JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Virgin Media URC174001-00R00
Goto page Previous  1, 2, 3  Next
 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - New Remotes & RDFs
View previous topic :: View next topic  
Author Message
Knuckx



Joined: 15 Jul 2015
Posts: 66
Location: UK

                    
PostPosted: Thu May 05, 2016 3:49 am    Post subject: Reply with quote

From it's manual, the URC-6810 TV Zapper also seems to have no device selection, so would appear to be another JP1.4N remote. It even seems to share the strange "Star+Help changes the Navigation keys to TV" that the Virgin Media remote has; it's called AV Shift, and when AV is pressed it changes the Navigation keys over to TV until OK is pressed.

EDIT: The URC-6420 Simple 2 might be a JP1.4N remote as well; It has no device select keys, and setting a TV code only affects the TV Power, Volume, Mute and AV keys.

These JP1.4N remotes are almost like a remote that is always in Home Theater mode.
_________________
In Use: 3x URC7781 / 2x Nevo C2 / Harmony PS3 -|- Learner: Nevo C2
Back to top
View user's profile Send private message
mathdon
Expert


Joined: 22 Jul 2008
Posts: 4515
Location: Cambridge, UK

                    
PostPosted: Thu May 05, 2016 9:05 am    Post subject: Reply with quote

I have posted here an update for you to try. The zip includes a new RemoteMaster.jar (build 2) to replace the one in RMIR v2.04 build 1, and a revised RDF. I have also included your map and image files (and linked to them in the RDF) for anyone else who cares to download this trial package.

The RDF removes the Key Move, Macro and Learned Signals tabs as you don't think any of these are supported. It has the Volume Punchthrough on the General tab but keeps the 2nd and 3rd punchthrough bytes being set from the RDF. The RMIR revision is to allow this to be possible. I have left them as $10 $00. I don't think the 3rd byte is used, and as far as I can tell, you have not seen the 2nd byte being set by the remote to anything other than $10. If you want to experiment, you can change the byte 2 value in the RDF to try some other fixed value, or delete the last 3 bytes from each [DeviceButtons] entry (leaving just one on the right of each entry) so that RMIR won't change punchthrough bytes 2 and 3.

It would be nice to know what that byte 2 does, but I can't even guess at present. Its values in the Zapper+ are 01 or 00, changing depending on what devices have setup codes. It has 3 devices, TV, STB and Audio but like the VM remote there is no device selection, it operates with permanent punchthroughs and an AV button that behaves rather like the VM star key.

Do please report how you get on with these mods, whether anything is wrong or missing or any other comments you may have.
_________________
Graham
Back to top
View user's profile Send private message
Knuckx



Joined: 15 Jul 2015
Posts: 66
Location: UK

                    
PostPosted: Thu May 05, 2016 12:37 pm    Post subject: Reply with quote

Using the new build/RDF, I added a device with a protocol upgrade (my Pioneer amp, which uses Pioneer 4DEV) and it appears to work correctly.

Everything I can think of appears to work.

The second punchthrough byte doesn't seem to do anything, I've set it to multiple random values, including 0x81, 0x00 and 0xFF, and no change has occurred in the remotes behavior. It doesn't even reset when I add a TV device without one present. The only way I can cause the remote to set it back to 0x10 is to Init to $00 and let the remote rebuild it's config.

A suggestion for a feature: in the RDF, add a field that allows arbitary text, to be displayed on the general tab with the Edit Device button. This text could then be used for per remote documentation, such as explanations of the button -> device mapping of JP1.4N remotes, and listing the magic combinations for remotes without a dedicated button. This would be useful for this remote, since it has both of the above, as well as a couple of the other remotes I have which really require further documentation.

Thank you very much.
_________________
In Use: 3x URC7781 / 2x Nevo C2 / Harmony PS3 -|- Learner: Nevo C2
Back to top
View user's profile Send private message
Knuckx



Joined: 15 Jul 2015
Posts: 66
Location: UK

                    
PostPosted: Sat May 14, 2016 8:05 pm    Post subject: Reply with quote

So I picked up another identical looking Virgin Media remote (for almost nothing, from a car boot sale). This one does not work with the rdf we have, and is labelled as a URC174000-04R01 - I'm guessing an earlier remote.

Here is a Raw DL, taken with RMIR 2.04build2.
_________________
In Use: 3x URC7781 / 2x Nevo C2 / Harmony PS3 -|- Learner: Nevo C2
Back to top
View user's profile Send private message
3FG
Expert


Joined: 19 May 2009
Posts: 3365

                    
PostPosted: Mon May 16, 2016 12:34 am    Post subject: Reply with quote

This one is a more standard JP1.4 remote, although its TV capability is more limited than the original subject of this thread. A candidate RDF file.
Back to top
View user's profile Send private message
Knuckx



Joined: 15 Jul 2015
Posts: 66
Location: UK

                    
PostPosted: Mon May 16, 2016 12:17 pm    Post subject: Reply with quote

I just get 'error downloading from remote' with the RDF present.

Without the RDF, i get the 'No signature matching...' message.
_________________
In Use: 3x URC7781 / 2x Nevo C2 / Harmony PS3 -|- Learner: Nevo C2
Back to top
View user's profile Send private message
3FG
Expert


Joined: 19 May 2009
Posts: 3365

                    
PostPosted: Mon May 16, 2016 11:12 pm    Post subject: Reply with quote

It will help to see the contents of rmaster.err following the "error downloading from remote message". Also, please use the high level tab in JP2Sniffer to verify that it can download from the remote.

It isn't obvious to me how the RDF should describe punch throughs or the [Device Button section]. But I doubt incorrect entries would stop the remote from downloading.
Back to top
View user's profile Send private message
Knuckx



Joined: 15 Jul 2015
Posts: 66
Location: UK

                    
PostPosted: Tue May 17, 2016 5:43 pm    Post subject: Reply with quote

The appropriate bit of rmaster.err:
Code:
Starting normal download
Interface Name = NULL
Port Name = NULL
Testing interface: JP1.X Serial
Port Name = COM6
Opened on Port COM6
Opened interface type 1
Interface opened successfully
Base address = $5F00
Searching for RDF
Final signature sought = 328203
Remote identified as: Virgin Media URC174000-00R01
ERROR: ButtonMap 0 includes unknown keycode $83, Creating button!
Number of bytes read  = $2100
Ending normal download
Data parsing started
Download error: null
java.util.concurrent.ExecutionException: java.lang.NegativeArraySizeException
   at java.util.concurrent.FutureTask.report(Unknown Source)
   at java.util.concurrent.FutureTask.get(Unknown Source)
   at javax.swing.SwingWorker.get(Unknown Source)
   at com.hifiremote.jp1.RemoteMaster$DownloadTask.done(RemoteMaster.java:691)
   at javax.swing.SwingWorker$5.run(Unknown Source)
   at javax.swing.SwingWorker$DoSubmitAccumulativeRunnable.run(Unknown Source)
   at sun.swing.AccumulativeRunnable.run(Unknown Source)
   at javax.swing.SwingWorker$DoSubmitAccumulativeRunnable.actionPerformed(Unknown Source)
   at javax.swing.Timer.fireActionPerformed(Unknown Source)
   at javax.swing.Timer$DoPostEvent.run(Unknown Source)
   at java.awt.event.InvocationEvent.dispatch(Unknown Source)
   at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
   at java.awt.EventQueue.access$200(Unknown Source)
   at java.awt.EventQueue$3.run(Unknown Source)
   at java.awt.EventQueue$3.run(Unknown Source)
   at java.security.AccessController.doPrivileged(Native Method)
   at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
   at java.awt.EventQueue.dispatchEvent(Unknown Source)
   at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
   at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
   at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
   at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
   at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
   at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: java.lang.NegativeArraySizeException
   at com.hifiremote.jp1.Hex.<init>(Hex.java:68)
   at com.hifiremote.jp1.RemoteConfiguration.loadSegments(RemoteConfiguration.java:1920)
   at com.hifiremote.jp1.RemoteConfiguration.importIR(RemoteConfiguration.java:3802)
   at com.hifiremote.jp1.RemoteConfiguration.parseData(RemoteConfiguration.java:4394)
   at com.hifiremote.jp1.RemoteMaster$DownloadTask.doInBackground(RemoteMaster.java:675)
   at com.hifiremote.jp1.RemoteMaster$DownloadTask.doInBackground(RemoteMaster.java:1)
   at javax.swing.SwingWorker$1.call(Unknown Source)
   at java.util.concurrent.FutureTask.run(Unknown Source)
   at javax.swing.SwingWorker.run(Unknown Source)
   at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)
   at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
   at java.lang.Thread.run(Unknown Source)
RemoteMaster.windowClosing() entered


JP2Sniffer reads 4 segments - types 13/C8/00/00 - then says read operation timed out.
_________________
In Use: 3x URC7781 / 2x Nevo C2 / Harmony PS3 -|- Learner: Nevo C2
Back to top
View user's profile Send private message
mathdon
Expert


Joined: 22 Jul 2008
Posts: 4515
Location: Cambridge, UK

                    
PostPosted: Wed May 18, 2016 5:24 pm    Post subject: Reply with quote

Edit the RDF with a text editor and in the line below [Checksums], change the first character from * to ^. The initial * is needed for JP1.4N remotes but for JP1.4 remotes it should be ^.
_________________
Graham
Back to top
View user's profile Send private message
Knuckx



Joined: 15 Jul 2015
Posts: 66
Location: UK

                    
PostPosted: Wed May 18, 2016 6:15 pm    Post subject: Reply with quote

Thanks; I can now download without errors.

This remote does not like Initialize to $00 (It appears dead afterwards), but Initialize to $FF works.

The Image/Map for the JP1.4N Virgin Media remote works with this RDF.

The bad news is that the Buttons and ButtonMaps seem to be completely wrong. Most buttons don't do anything. The few that do are in the wrong place (if you assign to Vol+ in RMIR, it ends up on Stop on the remote).
_________________
In Use: 3x URC7781 / 2x Nevo C2 / Harmony PS3 -|- Learner: Nevo C2
Back to top
View user's profile Send private message
mathdon
Expert


Joined: 22 Jul 2008
Posts: 4515
Location: Cambridge, UK

                    
PostPosted: Thu May 19, 2016 6:40 am    Post subject: Reply with quote

Knuckx wrote:
The bad news is that the Buttons and ButtonMaps seem to be completely wrong. Most buttons don't do anything. The few that do are in the wrong place (if you assign to Vol+ in RMIR, it ends up on Stop on the remote).

Can you give a more complete list of the buttons that work, giving (as in your example) the RMIR assignment and where it ends up on the remote? My guess is that the hardware of your two VM remotes is identical, so that the difference in button codes is software-related. With a few more examples we may be able to make a guess at how the key mapping has been changed.
_________________
Graham
Back to top
View user's profile Send private message
Knuckx



Joined: 15 Jul 2015
Posts: 66
Location: UK

                    
PostPosted: Thu May 19, 2016 2:14 pm    Post subject: Reply with quote

In STB mode, STB Device type, all buttons assigned apart from *.

Depending on the number of buttons assigned, the place they appear seems to change; as Vol+ = Stop with less buttons assigned...

RMIR Button Name = Remote Button
Power = Play
button83 = FastFwd
Home = SkipBack
Mute = Down
Vol+ = OK
Vol- = Right
Help = Record
Rewind = Rewind
0 = Red
1 = Green
2 = Yellow
3 = Blue
4 = Guide
5 = Help
6 = Fav
7 = Info
8 = Up
9 = Left

That seems to be most of them; I've probably missed some.
_________________
In Use: 3x URC7781 / 2x Nevo C2 / Harmony PS3 -|- Learner: Nevo C2
Back to top
View user's profile Send private message
3FG
Expert


Joined: 19 May 2009
Posts: 3365

                    
PostPosted: Fri May 20, 2016 12:13 am    Post subject: Reply with quote

This remote doesn't use a digit table. Lots of remotes don't use the digit table, but still follow the standard format for upgrades, and place 00 at the byte location where the digit table number would be placed. The URC174000-00R01 is the only JP1.4/2/3 remote that I'm aware of that doesn't respect this aspect of the standard upgrade format: it simply omits the byte which would contain the digit table number.

Please test this assertion by loading an upgrade onto STB using RMIR. Then use the High Level tab of JP2Sniffer to download from the remote, edit the Type 10 segment as described below, and upload to the remote.

For example a standard upgrade using PID 005A (NEC1) device 243.253, setup code 1234 and only button 0 assigned would start like this:
00 00 00 00 00 04 D2 01 03 00 5A 00 81 20 30 40 3E 00 ........
The PID is in blue, and RMIR will have placed a 00 byte (red) just after the PID. Delete the 00 byte in red. Of course you should assign a lot of buttons to see the behavior; I only assigned one in order to generate the simplest upgrade.
Back to top
View user's profile Send private message
mathdon
Expert


Joined: 22 Jul 2008
Posts: 4515
Location: Cambridge, UK

                    
PostPosted: Fri May 20, 2016 3:58 am    Post subject: Reply with quote

RMIR can already handle remotes that omit the digit map byte. To do so, you need to add the line
Code:
OmitDigitMapByte=Y

into the [General] section of the RDF. It doesn't matter where in that section it occurs. You can add it at the end or somewhere in the middle. Please try it and let us know if it sorts the problem.

@3FG: I think this RDF item dates from very early in JP1, so I presume that some very old remotes also had this behaviour.
_________________
Graham
Back to top
View user's profile Send private message
Knuckx



Joined: 15 Jul 2015
Posts: 66
Location: UK

                    
PostPosted: Sat May 21, 2016 6:02 am    Post subject: Reply with quote

Yep, that RDF change fixed it. Still need to check keymoves/macros/learning/protocol upgrade/9xx codes, but all the keys match now. I will upload my copy of the RDF when I have finished messing with it.

Thanks to both of you for RMIR and all the help Smile
_________________
In Use: 3x URC7781 / 2x Nevo C2 / Harmony PS3 -|- Learner: Nevo C2
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - New Remotes & RDFs All times are GMT - 5 Hours
Goto page Previous  1, 2, 3  Next
Page 2 of 3

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control