View previous topic :: View next topic |
Author |
Message |
mikepj
Joined: 16 May 2014 Posts: 4
|
Posted: Fri May 16, 2014 9:53 am Post subject: can it send multiple codes? |
|
|
I would like to be able to quickly and easily turn on/off captioning on the cable TV box. normally this would require 10(!) button presses. is there a way i can program it to send 10 codes with one key press? i don't have a JP1 remote yet; just looking for a way to do this.
thank you for any insights you can offer! |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Fri May 16, 2014 12:36 pm Post subject: |
|
|
The reason I fell in love with these UEI remotes was the macro capability. My 13 step macro to do something that I did routinely really was helpful. When I moved into FAST MACROS I was even more pleased. But most of my TV's also had discrete codes for subtitles. Of course if You have a HDMI cable box you need to turn on the captions via the box instead of at the TV. The problem I see with the menu macro on a cable Box is that some of them hold state so that you don't always have the same button sequence to get to the captions. Of course there might be a discrete for this too. Does your cable company supply a macro capable remote (is there a 6 pin connector in the battery compartment?)
What model cable box do you have? _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
mikepj
Joined: 16 May 2014 Posts: 4
|
Posted: Fri May 16, 2014 12:59 pm Post subject: |
|
|
>The reason I fell in love with these UEI remotes was the macro capability. My 13 step macro to do something that I did routinely really was helpful. When I moved into FAST MACROS I was even more pleased. But most of my TV's also had discrete codes for subtitles. Of course if You have a HDMI cable box you need to turn on the captions via the box instead of at the TV.
that's their situation; the cable box controls for captioning is embarrassingly weak.
>The problem I see with the menu macro on a cable Box is that some of them hold state so that you don't always have the same button sequence to get to the captions.
this has been a problem to some degree. they're willing to "live with" the fact that a certain menu selection must remain the same.
>Of course there might be a discrete for this too. Does your cable company supply a macro capable remote (is there a 6 pin connector in the battery compartment?)
THERE IS!
hey, maybe i can do this without even using that connector...time for me to find a manual and have a look...
i didn't even consider the shaw remote as a candidate for doing this function...
>What model cable box do you have?
Motorola DCX3400-M
1056B03
thank you! |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Fri May 16, 2014 2:06 pm Post subject: |
|
|
I've never seen a cable box with a discrete command for captions. The best you can do is a macro. Recent Moto firmwares made this a bit easier to do manually, but still nearly impossible to do with a macro. Sorry. |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sun May 18, 2014 2:48 pm Post subject: |
|
|
So your remote probably will do a 15 step macro
The problem is the box uses a state holding menu, so you need a way to get to a known state.
I checked similar boxes to see if anybody found a discrete, and like mdavej said, there doesn't seem to be a discrete for CC.
So the only way for this to work, is for you to be able to put your menu into a known state.
I don't have a Motorola box here to experiment with but you might want to see what your box does when you are in the menu and do "page up" or any other key sequene that might get you to a known state, no matter what the last user did in the menu.
Then you need to see if you can get to closed caption with the remainder of the 15 possible keystrokes.
Kind of hard. I'm glad that I don't have to dink around with the cable box for cc. I'd go nuts. We turn it on and off ALL the time. but through the TV discrete. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
mikepj
Joined: 16 May 2014 Posts: 4
|
Posted: Tue May 20, 2014 9:24 am Post subject: there will be problems |
|
|
haven't been back to try it for them yet. the main problem i anticipate is that there doesn't seem to be a way to delay to wait for the 2 required off/on cycles. |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Tue May 20, 2014 10:15 am Post subject: |
|
|
When working with a cable we usually add a pause protocol. When we didn't have a cable we used to use the zenith trick. There used to be a zenith VCR code that inserted a long bold with record button press. I haven't used that in more than a decade so i'm a little vague on the details. Also since that was a VCR code video/0039 I'm not sure if modern remotes still have the code. The pause isn't nearly as much of an issue as menu state. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
mikepj
Joined: 16 May 2014 Posts: 4
|
Posted: Tue May 20, 2014 10:21 am Post subject: pause |
|
|
thank you; we shall try that; if not, will use the cable. |
|
Back to top |
|
|
|