Converting Hex code

If you have learned signals that don't get decoded when you look at them in IR.exe, post your file to the Diagnosis Area then post your question here (including a link to the file).

Moderator: Moderators

Post Reply
tpaxadpom
Posts: 64
Joined: Wed Sep 19, 2007 12:25 am

Converting Hex code

Post by tpaxadpom »

Hi,

I wasn't able to find KM, RM file for pioneer service remote control. Though I managed to fidn the Hex code that will activate the service menu on my pioneer kuro (that's all I am looking for).
Here it is:
Category Maintenance
Function FACTORY
Command AA5F

HEX CODE (one long line)
0000 0068 0000 0022 0168 00b4 0016 0016 0016 0043 0016 0016 0016 0043 0016 0016 0016 0043 0016 0016 0016 0043 0016 0043 0016 0016 0016 0043 0016 0016 0016 0043 0016 0016 0016 0043 0016 0016 0016 0043 0016 0043 0016 0043 0016 0043 0016 0043 0016 0016 0016 0043 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0043 0016 0016 0016 0043 0016 03dd

I've downloaded IrMaster and c/p this hex code, the I clicked the decode button and here is what I've got:
protocol = Pioneer, device = 170, obc = 95

Are these valid steps or am I missing something? I will try to program this to my JP1 remote.
Top
Post Reply

Return to “JP1 - Protocol Decodes”