TVIP box

alanrichey · Post by **alanrichey** » Tue Dec 15, 2015 9:59 am

Over at Place Shifting a user has requested a BIN file for a TVIP ITV400. I cannot track it down, but he has provided the following codes (apparently it is a NEC device). Can we build a BIN file ?

Power = 0xe31cfe01,
Home = 0xf708fe01,

Red = 0xa956fe01,
Green = 0xa857fe01,
Yellow = 0xe01ffe01,
Blue = 0xa45bfe01,

Setup = 0xaa55fe01,
SysInfo = 0xa15efe01,
Internet = 0xae51fe01,
Zoom = 0xa659fe01,

PreviousChapter = 0xa55afe01,
Subtitle = 0xad52fe01,
Record = 0xa25dfe01,
NextChapter = 0xa35cfe01,

FastRewind = 0xfe01fe01,
PlayPause = 0xa05ffe01,
Stop = 0xe619fe01,
FastForward = 0xa758fe01,

Menu = 0xe718fe01,
Back = 0xe817fe01,

Up = 0xe51afe01,
Left = 0xb847fe01,
Ok = 0xf906fe01,
Right = 0xf807fe01,
Down = 0xb748fe01,

Info = 0xb649fe01,
EPG = 0xf50afe01,

VolumeUp = 0xb44bfe01,
VolumeDown = 0xb04ffe01,
Mouse = 0xfc03fe01,
Mute = 0xbd42fe01,
ChPageUp = 0xf609fe01,
ChPageDown = 0xfa05fe01,

1 = 0xab54fe01,
2 = 0xe916fe01,
3 = 0xea15fe01,
4 = 0xaf50fe01,
5 = 0xed12fe01,
6 = 0xee11fe01,
7 = 0xb34cfe01,
8 = 0xf10efe01,
9 = 0xf20dfe01,
Recall = 0xbe41fe01,
0 = 0xf30cfe01,
Delete = 0xef10fe01,

Thanks

Al

Post by **The Robman** » Tue Dec 15, 2015 11:34 am

it's not totally clear how we're supposed to read that hex, but based on the fact that the last two bytes are fixed, I went with the assumption that you read it completely backwards, and so I came up with this...

http://www.hifi-remote.com/forums/dload ... e_id=13774

mdavej · Post by **mdavej** » Tue Dec 15, 2015 11:52 am

One possibility is reading right to left - device, complement, command, complement. I don't know the subdevice, possibly just zero.

So Power = 0xe31cfe01 means Device 1, OBC 1C (28 decimal)

Can you have the user try that?

alanrichey · Post by **alanrichey** » Tue Dec 15, 2015 12:14 pm

Thanks both. See http://placeshiftingenthusiasts.com/for ... 00/#p11772

Post by **The Robman** » Tue Dec 15, 2015 12:36 pm

mdavej wrote:One possibility is reading right to left - device, complement, command, complement. I don't know the subdevice, possibly just zero.

So Power = 0xe31cfe01 means Device 1, OBC 1C (28 decimal)

Can you have the user try that?

Yup, that's exactly what I did, and I got OBC 28 for POWER also. The sub-device is not used as it is the complement of the device code.

mdavej · Post by **mdavej** » Tue Dec 15, 2015 2:41 pm

Great minds think alike

msmoby-sling · Post by **msmoby-sling** » Tue Dec 15, 2015 11:30 pm

Hi Guys, I am the user and I am so many time zones ahead that I had finished work and was at a cinema - I arrived home at 0045 to find all this info - but was scared to try - lest I would never sleep and be divorced.

I wish to thank Alan for passing my question on and for your time and effort.

Woke up at 0600 - I followed your advice to the letter and was certain it would work.

First time - it didn't worK..

I kept the faith and fitted the IR BLASTER supplied with the 350 - not necessary with a UK SKY satellite receiver - but hey ..

SUCCESS

THANK YOU, THANK YOU...

alanrichey · Post by **alanrichey** » Wed Dec 16, 2015 12:09 am

Good, glad you are sorted. And my thanks to the lads as well.

Post by **The Robman** » Wed Dec 16, 2015 7:30 am

Good to hear. I am curious to know where you found the hex codes for the buttons.

johnnyhoting · Post by **johnnyhoting** » Wed Jan 23, 2019 6:08 pm

hey
could someone try to help me to get the slinbox to work with the tvip s-box 410

http://tvip.ru/en/media-center/sbox-410

have tried to get this bin from this thread to work with it but no success

thanks johnny

Post by **The Robman** » Thu Jan 24, 2019 9:59 am

The site where the codes above were found only lists the one remote code set, which would tend to imply that all boxes use the same code.

http://wiki.tvip.ru/en/ir_rc_s310_s400

Are you 100% confident that you know how to install a Slingbox bin and test it? Read the instructions in the link below and if it still doesn't work, post answers to the troubleshooting questions here.

http://www.hifi-remote.com/forums/viewtopic.php?t=16485

johnnyhoting · Post by **johnnyhoting** » Thu Jan 24, 2019 12:48 pm

Hey i am pretty sure that i am doing it right,,, but probably i still doing something wrong, do you know if there is any youtube videos to follow, when someone add the bin file?
I have one slingbox solo and one pro hd and i did not get it working with either of them.
Johnny

alanrichey · Post by **alanrichey** » Sun Jan 27, 2019 8:33 pm

Did you follow the link to the instructions thar Rob provided?

Post by **The Robman** » Mon Jan 28, 2019 6:39 pm

The Robman wrote:Read the instructions in the link below and if it still doesn't work, post answers to the troubleshooting questions here.

http://www.hifi-remote.com/forums/viewtopic.php?t=16485

JP1 Remotes

TVIP box

TVIP box

tvip s410 remote bin

Thanks for answer