JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

windows 7 driver problem for jp1.x usb cable

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Hardware
View previous topic :: View next topic  
Author Message
asinsh



Joined: 05 Aug 2003
Posts: 66

                    
PostPosted: Wed Nov 13, 2013 7:44 am    Post subject: windows 7 driver problem for jp1.x usb cable Reply with quote

I tried my new jp1.x usb cable (from diygadget) and found that my windows 7 pc wouldn't recognize the cable (it shows up in device manager as an unrecognized device). I went to http://www.tiaowiki.com/download//category.php?id=2 for usb driver downloads and tried the delcom jp1 usb drivers and none of them worked. I then tried the jp1.2-1.3 usb driver installer and once that was installed plugging in the cable resulted in a bsod each time. What else should I try?

Thanks.
_________________
Alan
Back to top
View user's profile Send private message
doctorwizz



Joined: 25 May 2005
Posts: 23

                    
PostPosted: Sat Nov 16, 2013 7:25 pm    Post subject: Reply with quote

Did you get it working yet? I can upload a known working driver. Got from here.
Back to top
View user's profile Send private message
asinsh



Joined: 05 Aug 2003
Posts: 66

                    
PostPosted: Mon Nov 25, 2013 11:26 am    Post subject: Reply with quote

Thanks (and sorry I didn't answer earlier). I don't have it working yet but the diygadget support people asked me to return the cable so they can send me another (I guess they think that maybe the cable is defective). Once that arrives, I'll let you know if it works.

Btw, the diygadget support people said I should use the jp1.2-1.3 usb driver installer that appears at http://www.tiaowiki.com/download//category.php?id=2 rather than the delcom drivers...is that what you ended up using?
_________________
Alan
Back to top
View user's profile Send private message
doctorwizz



Joined: 25 May 2005
Posts: 23

                    
PostPosted: Mon Nov 25, 2013 11:37 am    Post subject: Reply with quote

I dont know if is the same.
I used this. Got it from here. I couldn't find it again. But this works for me with a JP1.2/1.3 (FLASH) USB Cable. I have the JP1.2/1.3 to JP1 Adapter. Got those from DIY gadget

http://www.mediafire.com/download/jhf7ntaotjah8w4/VISTA_JP1.2-1.3_USB_CABLE_DRIVER_INSTALLER.zip

It can be updated in windows update in windows 7 and will still work.
It works in windows 8. But the updated one from windows update breaks it.
Back to top
View user's profile Send private message
asinsh



Joined: 05 Aug 2003
Posts: 66

                    
PostPosted: Mon Nov 25, 2013 11:40 am    Post subject: Reply with quote

Thanks! Will let you know how it turns out.
_________________
Alan
Back to top
View user's profile Send private message
asinsh



Joined: 05 Aug 2003
Posts: 66

                    
PostPosted: Fri Dec 06, 2013 7:00 pm    Post subject: Reply with quote

It turned out that the cable was defective. Diygadget sent me a new one (no charge) and it works fine. Thanks again.
_________________
Alan
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Hardware All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control