JP1 Remotes

dob1 · Joined: 10 Oct 2015 Posts: 4

Hi guys,
I need a Slingbox PRO remote bin file for Nippon Antenna GT30 remote. It is for a rare little box that allows reception of Japanese FTA digital channels on old analog TVs. I have installed Slingbox for my girlfriend to be able to watch some channels from back home but cannot find a code for this remote. I also got URC9960 universal remote and have learned the codes to it, read them out with JP1, but they are odd and some of the buttons are with Gap-524-1566-16 protocol that I cannot use in RM to generate bin file. Even for the buttons that seam decoded properly, when I create bin file and load into Slingbox, it doesn't work, so no ideas, I am stuck, please help Crying or Very sad

Many thanks,
BR
Dob

Details are below (I can also send the .ir file if you need):

LEARNED SIGNALS:
LEARNED CODE DATA
# Device Button Key Protocol Device SubDevice OBC Hex Cmd EFC Misc Note
1 VCR Power Gap-524-1566-16? 138 4 8A.4
2 VCR VOL+ Sharp 1 20 28 083
3 VCR VOL- Sharp 1 21 A8 079
4 VCR CH+ JVC1 205 4 DF 180
5 VCR CH- Gap-524-1565-16? 206 4 CE.4

LEARNED IRP DATA
# IRP Form
1 {41.9k,522,msb}<1,-1|1,-3>(4,-2,A:16,1,-23.3m)+{A=$5120}; Alt leadout form: ^48m
2 {41.7k,244,msb}<1,-3|1,-7>(A:15,1,-47.3m,B:15,1,-43.4m)+{A=$40A2,B=$435D}; Alt leadout form: ^132m
3 {41.7k,244,msb}<1,-3|1,-7>(A:15,1,-45.7m,B:15,1,-45.7m)+{A=$42A2,B=$415D}; Alt leadout form: ^67m
4 {41.9k,522,msb}<1,-1|1,-3>(4,-2,A:16,1,-21.2m)+{A=$B320}; Alt leadout form: ^48m
5 {41.9k,522,msb}<1,-1|1,-3>(4,-2,A:16,1,-21.2m)+{A=$7320}; Alt leadout form: ^48m

LEARNED RAW DATA:
# Device Button Key Notes Freq Raw Timing Data
1 VCR Power 41884 Repeat: +2052 -1046 +524 -514 +524 -1570 +524 -514 +524 -1570 +524 -514 +524 -514 +524 -514 +524 -1570 +524 -514 +524 -514 +524 -1570 +524 -514 +524 -514 +524 -514 +524 -514 +524 -514 +500 -23328
2 VCR VOL+ 41666 Once: +240 -1710 +240 -736 +240 -736 +240 -736 +240 -736 +240 -736 +240 -736 +240 -1710 +240 -736 +240 -1710 +240 -736 +240 -736 +240 -736 +240 -1710 +240 -736 +240 -47284
Repeat: +240 -1710 +240 -736 +240 -736 +240 -736 +240 -736 +240 -1710 +240 -1710 +240 -736 +240 -1710 +240 -736 +240 -1710 +240 -1710 +240 -1710 +240 -736 +240 -1710 +240 -43350 +240 -1710 +240 -736 +240 -736 +240 -736 +240 -736 +240 -736 +240 -736 +240 -1710 +240 -736 +240 -1710 +240 -736 +240 -736 +240 -736 +240 -1710 +240 -736 +240 -47284
Extra: +240 -1710 +240 -736 +240 -736 +240 -736 +240 -47284
3 VCR VOL- 41666 Repeat: +240 -1718 +240 -730 +240 -730 +240 -730 +240 -730 +240 -1718 +240 -730 +240 -1718 +240 -730 +240 -1718 +240 -730 +240 -730 +240 -730 +240 -1718 +240 -730 +240 -45652 +240 -1718 +240 -730 +240 -730 +240 -730 +240 -730 +240 -730 +240 -1718 +240 -730 +240 -1718 +240 -730 +240 -1718 +240 -1718 +240 -1718 +240 -730 +240 -1718 +240 -45652
4 VCR CH+ 41884 Repeat: +2052 -1042 +524 -1574 +500 -534 +524 -1574 +524 -1574 +500 -534 +500 -534 +524 -1574 +524 -1574 +500 -534 +500 -534 +524 -1574 +500 -534 +500 -534 +500 -534 +500 -534 +500 -534 +524 -21180
5 VCR CH- 41884 Repeat: +2052 -1042 +524 -512 +500 -1594 +500 -1594 +500 -1594 +524 -512 +524 -512 +500 -1594 +500 -1594 +524 -512 +524 -512 +500 -1594 +524 -512 +524 -512 +524 -512 +524 -512 +524 -512 +500 -21196

vickyg2003 · Posted: Sat Oct 10, 2015 1:45 pm Post subject:

It looks like you are going to need a custom protocol. The signals have a different number of pulses, which usually indicates a phase style learn. I'm not good at figuring those out.

Do the learns work?

dob1 · Joined: 10 Oct 2015 Posts: 4

Hi again,
Thanks a lot for your quick reply.
I uploaded ir file to:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=13605

I am not 100% sure that the 9960 with learned codes would actually work and control the FTA tuner as I don't have it with me, but I assume it would as the learning was straight forward and remote received the code transmission without any problems, and I as repeated some of the buttons, it was always learned with the same data.

BR
Dob

vickyg2003 · Posted: Sat Oct 10, 2015 7:51 pm Post subject:

Do you absolutely need the volume+ and - keys?

The vol keys are a different protocol than the ch-ch+ and power keys. In a remote we'd divide that into two different protocols, and use keymoves, but that isn't an option in the slingbox as far as I know.

Its probably something we can do, but it will be difficult.

vickyg2003 · Posted: Sat Oct 10, 2015 11:04 pm Post subject:

Here is an RDMU with the custom protocol in for the power and channel keys
see if you can make a Bin from this.
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=13606

dob1 · Joined: 10 Oct 2015 Posts: 4

WORKING !!!!!
Amazing, thanks a million Very Happy

How have you done it???
Which tools you had to use to convert the recorded remote data and timing info into the protocol?

BTW, volume buttons are not important, CH and PWR are more than enough Smile

Once again many thanks for great work
BR
Dob

vickyg2003 · Posted: Sun Oct 11, 2015 8:52 am Post subject:

The Robman · Posted: Sun Oct 11, 2015 9:56 am Post subject:

Here's some more info on PB (Protocol Builder):
http://www.hifi-remote.com/wiki/index.php?title=Protocol_Builder
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

dob1 · Joined: 10 Oct 2015 Posts: 4

Thanks a lot Smile