View previous topic :: View next topic |
Author |
Message |
BTUx9
Joined: 04 Jul 2005 Posts: 8
|
Posted: Wed Feb 04, 2015 6:14 pm Post subject: Changing from Atlas 1056B01 to B03 |
|
|
I realize the processor changed and the B03 uses JP2 (FTDI arrives tomorrow).
One of my devices, a TCL TV, I used this device upgrade: http://www.hifi-remote.com/forums/dload.php?action=file&file_id=9115
Problem: the protocol. I'm looking for an equivalent for the new processor. There seems to be a PID: 00 91 available on the B03, but I'm not sure how to determine the params. |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3365
|
Posted: Thu Feb 05, 2015 1:47 am Post subject: |
|
|
Do you need a RCA Combo at 38KHz? PID 0091 allows only 1 device (typically 15 for a TV). One of the upgrades includes switching to other components using other device numbers. In any case, I'll need a couple of days before posting a fix. |
|
Back to top |
|
|
BTUx9
Joined: 04 Jul 2005 Posts: 8
|
Posted: Thu Feb 05, 2015 11:59 am Post subject: |
|
|
Many thanks, 3FG. Although I've used JP1 remotes for many years, I've never dug into the low-level underpinnings like protocols. |
|
Back to top |
|
|
BTUx9
Joined: 04 Jul 2005 Posts: 8
|
Posted: Thu Feb 05, 2015 3:09 pm Post subject: |
|
|
WOW, what are the chances!
Turns out that one of the upgraded device codes (in flash) is for my TV! I can now modify and adjust it as I wish.
Thank you very much for offering to help me, 3FC, but I think I have all I need, now |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3365
|
Posted: Thu Feb 05, 2015 3:28 pm Post subject: |
|
|
So, what setup code works? |
|
Back to top |
|
|
BTUx9
Joined: 04 Jul 2005 Posts: 8
|
Posted: Thu Feb 05, 2015 4:40 pm Post subject: |
|
|
The code is 2434.
It's all working well, now, except I can't turn off the @#$!@ backlighting. Pressing setup twice didn't work (it worked on 1056B01). |
|
Back to top |
|
|
|