JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Programming Cable for JP2?

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Non-JP1
View previous topic :: View next topic  
Author Message
mbobak



Joined: 28 Feb 2014
Posts: 4
Location: Belleville, MI

                    
PostPosted: Fri Feb 28, 2014 11:28 pm    Post subject: Programming Cable for JP2? Reply with quote

Hi all,

I have a Comcast Remote, steel grey color, on the label inside the battery compartment, it says: "1167ABC1-0001-R" on the first line and "C131704" on the second line.

Also, on the PCB, right above the 6-pin connector, it's clearly labeled "JP2".

I've seen lots of information on JP1/1.1/1.2/1.3 cables, but from what I have read, none of them will work with a JP2 remote.

So, does a JP2 cable exist? Can I program this remote?

Thanks,

-Mark
Back to top
View user's profile Send private message Visit poster's website
3FG
Expert


Joined: 19 May 2009
Posts: 3365

                    
PostPosted: Fri Feb 28, 2014 11:45 pm    Post subject: Reply with quote

USB cables based on the FTDI chipset do work with JP2 remotes. Generally, ones based on Prolific chipsets don't.

Let's check which kind of remote you have. Use the 983 Command to blink back the signature of the remote. If the signature is 3039, it is JP1.3. If it is 25562, the remote is a JP2. In either case I recommend cables based on FTDI.
Back to top
View user's profile Send private message
mbobak



Joined: 28 Feb 2014
Posts: 4
Location: Belleville, MI

                    
PostPosted: Sat Mar 01, 2014 12:01 pm    Post subject: It's a JP2.. Reply with quote

And the answer is 25562!
Back to top
View user's profile Send private message Visit poster's website
3FG
Expert


Joined: 19 May 2009
Posts: 3365

                    
PostPosted: Sat Mar 01, 2014 2:14 pm    Post subject: Reply with quote

Just at the moment, there are no vendors selling completely ready-made flash cables based on the FTDI chip set. But Tommy Tyler has provided some instructions which can be used with a variety of USB to TTL serial cables. No soldering required, and if you're willing to connect 4 wires each time, this cable will work as shipped.
Back to top
View user's profile Send private message
mbobak



Joined: 28 Feb 2014
Posts: 4
Location: Belleville, MI

                    
PostPosted: Sat Mar 01, 2014 9:37 pm    Post subject: JP1.2/3? Reply with quote

Hi, thanks for that info.

Questions:
I downloaded the Tommy Tyler document, and the title makes reference to "JP1.2/3", not JP2?

So, does that matter? As to the cable source, do I need to use the one you provided, not sourced from Mouser, which is referenced in the Tommy Tyler document? I ask, cause that ebay link seems to source from China, which could take quite some time for delivery. I don't mind paying a few extra bucks if I can source in the US, and get much faster delivery.

Thanks for your help and patience,

-Mark
Back to top
View user's profile Send private message Visit poster's website
3FG
Expert


Joined: 19 May 2009
Posts: 3365

                    
PostPosted: Sat Mar 01, 2014 10:43 pm    Post subject: Reply with quote

Yes, Tommy's instructions work with JP1.4 and JP2 remotes (JP3 also). At the time he wrote the original version, we had no released software support for JP1.4/2/3 remotes.

Getting the part from Mouser (or Digikey) is fine. The part from China is said to include LEDs that light up when TC or RX is signaled, which can be useful at times. But lots of people are using cables without LED indicators.
Back to top
View user's profile Send private message
mbobak



Joined: 28 Feb 2014
Posts: 4
Location: Belleville, MI

                    
PostPosted: Sun Mar 02, 2014 12:50 pm    Post subject: Reply with quote

Excellent, thanks for all the info and help. I'll be ordering today.
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Non-JP1 All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control