Golden Interstar xpeed LX2 receiver [solved]

Post by **The Robman** » Fri Feb 19, 2016 11:29 am

The reason I asked if you have an OEM remote is because your previous post made it sound like maybe your STB wouldn't respond to any remote.

I don't quite follow the Comaq stuff, but regardless, it sounds like you have determined that your STB responds to NEC1 device code 0. Don't worry about the fixed data because, when the first byte is "00", the 3rd byte is meaningless.

What I would recommend is that you create several device upgrades, all using NEC1 dev 0, where the first upgrade has as many OBCs, from 0 to whatever that you can find buttons to put them on, and the next have the rest. For example, if your Dream remote has 40 buttons, it would look something like this...

upgrade 1: OBCs 0-39
upgrade 2: OBCs 40-79
upgrade 3: OBCs 80-119
upgrade 4: OBCs 120-159
upgrade 5: OBCs 160-199
upgrade 6: OBCs 200-239
upgrade 7: OBCs 240-255

Then for the first pass, assign the first 3 upgrades to the 3 device buttons and test each button to see what they really do (if anything). For the 2nd pass, assign the next 3 upgrades, etc. Keeping in mind that some buttons will only get a response when the STB is in the right mode, so you may need to do it all again once you have found the main buttons.

LopoTRI · Post by **LopoTRI** » Fri Feb 19, 2016 11:45 am

Hehe, of course, that i made and i just read now your answer...
I made several codes, 10 at every code and put that only in numbers 0-9, so i can know what number i am if my peed response to any key...

I just wanted to write it here....
I am at obc 90, and i need 2 buttons....

Post by **The Robman** » Fri Feb 19, 2016 11:53 am

What are the OBCs that you've found so far, and what are the 2 buttons that are still missing?

LopoTRI · Post by **LopoTRI** » Fri Feb 19, 2016 9:14 pm

Yes, i´m ready with it...

Thanx anyway for your help robman, i managed it, sorry for late answer, i worked on my telefunken smart tv too for my dream ir.
Cause on original dream ir my tv response only on "power", mute" and some buttons. But i needed the "ok" and other buttons for smart tv....

Now all works perfect...

To say, for xpeed lx i found all obc´s / buttons from the original remote and i have 8 obc´s that i don´t know for what they are. i think i tried everything, but on the 8 that i named "unknown 1, ....8" only the icon "not yet / no function" appears on tv.

So can i upload my upgrades for the forum to the file section under "Device upgrades" and edit the first post with link ?? or must an admin look first inside the upgrade to give the ok??

P.S: i said, i have managed my tv too, and i made a seperate upgrade for the forum, if i can upload it too.
It´s a Telefunken 49" FullHD LED TV Model: D49F283N3C

P.P.S: At last to say, I had long time a Dream, and now i changed to xpeed lx, but i was frustrated with the orig remote, too small, no good handling...
Then i came to the idea with the dream ir, but i don´t knew that the jp1 exist. I wrote to the support of Golden Interstar, if they can give the code for universal remote. They said no, uni-remotes don´t work with it, you can buy another from our site...

And now

Post by **The Robman** » Sat Feb 20, 2016 10:05 am

yes absolutely, please load your upgrades in the relevant folders in the device section, no approval needed, and then post links back here so we can look at them.

Well done.

LopoTRI · Post by **LopoTRI** » Sat Feb 20, 2016 11:41 am

Ok, link added in first post too...
https://www.hifi-remote.com/forums/dload ... e_id=13935

And here my Telefunken TV...
https://www.hifi-remote.com/forums/dload ... e_id=13936

Post by **The Robman** » Sat Feb 20, 2016 1:02 pm

Unknown1 and Rewind have the same code, and you have "pip on/off" with no code.

LopoTRI · Post by **LopoTRI** » Sat Feb 20, 2016 2:13 pm

Ok this with rewind and unknown1 i don´t saw it sorry.
And with pip button i can´t manage it, cause xpeed lx1 / lx2 can´t pip because the cpu it´s not compatible.
Only xpeed lx3 can this, and has the same ir...
I can´t pip with my box, and i have 7 unknown buttons, i don´t know what obc is for pip, cause on all obc´s comes the "not available" icon....

So can i edit the upload-post and upload the corrected image???? cause i don´t found a delete option....

Post by **The Robman** » Sat Feb 20, 2016 2:16 pm

The delete button is the "X" next to the edit button, but don't use that, to replace the file, click "edit" and then on the next screen, click "chose file" and select the updated file. That way the URL doesn't change.

LopoTRI · Post by **LopoTRI** » Sat Feb 20, 2016 2:27 pm

ok updated file and text....