If you have learned signals that don't get decoded when you look at them in IR.exe, post your file to the Diagnosis Area then post your question here (including a link to the file).
Moderator: Moderators
Carl
Posts: 159 Joined: Thu Jan 15, 2009 7:30 pmLocation: Quebec city, Canada
Contact:
Post
by Carl Tue Feb 23, 2016 6:51 am
Hi,
Epson seems to have change their IR protocol for the Pro series projector.
I'm using IRwidjet to decode the signal but no luck so far. I get a waveform from irscope but DecodeIR.dll (last version) do not recognize the protocol.
I have also tried IRscrutinizer and here is what I get for the menu button:
Code: Select all
0000 006C 002D 0000 0058 0017 0016 0016 002C 0016 0016 0016 0016 002C 0016 0016 002C 0016 002C 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0B6D 0058 0016 0016 0016 002C 0016 0016 0016 0016 002C 0016 0016 002C 0016 002C 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0B6D 0058 0016 0016 0017 002C 0016 0016 0016 0016 002C 0016 0016 002C 0016 002C 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0017 0016 323D
Can someone help me with this?
The Robman
Site Owner
Posts: 21886 Joined: Fri Aug 01, 2003 9:37 amLocation: Chicago, IL
Contact:
Post
by The Robman Tue Feb 23, 2016 7:45 am
I haven't seen this protocol before. It appears to be bi-phase with a double wide burst in the middle.
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Carl
Posts: 159 Joined: Thu Jan 15, 2009 7:30 pmLocation: Quebec city, Canada
Contact:
Post
by Carl Tue Feb 23, 2016 9:09 am
I've been controlling all kind of Epson projectors for 10 years, I was surprised to see that my remote did not work with this one.
The Robman
Site Owner
Posts: 21886 Joined: Fri Aug 01, 2003 9:37 amLocation: Chicago, IL
Contact:
Post
by The Robman Tue Feb 23, 2016 9:11 am
If you capture all the buttons from the remote, I'll build you an upgrade. Well, if your remote uses a S3F8 chip, I can build an executor for you. If you have one of the other chips, somebody else will have to port my work to that processor.
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Carl
Posts: 159 Joined: Thu Jan 15, 2009 7:30 pmLocation: Quebec city, Canada
Contact:
Post
by Carl Tue Feb 23, 2016 10:02 am
Cool! What do you need from me so it's easier for you to make the upgrade?
I have both irscope and irscrutinize.
Would the raw capture from irscrutinize will work for you?
Like these 2 buttons:
Code: Select all
7 10:59:18 f=38552 +2283 -596 +571 -569 +1141 -570 +571 -569 +571 -569 +571 -569 +1141 -1145 +571 -569 +571 -569 +1141 -570 +571 -569 +571 -569 +571 -569 +571 -569 +571 -31609 +2283 -596 +571 -596 +1141 -570 +571 -569 +571 -596 +571 -569 +1141 -1145 +571 -569 +571 -569 +1141 -570 +571 -569 +571 -569 +571 -569 +571 -569 +571 -31609 +2283 -570 +571 -569 +1141 -596 +571 -569 +571 -569 +571 -569 +1141 -1145 +571 -569 +571 -569 +1141 -570 +571 -569 +571 -569 +571 -569 +571 -569 +571 -317374 Up false 38552
8 10:59:19 f=38519 +2285 -596 +571 -570 +1142 -570 +571 -570 +571 -570 +571 -570 +1142 -570 +571 -570 +571 -570 +571 -570 +571 -1138 +571 -570 +571 -570 +1142 -570 +571 -31609 +2285 -570 +571 -570 +1142 -570 +571 -570 +571 -570 +571 -596 +1142 -570 +571 -570 +571 -570 +571 -570 +571 -1138 +571 -570 +571 -570 +1142 -570 +571 -31609 +2285 -570 +571 -570 +1142 -596 +571 -570 +571 -570 +571 -570 +1142 -596 +571 -570 +571 -570 +571 -570 +571 -1138 +571 -570 +571 -570 +1142 -570 +571 -330974 down false 38519
Carl
Posts: 159 Joined: Thu Jan 15, 2009 7:30 pmLocation: Quebec city, Canada
Contact:
Post
by Carl Tue Feb 23, 2016 10:04 am
My remote is a URC 8820 Extender A (HCS08) JP1.2
The Robman
Site Owner
Posts: 21886 Joined: Fri Aug 01, 2003 9:37 amLocation: Chicago, IL
Contact:
Post
by The Robman Tue Feb 23, 2016 10:51 am
What I really need is an IR or RMIR file. The 8820 is a learning remote, so capture the signals using that. If you really want to use IRScope to capture them, do that, but then cut & paste the learns into IR or RMIR.
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Carl
Posts: 159 Joined: Thu Jan 15, 2009 7:30 pmLocation: Quebec city, Canada
Contact:
Post
by Carl Tue Feb 23, 2016 11:13 am
OK! I'm on it.
The Robman
Site Owner
Posts: 21886 Joined: Fri Aug 01, 2003 9:37 amLocation: Chicago, IL
Contact:
Post
by The Robman Tue Feb 23, 2016 2:42 pm
A-ha, the complete set is much more revealing. This isn't bi-phase at all, it's a quad, where:
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Carl
Posts: 159 Joined: Thu Jan 15, 2009 7:30 pmLocation: Quebec city, Canada
Contact:
Post
by Carl Tue Feb 23, 2016 3:50 pm
What should I look For? I know that the LAN button is not in any of them...
mdavej
Expert
Posts: 4631 Joined: Wed Oct 08, 2003 7:08 am
Post
by mdavej Tue Feb 23, 2016 3:57 pm
If any of them works at all, then we have a protocol match that might save someone the effort of writing the code. So I'd try each and just a few commands like Power. The best candidates are probably the ones that have a Manual protocol. But most of those only have code for the MAXQ, so you can't test them. You only have old HSC08 remotes like the 8910, right?
Carl
Posts: 159 Joined: Thu Jan 15, 2009 7:30 pmLocation: Quebec city, Canada
Contact:
Post
by Carl Tue Feb 23, 2016 4:36 pm
I have some Atlas 1056 JP2... I will try the codes.