View previous topic :: View next topic |
Author |
Message |
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
Posted: Tue Sep 30, 2014 4:40 pm Post subject: |
|
|
Blackssr, if you post your file, Mathdon can probably fix RMIR to handle your config. |
|
Back to top |
|
|
blackssr
Joined: 27 Sep 2014 Posts: 44
|
Posted: Wed Oct 01, 2014 11:28 am Post subject: |
|
|
mdavej wrote: | Blackssr, if you post your file, Mathdon can probably fix RMIR to handle your config. |
I will as soon as I figure out how. |
|
Back to top |
|
|
mathdon Expert
Joined: 22 Jul 2008 Posts: 4523 Location: Cambridge, UK |
Posted: Wed Oct 01, 2014 11:47 am Post subject: |
|
|
wkupike2000
Please try RMIR v2.03 Alpha 24g. This fixes the bug that prevented your remote from loading.
blackssr
I cannot promise that this new version fixes your bug, as I haven't got your raw download, but it is worth a try. It should, however, prevent you from getting a message about an error in the RDF. The RDF was picking up the wrong protocol for PID=0111 and I have amended protocols.ini to prevent this. _________________ Graham |
|
Back to top |
|
|
blackssr
Joined: 27 Sep 2014 Posts: 44
|
|
Back to top |
|
|
wkupike2000
Joined: 28 Sep 2014 Posts: 22
|
Posted: Wed Oct 01, 2014 7:54 pm Post subject: |
|
|
mathdon wrote: | wkupike2000
Please try RMIR v2.03 Alpha 24g. This fixes the bug that prevented your remote from loading.
blackssr
I cannot promise that this new version fixes your bug, as I haven't got your raw download, but it is worth a try. It should, however, prevent you from getting a message about an error in the RDF. The RDF was picking up the wrong protocol for PID=0111 and I have amended protocols.ini to prevent this. |
The new version corrected my issue and I'm now able to download from the remote. Thanks!! |
|
Back to top |
|
|
blackssr
Joined: 27 Sep 2014 Posts: 44
|
Posted: Wed Oct 01, 2014 8:00 pm Post subject: |
|
|
wkupike2000 wrote: | mathdon wrote: | wkupike2000
Please try RMIR v2.03 Alpha 24g. This fixes the bug that prevented your remote from loading.
blackssr
I cannot promise that this new version fixes your bug, as I haven't got your raw download, but it is worth a try. It should, however, prevent you from getting a message about an error in the RDF. The RDF was picking up the wrong protocol for PID=0111 and I have amended protocols.ini to prevent this. |
The new version corrected my issue and I'm now able to download from the remote. Thanks!! |
Good deal. Mine still errors out and asks to restart and save raw file. I saved default and uploaded as per instructions.
Are you auto or HID? when downloading?
(mod edit) Link to uploaded file: http://www.hifi-remote.com/forums/dload.php?action=file&file_id=12799 |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
Posted: Wed Oct 01, 2014 8:37 pm Post subject: |
|
|
Auto/HID doesn't make any difference. Auto will pick HID if all is working properly. HID is the actual interface used for Xsight. Those of use with lots of different remotes use Auto mainly for convenience. |
|
Back to top |
|
|
wkupike2000
Joined: 28 Sep 2014 Posts: 22
|
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
Posted: Wed Oct 01, 2014 11:50 pm Post subject: |
|
|
Post your RMIR file as well.
Realize that no functions will be automatically assigned to the screen. You need to do that. |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3368
|
Posted: Thu Oct 02, 2014 12:26 am Post subject: |
|
|
wkupike2000,
I own a ARRX12G, so I tried these upgrades in my remote. They load fine, and I checked with an IR Widget to see if they shoot the intended signals. The DirecTV upgrades do send the correct signals. Regarding the RCA upgrade, something is wrong with either the upgrade or perhaps protocols.ini. All of the functions are read in as having an OBC of 0. This is not a Xsight problem; the same thing happens with a JP1.3 remote. I've uploaded a replacement upgrade to the Diagnosis area for you to try.
As mdavej has said, note that no functions will appear on the screen unless you explicitly assign functions to the softkeys using the Buttons tab in the Device Upgrade Editor. By default, loading an upgrade made for a non-Xsight remote will assign identifiable functions to existing hard buttons. If the name of a function in the upgrade can't correlated to an existing hard button, the function is left unassigned-- and RMIR tells you that.
When you are testing to see if an upgrade works at all, be sure to look at the upper right corner of the screen. When IR is being sent, a small red icon will turn on. |
|
Back to top |
|
|
wkupike2000
Joined: 28 Sep 2014 Posts: 22
|
Posted: Thu Oct 02, 2014 6:33 am Post subject: |
|
|
Thanks for tips on assigning to the screen and the correction to the RT2390 file. Here's my RMIR raw download file. I have not added the replacement upgrade file for the RT2390 as I wanted to keep everything as it was when I described my symptoms.
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=12802
I don't understand the below statement unless you mean the small icon in the upper center of the Xsight. When I select a device I used an upgrade for and hit a button on the Xsight, the little icon in the top center will flash red.
"When you are testing to see if an upgrade works at all, be sure to look at the upper right corner of the screen. When IR is being sent, a small red icon will turn on" |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
Posted: Thu Oct 02, 2014 7:40 am Post subject: |
|
|
Sorry, could we have your .rmir file too? |
|
Back to top |
|
|
wkupike2000
Joined: 28 Sep 2014 Posts: 22
|
Posted: Thu Oct 02, 2014 8:44 am Post subject: |
|
|
Sorry for the ignorance but I couldn't locate an .rmir file. What would the name look like? I only saw shortcuts and icons for RMIR but no files with that extension. I'll have to upload it late this as I don't have access at work & have a function after. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
Posted: Thu Oct 02, 2014 9:25 am Post subject: |
|
|
When you save your file, it should default to RMIR and will be where ever you choose. It has all your devices and descriptions. The IR type contains no descriptive data whatsoever. |
|
Back to top |
|
|
wkupike2000
Joined: 28 Sep 2014 Posts: 22
|
Posted: Thu Oct 02, 2014 10:56 am Post subject: |
|
|
Maybe I'm doing it wrong as I'm new to RM/RMIR as of this past week. To get the file I uploaded, I opened RMIR, downloaded from remote, then I di the Raw Download. The file from that had the .IR extension only. Could you explain how to get the RMIR file? Thanks! |
|
Back to top |
|
|
|