View previous topic :: View next topic |
Author |
Message |
turbogt16v
Joined: 23 Nov 2015 Posts: 20 Location: Croatia |
Posted: Wed Apr 20, 2016 1:57 am Post subject: cheap urc for lg service menu |
|
|
hy
i need help on buying cheap urc to open service menu on my lg projector.
can someone help me.
do i need programmable one,do i need cable then ,and is it the cheapest
thank you |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Wed Apr 20, 2016 9:39 am Post subject: |
|
|
Can you post a link to the service menu codes you've found? |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Wed Apr 20, 2016 10:22 am Post subject: |
|
|
The hack info is here:
http://www.hifi-remote.com/forums/viewtopic.php?t=12079
and the codes in question are these:
Nec1 4, OBC 255 EZ Adjust (EFC 018)
Nec1 4, OBC 251 In-Start (EFC 019)
Nec1 4, OBC 250 In-End (EFC 015) _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
turbogt16v
Joined: 23 Nov 2015 Posts: 20 Location: Croatia |
Posted: Thu Apr 21, 2016 12:20 am Post subject: |
|
|
i just ordered,hope it comes with that cable,
thank you |
|
Back to top |
|
|
pH7_jp1
Joined: 14 Sep 2003 Posts: 480 Location: Sterling Heights, MI |
Posted: Thu Apr 21, 2016 6:48 am Post subject: |
|
|
Quote: | ...hope it comes with that cable,... | It should. (Mine did) Even if not, the cable is just a standard USB to mini-USB that I have seen for as little as $3. |
|
Back to top |
|
|
turbogt16v
Joined: 23 Nov 2015 Posts: 20 Location: Croatia |
Posted: Fri Apr 29, 2016 2:55 am Post subject: |
|
|
could someone write the procedure for entering code in this remote,
like for low iq instructions |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Fri Apr 29, 2016 7:52 am Post subject: |
|
|
First things first, you should connect your remote to the official web site http://www.ez-rc.com as that will update the firmware. Then, after that, we might be able to put a file together for you to load into the remote. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Fri Apr 29, 2016 10:22 am Post subject: |
|
|
Dave, I get the impression that Turbo will need an RMIR file for his Nevo C2, otherwise he'll probably need detailed instructions on how to add upgrades, etc. I think his venture into JP1 is strictly limited to getting into the EZ menu on his LG tv. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Fri Apr 29, 2016 10:27 am Post subject: |
|
|
I can throw together an RMIR file too. Do you think my upgrade is correct with regard to the blank subdevice? |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Fri Apr 29, 2016 3:42 pm Post subject: |
|
|
mdavej wrote: | I can throw together an RMIR file too. Do you think my upgrade is correct with regard to the blank subdevice? |
I would have to go back and re-read the hack instructions and then take a closer look at the files that you created. I thought it was just a simple NEC1 dev 4 upgrade with a few specific EFC codes. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Fri Apr 29, 2016 10:00 pm Post subject: |
|
|
Yes, all I did was take an existing LG projector upgrade which used all NEC1 4.15 codes and added the few new service commands in the linked thread using just NEC1 4 (blank subdevice). I figured he'd want to fully control the projector. My confusion came from the fact that all the other commands are 4.15. |
|
Back to top |
|
|
turbogt16v
Joined: 23 Nov 2015 Posts: 20 Location: Croatia |
Posted: Wed May 04, 2016 2:11 am Post subject: |
|
|
yes i need the code just to enter sevice menu for 1 time ,nothing more,
i need to change the country of origin to korea so i can play dts.
i tried to update but it fails on about 80 percent i tired again and same,
and now it wont start at all ,is this now bricked remote,any ideas |
|
Back to top |
|
|
turbogt16v
Joined: 23 Nov 2015 Posts: 20 Location: Croatia |
|
Back to top |
|
|
|