View previous topic :: View next topic |
Author |
Message |
tornadotj
Joined: 03 Feb 2016 Posts: 6
|
Posted: Fri Feb 12, 2016 3:34 pm Post subject: Nevo C2 Newbie - stuck |
|
|
OK, so I got my C2, I've installed RemoteMaster, and Conduit. I fired up RM, and it doesn't look anything like the tutorial, so I'm completely lost regarding what to do at this point. Is there a new tutorial or something I can use to get the ball rolling? I only need to add a couple of devices, nothing earth-shattering. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
Posted: Fri Feb 12, 2016 4:21 pm Post subject: |
|
|
No updated tutorials unfortunately. This youtube video might help a little:
http://www.youtube.com/watch?v=mB6mAHqeW3I
The biggest difference is the new Activities tab. Basic principles still apply. Find device upgrade in our file section, go to devices tab, New, Open (your upgrade file), arrange buttons as desired on the Layout tab (drag and drop), OK, Save, Download to remote.
If you can't figure it out, just use EZ-RC for now, or do the initial device setup on the remote itself. You have to use EZ-RC for the initial firmware update anyway.
FYI, RM doesn't use the Conduit. |
|
Back to top |
|
|
tornadotj
Joined: 03 Feb 2016 Posts: 6
|
Posted: Fri Feb 12, 2016 4:25 pm Post subject: |
|
|
EZ-RC I guess is the website? I tell it to connect to my remote, and I just get streaming dots ... for minutes on end. Nothing ever happens.
In RM, I don't have an OK button.
Remote does show the USB symbol and says "USB Connected".
So, although I seem to be making a little progress, I'm still stuck.
http://www.hifi-remote.com/temp/RM_zpsk8pzkgih.jpg |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
|
Back to top |
|
|
tornadotj
Joined: 03 Feb 2016 Posts: 6
|
Posted: Fri Feb 12, 2016 4:37 pm Post subject: |
|
|
I am in Windows 10. I have tried Chrome and Edge. If necessary, I could plug this thing into the HTPC which is on W7, but I try to limit what I put on that box unless it's necessary for this to work for me.
OK, that thing you just sent looks completely different than what I see. What is going on here? I'm confused!!!
Still no OK though. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
Posted: Fri Feb 12, 2016 4:46 pm Post subject: |
|
|
Sounds like you haven't read the wiki:
http://www.hifi-remote.com/wiki/index.php?title=Getting_started_with_Xsight_and_Nevo
Quote: | EZ-RC only works in IE, not in Edge, Chrome, Firefox or any other browser. In Edge, you can re-open the page in IE mode. |
Then you must read the Win 10 requirements and perform the registry changes at least twice, before the firmware update and again during.
If you don't want to bother with all of that, use W7 for now.
I don't know what image you're talking about. But if you double-click my file, Devices, New, there is an OK button at the bottom right, I swear. RM is only the device editor. If you open it from the Devices tab in RMIR, it has OK. If you open it stand-alone, it doesn't. You'll ultimately be working from a file like the one I gave you. But we have to get through the firmware update first.
Last edited by mdavej on Fri Feb 12, 2016 4:49 pm; edited 1 time in total |
|
Back to top |
|
|
tornadotj
Joined: 03 Feb 2016 Posts: 6
|
Posted: Fri Feb 12, 2016 4:48 pm Post subject: |
|
|
OK, I'll go try W7.
I put a picture link in one of the above messages, strange you aren't seeing it.
I read the Wiki, did the registry change, but since I can't do the firmware update I don't have the registry entry without the .
So, let's stop here and I'll go try all this in W7. At least I still have one around. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
Posted: Fri Feb 12, 2016 4:54 pm Post subject: |
|
|
I'm behind a firewall at the moment and all pictures are blocked. That's probably it.
If you use Win 7 and IE, it should work without issue.
Unfortunately, I'm going to be away the rest of tonight and tomorrow morning. Hopefully someone else can pick up and get you over the hump. I'll check back in tomorrow afternoon. |
|
Back to top |
|
|
tornadotj
Joined: 03 Feb 2016 Posts: 6
|
Posted: Fri Feb 12, 2016 4:57 pm Post subject: |
|
|
No rush. I've had it for a week and just now getting around to playing with it. As you know from the AVS forum, I like to tinker. I do eventually want to use this remote, and if I get good at it I'll even get one for my dad and pre-program it for him. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
Posted: Fri Feb 12, 2016 4:59 pm Post subject: |
|
|
I think you'll really like the remote and the software once you get the hang of it.
Signing out for now... |
|
Back to top |
|
|
tornadotj
Joined: 03 Feb 2016 Posts: 6
|
Posted: Fri Feb 12, 2016 6:32 pm Post subject: |
|
|
So, I was using the wrong application!
I am very close to being done. I think the one thing I'm missing here is I cannot figure out how to end an activity. On the Harmony, you just hit the Power button and that's it. On the C2, it's not ending the activity. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21244 Location: Chicago, IL |
Posted: Fri Feb 12, 2016 7:52 pm Post subject: |
|
|
mdavej wrote: | I'm behind a firewall at the moment and all pictures are blocked. That's probably it. |
I have the same problem at work too. I have moved the pic to my server, so it should be visible now. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
pH7_jp1
Joined: 14 Sep 2003 Posts: 480 Location: Sterling Heights, MI |
Posted: Sat Feb 13, 2016 3:05 pm Post subject: |
|
|
Quote: | I am very close to being done. I think the one thing I'm missing here is I cannot figure out how to end an activity. On the Harmony, you just hit the Power button and that's it. On the C2, it's not ending the activity. | I'm not quite sure what you mean by "end an activity". In the Nevo the default sort of setup done by EZ_RC creates an activity named "Goodnight". I would call it "All Off". So when you are done with one activity you are doing another activity or turning everything off, which is treated as another activity in the Nevo. |
|
Back to top |
|
|
chuliu
Joined: 04 Dec 2010 Posts: 443 Location: Hong Kong |
Posted: Sat Apr 09, 2016 8:31 am Post subject: |
|
|
Hello, I want to ask how I can check if my nevo c2 has the latest firmware.
My win 10 registry key didn't change, still remaining XSIGHT.
Thanks. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
|
Back to top |
|
|
|