JP1 Remotes

[mdavej]

It most likely isn't bricked. Install fresh batteries and follow procedure 10 below to get out of update mode. If you're running Win 8, 8.1 or 10, you must also make a change to the registry.

http://www.hifi-remote.com/forums/viewtopic.php?p=27215#27215

Registry change:
http://www.hifi-remote.com/wiki/index.php?title=Getting_started_with_Xsight_and_Nevo#Win_8.1.2F10_Requirements

[turbogt16v]

ok my bad,i changed the battery and it worked for the update part
what is my next move
i see that mdavej add service codes
how do i upload it
,and where to find these codes on my remote

[mdavej]

- Install Remote Master
- Download from remote
- Go to Devices tab, New, Open (browse to my posted file), OK
- Upload to remote

When you select the device on the remote, you should see the service functions on the screen. Press the adjacent button to send the command.

I made some guesses when making the file. So if the commands don't work, I can try something else.

[turbogt16v]

sory where to download Remote Master

[mdavej]

https://sourceforge.net/projects/controlremote/files/

See the included Readme for installation instructions.

[turbogt16v]

ok i think i got it will try

thank you all

[turbogt16v]

your codes for projector work good,
i cant change the country but the codes work,just for future reference.

[The Robman]

[turbogt16v]

well the in-start menu differs from model to model,
and in my case the country is seen but can't be selected.

[The Robman]

So the JP1 upgrade let you get into the in-start menu but it didn't offer all the choices that you were hoping for? Have you researched your model to see if there are other options?
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!