View previous topic :: View next topic |
Author |
Message |
jeajea
Joined: 24 Feb 2010 Posts: 283 Location: USA |
Posted: Tue Apr 07, 2015 9:42 am Post subject: Fixed Pioneer DVD upgrade for I67100 |
|
|
It was an RMIR problem
http://www.hifi-remote.com/forums/viewtopic.php?t=16072
My Pioneer DV-410V upgrade works correctly with RMIR 202a and Insignia
67100 extender 1.01
I loaded it in RMIR v2.03 alpha 28 build 19 and changed the remote to
Insignia remote 67100 extender v3.03 and saved it to a new file.
I added the upgrade to the “remote” as dev2 and uploaded it to the remote.
Power, power off, enter and open/close don't work
Play, pause, stop, skip FWD and skip back work.
I think I have a protocol/protocol ID problem.
In the upgrade Pioneer mix is set but learns from the remote are NEC1.
Successful learns from the original remote have protocol Pioneer.
Power and open/close from the original show **multiplex**.
Rmir file, upgrade, and captures are in this zip file
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=13302 _________________ Jim Anderson
Last edited by jeajea on Thu Apr 09, 2015 2:39 pm; edited 1 time in total |
|
Back to top |
|
|
jeajea
Joined: 24 Feb 2010 Posts: 283 Location: USA |
Posted: Wed Apr 08, 2015 7:00 am Post subject: |
|
|
The upgrade use
Code: | Protocol: Pioneer MIX
Protocol ID: 00 7E
Device 1 : 163
Device 2 : 175
Cmd1 (OBC) : 153
Fixed Data : 3A 66 FA 00 00 OA
|
I don’t know what needs to be changed. _________________ Jim Anderson |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Wed Apr 08, 2015 10:55 am Post subject: |
|
|
Jim,
I don't see any reason to think there is a problem with protocol executors or PIDs. Your learns either show Pioneer, or NEC1 signals with device 4 or device 1. The RMIR file contains an upgrade with setup code 0758 (Vizio TV) which is NEC1 device 4, and another with setup code 2010 which is NEC1 device 1 (iView). So I suppose that the issue will be found in Keymoves or Special Functions.
Learns which display **Multiple** include more than one IR signal. Click on **Multiple** to see additional info. BTW, posting a JPG of the learned tab is less useful than posting the RMIR file from the learning remote. The RMIR file is smaller than a JPG, and much smaller when zipped, yet it contains more information. |
|
Back to top |
|
|
jeajea
Joined: 24 Feb 2010 Posts: 283 Location: USA |
Posted: Wed Apr 08, 2015 3:29 pm Post subject: Pioneer learns |
|
|
I uploaded an rmir file with the learns. The Pioneer remote learns are on
device DVD and the learns from the Insignia 67100 are on device TV. In
both cases yellow is power and blue is open/close
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=13308 _________________ Jim Anderson |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Wed Apr 08, 2015 3:41 pm Post subject: |
|
|
For the learns with Multiple, use Prefix Device 163, Prefix Command 153, Device 175 and whatever corresponding OBC. |
|
Back to top |
|
|
jeajea
Joined: 24 Feb 2010 Posts: 283 Location: USA |
|
Back to top |
|
|
|