Looking for Slingbox Pro-HD bin file for ECHOLITE HDC-2210

Gabor · Post by **Gabor** » Tue Jan 21, 2014 8:41 am

got a pro-hd box, and today my friend gave me an ECHOLITE HDC-2210
and i like to connect it to the box
somebody can help me with a bin file for it?

or it can be work with the old Echolite CDVB-5668 binfile?

thanx a lot

alanrichey · Post by **alanrichey** » Wed Jan 22, 2014 2:22 am

Why haven't you tried it ?

I could not find the HDC-2210, but the Logitech database offered the DSB-790 as a possible. That uses the same codes as the Erastar ER-300. There is a Custom Remote for that box at https://www.hifi-remote.com/forums/dload ... le_id=8110

Any good ?

Gabor · Post by **Gabor** » Wed Jan 22, 2014 3:19 am

Hi Alan!

i tried that old one, and it's not working
wrong codes, for a channel up the box is swiching to radio

thx for that link i'll try that erastar codes now

i'll response when i done

Gabor · Post by **Gabor** » Wed Jan 22, 2014 4:15 am

so, i tried that erastar pl bin file

not working "correctly"

i tried all over the active buttons on the remote
all other buttons which aren't in this list are inactive

the results:

power -> digit 6

pause -> do nothing

guide -> channel down

menu -> digit 1

info -> digit 4

cursor right -> favorite

cursor down -> switching to radio & back to TV

cursor left -> do nothing

cursor up -> last

channel down -> switching to radio & back to TV

channel up -> last

ok -> exit

exit -> digit 7

red -> aspect ratio

green -> digit 3

yellow -> do nothing

blue -> do nothing

digit 1 -> digit 2
digit 2 -> digit 5
digit 3 -> digit 8
digit 4 -> digit 0
digit 5 -> volume mute
digit 6 -> volume up
digit 7 -> volume down
digit 8 -> ? black screen without sound, no other message - pushing again video&sound coming back
digit 9 -> not found any usb device
last -> subtitle setting
digit 0 -> main menu

alanrichey · Post by **alanrichey** » Wed Jan 22, 2014 4:58 am

OK, that's a good start.

Do the same test with the BIN file I just posted at https://www.hifi-remote.com/forums/dload ... e_id=12279

Make sure you test EVERY button, including the 15 Custom Remote buttons you get when you right-click on the image and select Custom.

Once I have those results we should be close.

Gabor · Post by **Gabor** » Wed Jan 22, 2014 7:31 am

the C2011_PL.bin results:

digit 1 -> aspect ratio
digit 2 -> channel list? maybe "ok"
digit 3 -> not found usb device
digit 4 -> maybe "info"
digit 5 -> channel up
digit 6 -> pause
digit 7 -> audio settings
digit 8 -> ? black screen without sound, no other message - pushing again video&sound coming back
digit 9 -> digit 4
digit 0 -> EPG
enter -> digit 9
custom 18 -> subtitle settings

that's all, others are not working, looks like do nothing

alanrichey · Post by **alanrichey** » Wed Jan 22, 2014 8:54 am

That's a bit disappointing, we are missing quite a few I would have expected to find. Maybe we might get better results using the Echolite CDVB-5668 ?

Can you do the same test using that remote ?

Gabor · Post by **Gabor** » Wed Jan 22, 2014 9:40 am

of course...
i just need to reset the settopbox
after the last testing something went wrong
and i've got only black screen with |noise| sound only
and no any menu or other else coming up
so, i must wait for my friend to get home and reset the echolite (and/or the slingbox)

when i done, i'll reply again

Gabor · Post by **Gabor** » Wed Jan 22, 2014 11:32 am

so, it's powered off
one of the buttons just switched off
dont know which one
its up again, so im starting the test

Gabor · Post by **Gabor** » Wed Jan 22, 2014 12:15 pm

power -> digit 7
guide -> nothing
menu -> info
info -> nothing
cursor up -> nothing
cursor right -> digit 1
cursor down -> favorite
cursor left -> pause
ok -> channel list
channel up -> power off?
channel down -> digit 8
page up -> channel down
page down -> digit 6
red,green,blue,yellow -> noting
digit 1 -> digit 3
digit 2 -> schedule
digit 3-> exit
digit 4 -> channel up
digit 5 -> usb device
digit 6 -> nothing
digit 7-> digit 2
digit 8 -> mute
digit 9 -> volume down
digit 0 -> digit 5
last -> switch to radio?
enter -> digit 9
custom 10 -> volume up
custom 11 -> audio settings
custom 12 -> aspect ratio

that's all
with the S2013PL.bin from the Echolite CDVB-5668

alanrichey · Post by **alanrichey** » Wed Jan 22, 2014 1:17 pm

OK. I am slightly concerned that during all these tests you have never found a code for the Up/Down/Left/Right arrows. I hope you are putting the device into an appropriate screen (Menu, Guide..) where these keys would be recognised ?

Next test file at https://www.hifi-remote.com/forums/dload ... e_id=12280

Gabor · Post by **Gabor** » Thu Jan 23, 2014 4:30 am

as i remember i tried the "nothing" buttons over in the "menus" fro up/down/left/right
after this test, i'll try again all other files before for the cursors

now the last results for s2011pl:

power -> last
play -> nothing
rewind-> nothing
stop-> nothing
ffwd-> nothing
skip backw-> nothing
pause-> nothing
skip ffwd-> nothing
rec-> nothing
guide-> nothing
menu-> nothing
info-> nothing
cursor up-> nothing
cursor down-> nothing
cursor right-> nothing
cursor left-> nothing
ok-> nothing
channel up-> nothing
channel down-> nothing
exit-> nothing
page up-> nothing
page down-> nothing
red-> nothing
green-> nothing
yellow-> nothing
blue-> nothing
grey-> nothing
digit 1 -> epg
digit 2 -> aspect
digit 3 -> green or left?
digit 4 -> menu
digit 5 -> digit 0
digit 6 -> digit 4
digit 7 -> nothing
digit 8 -> nothing
digit 9 -> nothing
digit 0 -> noting
last -> nothing
enter -> noting
custom 11 -> noting
custom 12 -> noting
custom 13 -> noting
custom 14 -> noting
custom 15 -> noting
custom 16 -> noting
custom 17 -> subtitle
custom 18 -> nothing
custom 19 -> nothing
custom 20 -> noting
custom 21 -> nothing
custom 27 -> nothing
custom 28 -> noting
custom 29 -> digit 9

thats all,
i tried all over the buttons, can't found the cursor buttons

alanrichey · Post by **alanrichey** » Thu Jan 23, 2014 4:51 am

I'm beginning to get the impression we are getting random results here. So we may be wasting our time.

OR, maybe the arrow buttons are combined with the CH+/- and Vol+/- codes ? What happens in a Menu/Guide if you use the Ch+/- buttons ?

https://www.hifi-remote.com/forums/dload ... e_id=12279 is the next set of codes. There are 255 possible one. The first 2011 took us to Code 80, this one takes us to Cod 120.

Meanwhile, https://www.hifi-remote.com/forums/dload ... e_id=12280 is what we have so far, so might be usable.

Gabor · Post by **Gabor** » Thu Jan 23, 2014 4:54 am

now, i re-tested all 3 earlier bin files , no luck:

erastar S2010_PL.bin - not found cursors

C2011_PL.bin - not found cursors

S2013_PL.bin - not found cursors

Gabor · Post by **Gabor** » Thu Jan 23, 2014 5:11 am

yes!
You right
i tested again the S2013_PL.bin files with the channel menu:

page up - channel down - in the channel list menu -> cursor down
digit 4 - channel up - in the channel listmenu -> cursor up
digit 9 - volume down - in the chanel list menu -> page down
custom 10 -> volume up - in the channel list menu -> page up

now im testing Your last file
the C2010_PL/bin (12280)