ADTH IT 7200 Digital Terrestrial STB (Atlanta DTH)

engraylo · Post by **engraylo** » Sun Sep 06, 2015 2:09 am

Please help me to create BIN File for Slingbox Remote. Thanks.

DETAILS

1. Device: ADTH IT 7200
2. Type of device: Digital Terrestrial Set-Top-Box
3. Year: 2014
4. JP1/UEI Remote model: I'm using Slingbox, I don't know how to use JP1
5. Do you have a JP1 cable? No
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? No
10. Learning remote question? n/a
11. Have you tried the JP1 Lookup Tool? Yes, didn't find anything

Website of manufacturer: http://www.adth.com/enweb/products_en_it7200.html

Post by **vickyg2003** » Sun Sep 06, 2015 2:19 am

I moved this to the slingbox forum.

alanrichey · Post by **alanrichey** » Mon Sep 07, 2015 1:24 am

The only Apex box I can find is the DT-250 and that is already in the File Section. I assume you have already tried that one ?

engraylo · Post by **engraylo** » Mon Sep 07, 2015 7:29 pm

Sorry for the wrong post it should be ADTH IT7200 not APEX

I also tried ADTH IP8950 but unsuccessful

Subject: IT 7200
Digital Terrestrial Set-Top-Box (Atlanta DTH)

DETAILS

1. Device: Atlanta DTH IT 7200
2. Type of device: Digital Terrestrial Set-Top-Box
3. Year: 2014
4. JP1/UEI Remote model: I'm using Slingbox, I don't know how to use JP1
5. Do you have a JP1 cable? No
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? No
10. Learning remote question? n/a
11. Have you tried the JP1 Lookup Tool? Yes, didn't find anything

Website of manufacturer: http://www.adth.com/enweb/products_en_it7200.html

alanrichey · Post by **alanrichey** » Tue Sep 08, 2015 1:10 am

Couldn't find this box either. Closest was the ADTH IC7600. Done a remote for that at https://www.hifi-remote.com/forums/dload ... e_id=13530

Any good ?

docdanz · Post by **docdanz** » Wed Sep 09, 2015 8:42 pm

engraylo wrote:Sorry for the wrong post it should be ADTH IT7200 not APEX

I also tried ADTH IP8950 but unsuccessful

Subject: IT 7200
Digital Terrestrial Set-Top-Box (Atlanta DTH)

DETAILS

1. Device: Atlanta DTH IT 7200
2. Type of device: Digital Terrestrial Set-Top-Box
3. Year: 2014
4. JP1/UEI Remote model: I'm using Slingbox, I don't know how to use JP1
5. Do you have a JP1 cable? No
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? No
10. Learning remote question? n/a
11. Have you tried the JP1 Lookup Tool? Yes, didn't find anything

Website of manufacturer: http://www.adth.com/enweb/products_en_it7200.html

Hello sir, i am looking for this also.
did you have any luck finding a remote?
thanks..

alanrichey · Post by **alanrichey** » Thu Sep 10, 2015 1:29 am

Have you tried the remote I suggested ?

docdanz · Post by **docdanz** » Thu Sep 10, 2015 5:45 am

alanrichey wrote:Have you tried the remote I suggested ?

hello sir, am gonna try it later,
will let you know!

docdanz · Post by **docdanz** » Thu Sep 10, 2015 6:53 am

i have tried and loaded the pl bin file to my slingbox m1
it was a successful loading but unfortunately the remote
does not work for it.

can you hepl me out again please?

alanrichey · Post by **alanrichey** » Thu Sep 10, 2015 11:21 am

What about the questions in the installation instructions that I ask you to answer ?

docdanz · Post by **docdanz** » Thu Sep 10, 2015 3:53 pm

1. What model Slingbox do you have?
M!
2. Was there any error message after you typed in the Code and tapped the Test button?
n/a
3. Did you give the commands plenty of time to react? (I have a DVR that takes about 6-8 seconds to power up/down)
yes
4. If you are using a Solo did you try both BIN files?
n/a
5. After completing the setup do any of the buttons work?
no, they only flicker for a sec but do not change channel

6. If you are installing on a Solo or Pro-HD or older box that uses an external IR Blaster, have you used a Digital Camera or Mobile Phone Camera to confirm the IR Blaster is actually firing when you tap the Power button? (Watch the tip of the IR Blaster through the viewfinder while you tap a button. You should see a white (not red) flash. Test it on a real remote so you know what you are looking for). If you are using a 350/500 have you tried using the external blaster?
n/a
7. Have you experimented with the placement of the IR Blaster? On some devices this is critical so don’t give up too quickly. Try shining a flashlight at the front of the receiver and see if you can see the IR receiver behind the smoked glass.
yes, left and right side
8. Are you sure the device is working correctly using the real remote?
yes
9. Are you sure your device is set to use IR ? Many boxes can operate on RF or IR and if it is set to RF then the Slingbox will not affect it.
no, but the remote has a light or led at the tip
10. If you have a device that supports multiple remote addresses (DirecTV, Dish Network, Tivo…) are you sure the remote address is set to the default ?
n/a
11. Have you tried resetting the Slingbox. ? This has been found to help.
no
12. Do you have access to a Logitech Harmony Universal Remote? If so let me know.
no

alanrichey · Post by **alanrichey** » Fri Sep 11, 2015 12:45 am

Why n/a for Question 2 ? Either you got a message or you didn't ?

If you didn't get a message then I can only assume the ADTH IC7600 and the ADTH IT7200 use different codes, so we are stuck.

docdanz · Post by **docdanz** » Fri Sep 11, 2015 2:14 am

alanrichey wrote:Why n/a for Question 2 ? Either you got a message or you didn't ?

If you didn't get a message then I can only assume the ADTH IC7600 and the ADTH IT7200 use different codes, so we are stuck.

uh oh. sorry for the ambiguos answer.
no i didn't get an error message.

docdanz · Post by **docdanz** » Fri Sep 11, 2015 2:23 am

http://tvplus.abs-cbn.com/uploads/waive ... ations.pdf

this is what i have.
hope it can help..

alanrichey · Post by **alanrichey** » Fri Sep 11, 2015 7:22 am

Afraid not.