JP1 Remotes

[Lindahl]

I can't seem to learn from the Roku remotes (RF only?).

What are the codes for 'skip back', 'menu go back' and '*'?

[mdavej]

Here you go. Prepend 00 to the EFCs to make them 5 digits long. Or load the device upgrade file with Remote Master.

http://www.hifi-remote.com/forums/viewtopic.php?p=117292#117292

[Lindahl]

How do I add them? I tried Key Move and the EFCs for Roku, but that didn't work. I have a Roku 2, if that matters.

Device code 2731, I tried both 1E and E1

[Lindahl]

Well, I just scanned through every hex code. The Roku 2 doesn't have any hex codes that work for Back, * or Replay. Well thats really annoying. Does anyone have any success with any other currently available Roku device?

[Lindahl]

This was taken from the Roku forums website.

http://forums.roku.com/viewtopic.php?f=28&t=32753&p=216246&hilit=IR+hex+code#p216298

Back button:
0000 006C 0044 0000 0159 00AD 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 05CF 0159 00AD 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 00AD

Replay button:
0000 006C 0021 0022 0159 00AE 0016 0016 0016 0040 0016 0016 0016 0040 0016 0016 0016 0040 0016 0040 0016 0040 0016 0016 0016 0040 0016 0016 0016 0016 0016 0016 0016 0016 0016 0040 0016 0040 0016 0016 0016 0016 0016 0016 0016 0040 0016 0040 0016 0040 0016 0040 0016 0016 0016 0040 0016 0040 0016 0040 0016 0016 0016 0016 0016 0016 0016 0016 0016 0040 0016 05CF 0159 00AE 0016 0016 0016 0040 0016 0016 0016 0040 0016 0016 0016 0040 0016 0040 0016 0040 0016 0016 0016 0040 0016 0016 0016 0016 0016 0016 0016 0016 0016 0040 0016 0040 0016 0016 0016 0016 0016 0016 0016 0040 0016 0040 0016 0040 0016 0040 0016 0040 0016 0040 0016 0040 0016 0040 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016

* Button:
0000 006C 0021 0022 0159 00AE 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 05CF 0159 00AE 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0016

[Lindahl]

I used IRTool.exe to decode the HEX codes above. It looks like Roku used a different Device and Subdevice code.

The other Roku buttons are 190.239. The Back, Info, and * buttons are 234.194.

Info EFC: 00201
Back EFC: 00198
* EFC: 00005

I went the 'Devices' tab and clicked the 'New' button:

Setup Code: 0000
Device: 234
Sub Device: 194

I then went to the 'Key Move' tab, and created 3 Key Moves for each of the above EFCs.

Device Type: STB
Setup Code: 0000
EFC: (see above for each key)

All three buttons work now!

Is there a better way to do this? I'm a complete novice to JP1 and RMIR - used it for the first time this morning.

[mdavej]

The simpler way would have been to load my linked upgrade. All commands are already there.

IRTool is very out of date and probably gave you questionable NEC decodes instead of Roku protocol, hence the unusual device.subdevice codes. You should use IRScrutinizer to analyze pronto hex instead.

[Lindahl]

[mdavej]

Devices New Open

[Lindahl]

Thanks! Works great.