View previous topic :: View next topic |
Author |
Message |
Steevo
Joined: 25 Aug 2012 Posts: 52
|
Posted: Thu Dec 26, 2013 4:25 pm Post subject: |
|
|
The Robman wrote: | ok, I've created a RID file for you here:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=11260
I've included a copy of extract_rtv and a bat file in there to make it really easy to install, if you have your R5k drive attached to your PC.
I don't know much about the R4k series and I've never owned one myself. I know they use RID files, so the file should work for you, but I don't know if the extract_rtv procedure is any different. Henry should be able to advise you with that. |
How can I add sonicview to this one? Do we have the codes? I guess you used ridgen, right? (I've been reading)
I can use your batch file and add the sonicview to the Humax and run it on a disk I just prepped for a RTV 5K |
|
Back to top |
|
|
Steevo
Joined: 25 Aug 2012 Posts: 52
|
Posted: Fri Dec 27, 2013 11:27 am Post subject: |
|
|
I found the sonicview rid file
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=7940
I can open it in ridgen. I clicked load, S1000fi.rid, and the ridgen window is populated.
I click save and I have a s1000fi.rid
The batch file now says
Code: |
@ECHO OFF
ECHO "To install new 0237 IR code to Replaytv5000/5500 answer "y" to all prompts then press the Enter key"
pause
ECHO "Installing C0237 code"
extract_rtv -p1 -w user/mirror/sys-setup-gaea/data/irCodeset/C0237fi.rid C0237fi.rid
extract_rtv -p1 -w user/mirror/sys-setup-gaea/data/irCodeset/S1000fi.rid S1000fi.rid
pause
EXIT
|
Will this now add both the 0347 for the Humax and the 1000 for the sonciview properly? |
|
Back to top |
|
|
Steevo
Joined: 25 Aug 2012 Posts: 52
|
Posted: Tue Jan 07, 2014 5:45 pm Post subject: |
|
|
Dead silence on this one.
Heh |
|
Back to top |
|
|
|