need thomson stb tms-888 for slingbox solo

[kawai.jolly]

i only get the hex code, but i can change the format for the remote master, i have try my best to google it, but dont understand how to make it to bin file for my old version slingbox(Sling Media Slingbox SOLO (SB260-100) ), anyone can kindly to help me , many many thks

hong kong user


button power - 00 FE 86 E6
button 1 00 FE 18 E6
button 2 00 FE 00 E6
button 3 00 FE 00 E0
button 4 00 FE 78 E6
button 5 00 FE 60 E6
button 6 00 FE 60 E0
button 7 00 FE F8 98
button 8 00 FE E0 98
button 9 00 FE E0 80
button 0 00 FE FE 80
button up 00 FE 78
button down 00 FE 78 E0
button left 00 FE 98 E6
button right 00 FE 9E E0
button vol up 00 FE 1E E0
button vol down 00 FE 7E E0
button enter 00 FE 98 E0
button record 00 FE 18 E0
button exit 00 FE 66
button epg 00 FE E6 98
button play 00 FE 78 FE
button stop 00 FE 60

[alanrichey]

I'm afraid those numbers mean nothing to me, and although you say you have converted them to an RMDU file, you haven't posted that, so I cannot comment on that.

I couldn't find the TMS-888 but did find a THS-810 and have built a remote for that at https://www.hifi-remote.com/forums/dload ... e_id=12358

Any good ?

BTW, the Slingbox model is irrelevant, all boxes use the same BIN format.

[kawai.jolly]

I'm afraid those numbers mean nothing to me, and although you say you have converted them to an RMDU file, you haven't posted that, so I cannot comment on that.

I couldn't find the TMS-888 but did find a THS-810 and have built a remote for that at https://www.hifi-remote.com/forums/dload ... e_id=12358

Any good ?

BTW, the Slingbox model is irrelevant, all boxes use the same BIN format.

FIRSTLY THKS FOR YOUR KINDLY HELP
BUT IT DOESNT WORK , I PUT IN THE SBAV FOLDER, AND SELECT IT,
THE NEXT STEP, SAY NO UPDATE FIND

IS THAT ANY CODE WRONG FOR MY SLINGBOX.(TOO OLD?)

[alanrichey]

I use IRScope, but I think that needs a specific type of IR Reader, so yours may not be compatible.

[kawai.jolly]

I use IRScope, but I think that needs a specific type of IR Reader, so yours may not be compatible.

FIRSTLY THKS FOR YOUR KINDLY HELP
BUT IT DOESNT WORK , I PUT IN THE SBAV FOLDER, AND SELECT IT,
THE NEXT STEP, SAY NO UPDATE FIND

IS THAT ANY CODE WRONG FOR MY SLINGBOX.(TOO OLD?)

[alanrichey]

Please follow the installation instructions I provided in the file. And do NOT just report back "it doesn't work", follow the instructions,

And the Slingbox type is irrelevant, they ALL use the same format.

[kawai.jolly]

Please follow the installation instructions I provided in the file. And do NOT just report back "it doesn't work", follow the instructions,

And the Slingbox type is irrelevant, they ALL use the same format.

SORRY, I have try the method in the readme.txt instruction, after i folow the instruction, and upload the bin, it doeant work, thks a lot, is that it change the chip, or code

i have try to use the default remote in the slingplayer, the "HKBN" remote can work with a button "mute", is this mean they use the same chip or code, came i get that bin, to change the button setting?

finally, thks a lot for your kindly help

[vickyg2003]

i only get the hex code, but i can change the format for the remote master, i have try my best to google it, but dont understand how to make it to bin file for my old version

If you can not figure out how to create a bin from an RDMU, it is highly unlikely that you can figure out how to use that strange looking hex to create an RDMU.

I can't recognize the hex, but I do know enough to tell it isn't NEC.

With no timing data, no frequency, and nothing to tell if its using all 16 of the bits it is kind of hard to say what it is.

Thomson is all over the place when it comes to protocols.
They use Nec, Nokia, Pace, RC5, Thomson, XMP and who knows what else.

I sure don't see any pattern that I recognize
0000 0000 1111 1110 1 00 00 11 01 11 00 11 0 button power – '00 FE 86 E6
0000 0000 1111 1110 0 00 11 00 01 11 00 11 0 button 1 00 FE 18 E6
0000 0000 1111 1110 0 00 00 00 01 11 00 11 0 button 2 00 FE 00 E6
0000 0000 1111 1110 0 00 00 00 01 11 00 00 0 button 3 00 FE 00 E0
0000 0000 1111 1110 0 11 11 00 01 11 00 11 0 button 4 00 FE 78 E6
0000 0000 1111 1110 0 11 00 00 01 11 00 11 0 button 5 00 FE 60 E6
0000 0000 1111 1110 0 11 00 00 01 11 00 00 0 button 6 00 FE 60 E0
0000 0000 1111 1110 1 11 11 00 01 00 11 00 0 button 7 00 FE F8 98
0000 0000 1111 1110 1 11 00 00 01 00 11 00 0 button 8 00 FE E0 98
0000 0000 1111 1110 1 11 00 00 01 00 11 00 0 button 9 00 FE E0 80
0000 0000 1111 1110 1 11 00 00 01 00 00 00 0 button 0 00 FE FE 80
0000 0000 1111 1110 0 11 11 00 0- -- -- -- - button up 00 FE 78
0000 0000 1111 1110 0 11 11 00 01 11 00 00 0 button down 00 FE 78 E0
0000 0000 1111 1110 1 00 11 00 01 11 00 00 0 button left 00 FE 98 E6
0000 0000 1111 1110 1 00 11 11 01 11 00 00 0 button right 00 FE 9E E0
0000 0000 1111 1110 0 00 11 11 01 11 00 00 0 button vol up 00 FE 1E E0
0000 0000 1111 1110 0 11 11 11 01 11 00 00 0 button vol down 00 FE 7E E0
0000 0000 1111 1110 1 00 11 00 01 11 00 00 0 button enter 00 FE 98 E0
0000 0000 1111 1110 0 00 11 00 01 11 00 00 0 button record 00 FE 18 E0
0000 0000 1111 1110 0 11 00 11 0- -- -- -- - button exit 00 FE 66
0000 0000 1111 1110 1 11 00 11 01 00 11 00 0 button epg 00 FE E6 98
0000 0000 1111 1110 0 11 11 00 01 11 11 11 0 button play 00 FE 78 FE
0000 0000 1111 1110 0 11 00 00 0- -- -- -- 1 button stop 00 FE 60

[alanrichey]

SORRY, I have try the method in the readme.txt instruction, after i folow the instruction, and upload the bin, it doeant work

I am tempted to give up as well. When I specifically asked you to follow the instructions, which say "...If you have problems please do NOT just report back it 'doesn't work', that is totally useless..." and you report back "..it doesn't work.." I wonder why I bother.

[alanrichey]

Are we giving up on this one ?

[alanrichey]

Apparently yes