View previous topic :: View next topic |
Author |
Message |
Liland
Joined: 10 Sep 2014 Posts: 12
|
Posted: Wed Sep 10, 2014 12:01 pm Post subject: Sagemcom RTI90 and RTI95 |
|
|
I am in desperate need of help with the Boxer DVB-T box RTI90.
I have tried every Sagemcom model In the set up guide on slingbox, but with no luck.
I have also tried Alan Ritchies JP1 file for Sagemcom RT190.
The slingbox I use is the slingbox 350 and I've tried with the built in IR blasters and the IR blaster extender.
I have been in contact with the UK support for slingbox. They have also logged on to my account and try for them self.
I have been in contact with the US support and they have also log onto my account buy remote support and have tried all optional Sagemcom models plus they have tried Alan Ritchies JP1 file and they say it doesn't work.
BoxerTV Denmark:
http://www.boxertv.dk/Produkter/udstyr/boxer-bio-boks/
BoxerTV Sweden:
http://www.boxer.se/tv/hardvara/sagemcom-dt90-hd-box/
Please somebody help me, so I can get this working.
It would be a great help for all the Danish and Swedish people out there as well the use Boxer TV
Best regards
Andreas Liland |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Thu Sep 11, 2014 3:27 am Post subject: |
|
|
I've just revisited this, having assumed that you had done things correctly. Big error
As it turns out I have never built a Custom Remote for the Sagemcom RTI90 so I have no idea what Custom Remote you are talking about (maybe the Sagem RTI90 ?).
So I have now checked out the SagemCom boxes. The Logitech database does not have the RTI90 but it does have the RTI95. Unfortunately it uses an <unknown> IR Protocol.
So once again I have to plead for help from the experts (Sorry about that, but if one of you wants to talk me through this one off-forum I might be able to do it myself next time) I have built the ICT file and uploaded it at http://www.hifi-remote.com/forums/dload.php?action=file&file_id=12740
Thanks |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Liland
Joined: 10 Sep 2014 Posts: 12
|
Posted: Thu Sep 11, 2014 4:51 am Post subject: |
|
|
You are so right Alan. It is the Sagem RTI90 that they (UK slingbox support and US slingbox support) tried.
I just trusted the support, sorry for the confusion.
I have a Logitech Harmony Remote that works fine with the SagemCom RTI90.
I have been told that the only difference between the SagemCom RTI90 and SagemCom RTI95 is a softwareupdate.
Is there anything I can do to help?
Thanks
Liland |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Liland
Joined: 10 Sep 2014 Posts: 12
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Thu Sep 11, 2014 6:09 am Post subject: |
|
|
I suspect the result will be the same as my attempts, but please install your working remote onto my Harmony account. I use the standalone desktop software:
Username: slingboxes
Password: password |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Liland
Joined: 10 Sep 2014 Posts: 12
|
Posted: Thu Sep 11, 2014 3:55 pm Post subject: |
|
|
How do I log in to your Harmony account? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Fri Sep 12, 2014 2:04 am Post subject: |
|
|
Al,
This looks like a 36 bit version of Nokias32. However, there is a lot of jitter in the learns, and I'm not able so far to get decodes which are reasonable. You've learned several repeats of most of the functions, so we can see that the learns show different timings among the repeats of a single function. So I'm inclined to think that the issue with the learned signal is not a problem with the Harmony signals-- if it were we'd get the same timing on each repeat.
When I have this kind of problem with my Widget, it is caused by an excess of IR light from the remote, and I need to pull the remote away from the widget. I usually pull it away until the indicator light stops flashing, and then move the remote a bit closer. Another possible cause of jitter in learns has been pointed out by Vicky: If a warm surface is nearby, the IR emitted by the warm material may overload the widget.
Anyway, I hope you're willing to try learning the signals again. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Fri Sep 12, 2014 3:09 am Post subject: |
|
|
Al,
Actually, I spoke too soon. I think we have enough redundancy to be sure of all of the signals except Last Channel and Exit, which both have the same OBC. So I hope you haven't already started into learning again.
I'll need another day to prepare an executor. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Liland
Joined: 10 Sep 2014 Posts: 12
|
Posted: Fri Sep 12, 2014 5:01 am Post subject: |
|
|
Hi Alan
I have a Harmony Smart Controller that uses a different software, but i did find the RTI95 on your log in... |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Fri Sep 12, 2014 1:44 pm Post subject: |
|
|
3FG wrote: | Al,Actually, I spoke too soon. I think we have enough redundancy to be sure of all of the signals except Last Channel and Exit, which both have the same OBC. So I hope you haven't already started into learning again. | No, you caught me in time
I've done 3 further learns of the Exit and Last_Ch buttons at http://www.hifi-remote.com/forums/dload.php?action=file&file_id=12742 although it is quite possible they are the same OBCs, maybe a 'Back' function. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Fri Sep 12, 2014 1:45 pm Post subject: |
|
|
Liland wrote: | but i did find the RTI95 on your log in... | Yes, that is the one I installed on my Harmony that 3FG is working on to figure out the decode. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Liland
Joined: 10 Sep 2014 Posts: 12
|
Posted: Fri Sep 12, 2014 2:00 pm Post subject: |
|
|
OK, I am waiting with great expectations then... ![Very Happy](images/smiles/icon_biggrin.gif) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Sat Sep 13, 2014 1:38 am Post subject: |
|
|
This executor is going to take a little longer. I had expected to be able to just modify the Nokia32 executor to send the extra 4 bits, but it looks like I'll need to use a different approach. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Sun Sep 14, 2014 10:39 am Post subject: |
|
|
Here's the protocols.ini entry: Code: | [Nokia36]
PID=01 FF
DevParms=Device,Sub Device,X:4
DeviceTranslator=Translator(0,8,0) Translator(1,8,8) Translator(0,8,16) Translator(2,4,28)
FixedData=00 00 00 00
CmdParms=OBC=0
CmdTranslator=Translator()
Code.S3C80=47 93 41 8B 12 87 44 00 00 00 54 9C 2C 00 54 00 22 9C 40 00 CE 00 76 76 00 01 6B 05 B6 05 80 0C 04 10 07 10 06 0A FA 1C 1E F6 01 4C 4C 00 87 64 03 5C 04 F6 FF 4C 4E 37 44 F4 68 07 5C 02 F6 FF 4C 1C 14 F6 01 4C F6 01 0A 7B DC AF 1C 18 F6 01 4C 90 C6 90 C6 28 C6 56 C2 03 2E C6 F8 00 54 F6 01 58 2A F7 5A E6 AF
| The test RMDU file. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|