Samsung SMT-G7400

Need help adding new codes to your Slingbox, this is the place to ask. You're welcome to ask general Slingbox questions here, but be aware that most of us are not Slingbox experts.

Moderator: Moderators

Post Reply
alanrichey
Expert
Posts: 3533
Joined: Mon Mar 24, 2008 7:14 am
Location: UK/USA

Samsung SMT-G7400

Post by alanrichey »

HI everyone

Sorry to be a nuisance but this one is a REAL doozy :D

I installed it on my Harmony and tried it on IRScope and got a right mess back. But after eliminating some of the more obvious rubbish I found an underlying pattern. Each button produced the following

Gap-xxx-yyyy-20 Device aa.bb OBC ccc
Gap-ddd-eeee-37 Device 48.42 OBC ccc

and this is repeated 5 times.

xxx varies between 528 to 556 with 530 being the most common
yyyyy varies between 1486-1513 with 1500 being the most common
aa, bb & ccc vary across the board but are unique to each button.

I've uploaded the ICT file at https://www.hifi-remote.com/forums/dload ... e_id=12578

Does it make any sense ?

Al
Top
mdavej
Expert
Posts: 4647
Joined: Wed Oct 08, 2003 7:08 am

Post by mdavej »

I can't help with decoding. But have you seen this?

http://www.remotecentral.com/cgi-bin/mb ... d.cgi?7145

or this?

https://www.hifi-remote.com/forums/dload ... e_id=11307
Top
alanrichey
Expert
Posts: 3533
Joined: Mon Mar 24, 2008 7:14 am
Location: UK/USA

Post by alanrichey »

Thanks, good call. I should have checked the File Section first :D
Top
Post Reply

Return to “Slingbox”