JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

RS 2116 and NEC1 2DEV Combo device problems

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Beginners
View previous topic :: View next topic  
Author Message
jhstn58



Joined: 14 Sep 2003
Posts: 10
Location: Nashville, TN

                    
PostPosted: Thu Oct 09, 2003 4:21 pm    Post subject: RS 2116 and NEC1 2DEV Combo device problems Reply with quote

I have an integra receiver that I use as a house amp. Because I was unable to find a Devices file for this particular brand, I taught my 2116 the basic commands I need, then created a keymap master file.

The problem is that, while the protocol for all commands is the same (NEC1), certain of the commands use a different subdevice code than others (for example discrete power on is on subdevice 108 and discrete power off is on 109). So in keymap master I selected as the protocol NEC1 2DEV Combo (since that seemed logical), added the appropriate byte2 codes for each command depending on the subdevice, then downloaded it back into the remote.

Unfortunately, none of the codes then worked. I had been able to make it work earlier by uploading into IR. exe one keymap master device file for each of the separate subdevices, but this requires additional keymoves and the use of another device button in my remote's configuration. In addition, for some strange reason, the discrete power off commands fails to work after a few days.

Does the NEC1 2DEV Combo protocol not intende to function the way I thought, or is there something else I should do to make it work for my receiver?
_________________
Jim
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21211
Location: Chicago, IL

                    
PostPosted: Thu Oct 09, 2003 4:58 pm    Post subject: Reply with quote

The correct protocol to select is "NEC1 Combo", this one keeps the main device code fixed and let's you specify the sub-device code in the "byte2" column.

Given that you mentioned your sub-devices are 108 and 109, I'm going to take a wild guess that your main device code is 210,am I right? If so, your Integra uses the same signals as Onkyo receivers, so you can probably use any of the Onkyo device upgrades in the file section.

The 2DEV combo is designed to combine signals where both the device code and sub-device codes are different.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
jhstn58



Joined: 14 Sep 2003
Posts: 10
Location: Nashville, TN

                    
PostPosted: Thu Oct 09, 2003 5:17 pm    Post subject: Reply with quote

Thanks. That makes sense, and yes, I will try the Onkyo codes.
_________________
Jim
Back to top
View user's profile Send private message
jhstn58



Joined: 14 Sep 2003
Posts: 10
Location: Nashville, TN

                    
PostPosted: Thu Oct 09, 2003 5:22 pm    Post subject: Reply with quote

Looking at NEC1 in keymap master, I don't see any place to specify which subdevice is involved. The only instruction is Enter Device Code; byte2 = sub-device. Does that mean I put "108" or "109" in each row of each command (rather than a 1 or a 2)?
_________________
Jim
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21211
Location: Chicago, IL

                    
PostPosted: Thu Oct 09, 2003 9:20 pm    Post subject: Reply with quote

"byte2 = sub-device" means that byte2 column is where the sub-device goes, so yes, this is where the 108 or 109 goes.

Before you go to the effort of creating a new upgrade from scratch, check out the Onkyo upgrades as not only will one of them probably do "as is", but they will also show you how to use the NEC1 Combo.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
johnsfine
Site Admin


Joined: 10 Aug 2003
Posts: 4766
Location: Bedford, MA

                    
PostPosted: Thu Oct 09, 2003 9:21 pm    Post subject: Re: RS 2116 and NEC1 2DEV Combo device problems Reply with quote

jhstn58 wrote:
one keymap master device file for each of the separate subdevices, but this requires additional keymoves and the use of another device button in my remote's configuration.


It doesn't require use of a second device button. You can have an upgrade device that is not assigned to any device key but just used as the base for KeyMoves. You can leave the buttons sheet on that upgrade blank to avoid wasting space.

jhstn58 wrote:
In addition, for some strange reason, the discrete power off commands fails to work after a few days.


I've got no guess about why that happened. But I think if you went through the whole process carefully you'd either discover it doesn't happen or you'd find out what really happened.

But, as Rob said, starting with an Onkyo upgrade using the correct combo protocol is probably a better way.
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Beginners All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control