
VOL- NEC 0x9A65 0x09
CC NEC 0x9A65 0x05
Ch- NEC 0x9A65 0x47
RED NEC 0x9A65 0x0F
GREEN NEC 0x9A65 0x18
YELLOW NEC 0x9A65 0x19
BLUE NEC 0x9A65 0x1A
1 NEC 0x9A65 0x5A
2 NEC 0x9A65 0x5E
3 NEC 0x9A65 0x4E
4 NEC 0x9A65 0x5D
5 NEC 0x9A65 0x51
6 NEC 0x9A65 0x49
7 NEC 0x9A65 0x59
8 NEC 0x9A65 0x55
9 NEC 0x9A65 0x4D
BKSPCE NEC 0x9A65 0x40
0 NEC 0x9A65 0x50
– NEC 0x9A65 0x0A
Any help would be appreciated. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
|
Back to top |
|
|
The Boss
Joined: 27 May 2016 Posts: 11
|
Posted: Sat May 28, 2016 10:12 am Post subject: |
|
|
I opened that in RM and exported as a bin file and placed in slingbox. no luck doesn't work. |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Sat May 28, 2016 11:00 am Post subject: |
|
|
Depending on how they reversed the bits (all 16, each byte piecewise, or if they swapped bytes) the reasonable dev.sub pairs are:
154.101 (as listed)
166.89 (16 bit reversal)
89.166 (reverse each byte)
101.154 (swapped bytes)
When testing pay particular attention to the Home function and the digit 1. These two OBCs have the same form if the bits are reversed. |
|
Back to top |
|
|
The Boss
Joined: 27 May 2016 Posts: 11
|
Posted: Tue May 31, 2016 12:57 pm Post subject: |
|
|
I see the box is not responding. i have reported to the h/w team. we will be getting new boxes by next two week's. i will update once i have got those. thanks though. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Tue May 31, 2016 2:05 pm Post subject: |
|
|
Does the box respond to the regular remote control? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
The Boss
Joined: 27 May 2016 Posts: 11
|
Posted: Tue May 31, 2016 4:04 pm Post subject: |
|
|
Yes it is responding but the codes i have got are from the updated version instead the remote that came along with the box. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Tue May 31, 2016 4:54 pm Post subject: |
|
|
Is it worth $17 to you to help get this programmed? (And you get a cool new remote in the process)
If so, buy one of these ...
http://www.ebay.com/itm/322044831124
It's the Nevo C2 remote, which is JP1 compatible and comes with it's own USB cable that can be used for JP1 purposes.
With this remote you can learn the buttons from the original remote and then post the results for us, and we can use them to make a new bin file. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
The Boss
Joined: 27 May 2016 Posts: 11
|
Posted: Fri Jun 03, 2016 8:15 pm Post subject: |
|
|
How does this works with Nova C2?? |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Fri Jun 03, 2016 10:52 pm Post subject: |
|
|
The Nevo is a learning remote that is JP1 compatible, which means you can use JP1 (specifically, a program called RMIR) to download the remote's memory and edit it and re-load it. So, it's actually a very powerful remote when combined with JP1.
But, all we need it for here is, if you learn the buttons from your current working OEM remote, you can download the memory (which will include the learned signals) using RMIR and then you can save the file. If you then post the file for us to look at, we can create a Slingbox file for you. At that point, you could put the Nevo in a drawer never to be seen again, if you like, as it would have served its purpose, or you could start to discover JP1 and program it to work your stuff. In which case, maybe we'll see you in some of the other forums here as you seek help with it. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
The Boss
Joined: 27 May 2016 Posts: 11
|
Posted: Mon Jun 06, 2016 9:26 am Post subject: |
|
|
Just placed the order for the remote, i need your guidance once i receive it. Thanks |
|
Back to top |
|
|
|