using IR TRANS to get IR codes for binary files creation

xmauricio · Post by **xmauricio** » Mon Aug 04, 2014 12:52 pm

Barf, thank you for your translation, sure to be a great contribution. Thanks a lot.
Alan, I'll be waiting eagerly for

. Thanks
Vicky, I have the slingbox off and out of my reach. First thing tomorrow I will try your .bin. Thank you very much!

alanrichey · Post by **alanrichey** » Wed Aug 06, 2014 5:05 pm

Very good effort

I've just cleaned it up a bit and added the non-standard commands to the Custom buttons. I put the A,B,C & D buttons on the colour buttons. If they are coloured on your remote then they may be wrong. Easy to fix though.

https://www.hifi-remote.com/forums/dload ... e_id=12670

OK ?

alanrichey · Post by **alanrichey** » Sat Aug 09, 2014 5:38 am

Well ? Did it all work ?

alanrichey · Post by **alanrichey** » Sat Aug 16, 2014 10:58 am

Still nothing. What is wrong with people these days ?

xmauricio · Post by **xmauricio** » Sun Aug 17, 2014 8:31 pm

Guys, please excuse me for my absence.
I spent the past few days without internet access.
Their contributions have worked very well. Both controls (the Vicky and Ann work properly). They are not mapped all the keys, but the most important.
I would love to learn to do the translation from IR trans format at .bin. because surely I'll need a few more keys mapping.
Thank you very much for all the work you have done.
The next two weeks will continue with little internet coverage, again, I apologize if I can not answer messages promptly

Whenever I get a chance I can describe to you the differences in the functioning of the two controls that have provided me

alanrichey · Post by **alanrichey** » Sun Aug 24, 2014 1:08 pm

Another week goes by without any information. I really cannot release this remote until it is confirmed to work in full.

xmauricio · Post by **xmauricio** » Sun Aug 24, 2014 1:42 pm

I have finished testing the customized keys and I can confirm that all work properly.
I check the forum you suggested to locate all the keys on an image to match the original remote.

Thank you so much, again

xmauricio · Post by **xmauricio** » Thu Sep 04, 2014 9:08 am

If you need that I check some specific function, please tell me. For now, all keys are working properly. I would like to look the forum where is the explanation to change the RCU skin, next days

alanrichey · Post by **alanrichey** » Thu Sep 04, 2014 9:57 am

To change the skin, you have 2 options.

1. If you can find a built-in remote that will display the image you want, even if it doesn't work then it is an easy operation. Take a look at http://slingbox.wikia.com/wiki/Skin.toc for some we know about.

2. Design your own from scratch. See http://answers.slingbox.com/thread/8533?tstart=0 Although this works ONLY for the old Slingplayer Desktop. Sling blocked it's use on the web player and later players.

xmauricio · Post by **xmauricio** » Thu Sep 04, 2014 1:20 pm

Thanks Alan!

xmauricio · Post by **xmauricio** » Fri Sep 05, 2014 7:24 am

I have been seeing the first link of previous comment you posted
I attach a picture with the RCU that is more similar with the actual one, and a proposal of the customized buttons allocation.
Do you think that rearrange the custom buttons is a simple task?

http://www.mauricioramirez.co/img/RCN-S ... mented.jpg

alanrichey · Post by **alanrichey** » Sat Sep 06, 2014 10:31 am

As I said in my previous post, if you can find me a built-in Remote that shows this image then yes. Otherwise no.

xmauricio · Post by **xmauricio** » Mon Sep 08, 2014 7:17 am

Ok, the Skin.rcn-synergy is the more similar to my actual remote.
On the slingbox assistant, the rcn synergy is associated to the RCN RC-U63CDR (Cablebox)

alanrichey · Post by **alanrichey** » Mon Sep 08, 2014 10:35 am

First attempt is at https://www.hifi-remote.com/forums/dload ... e_id=12734

You haven''t told me which Slingbox/file you need so both included.

xmauricio · Post by **xmauricio** » Mon Sep 08, 2014 3:40 pm

Hi Alan

Thanks for your files. I am using slingbox pro HD.
I have tested the file you sent, but the RCU that i see is not the RCN Synergy one, is the same as previous remote, but with fewer buttons.

The following link is a video of my selection process:

http://www.mauricioramirez.co/video1.mp4