View previous topic :: View next topic |
Author |
Message |
Tolaris
Joined: 14 Sep 2014 Posts: 3
|
Posted: Sun Sep 14, 2014 2:43 pm Post subject: URC-6430 power button with CombiControl |
|
|
I got a bit off-topic on the forum.flirc.tv. Perhaps you can better help me?
http://forum.flirc.tv/index.php?/topic/1319-code-to-use-with-flirc-and-urc6430
I have a URC-6430 which I'm using to control a Panasonic TV (on the TV button) and a Flirc+XBMC+Linux PC device (on "PVR" button). I use CombiControl in "watch TV" mode most of the time. I'd like the Power button in this mode to send power to the TV, not both devices, and for holding the button to continue sending the signal. Is this possible? |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Sun Sep 14, 2014 4:16 pm Post subject: |
|
|
Removing devices from master power is detailed in the manual. Alternately, just use our Remote Master software and uncheck the box for the devices to omit.
There is no way to extend duration yet unless you want to do a custom protocol with RM. |
|
Back to top |
|
|
Tolaris
Joined: 14 Sep 2014 Posts: 3
|
Posted: Wed Sep 17, 2014 9:55 am Post subject: |
|
|
mdavej wrote: | Removing devices from master power is detailed in the manual. |
Thanks for the help. Which manual? The URC-6430 manual does not detail this as far as I can see. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Wed Sep 17, 2014 10:57 am Post subject: |
|
|
Try the procedure on page 8 of the 6440 manual:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=12385
I don't know if it will actually work on a 6430. If not, you can do it in Remote Master.
Otherwise, just press TV then Power then Watch TV to power on. To power off, press TV then Power. Besides the power macro, all Watch TV does is assign different groups of keys to different devices. |
|
Back to top |
|
|
yaworski
Joined: 22 Jun 2014 Posts: 454 Location: Warsaw, Poland |
Posted: Wed Sep 17, 2014 11:03 am Post subject: |
|
|
Hi Tolaris,
Enter setup mode, select Combi Control button you want to change (Watch TV or Watch Movie), press device button you want to exclude (or include if already excluded), press power button.
After pressing power the selected device button will blink two times if the device is excluded or four times it's included in the macro. |
|
Back to top |
|
|
Tolaris
Joined: 14 Sep 2014 Posts: 3
|
Posted: Wed Sep 17, 2014 5:03 pm Post subject: |
|
|
Thanks all. That sorted it. |
|
Back to top |
|
|
|