bin file for skyworth HC7620

make626 · Post by **make626** » Sun May 06, 2012 6:16 am

I need bin file for the remote
skyworth HC7620

http://www.skyworthdigital.com.cn/produ ... 79524.html

It is a digital cable stb.
thx[/url]

alanrichey · Post by **alanrichey** » Sun May 06, 2012 12:51 pm

Closest I could find was the SkyWorth HC800. Any good ?

https://www.hifi-remote.com/forums/dload ... e_id=10933

make626 · Post by **make626** » Sun May 06, 2012 9:25 pm

alanrichey wrote:Closest I could find was the SkyWorth HC800. Any good ?

https://www.hifi-remote.com/forums/dload ... e_id=10933

I will try it later~Thank you~

make626 · Post by **make626** » Mon May 07, 2012 8:05 am

alanrichey wrote:Closest I could find was the SkyWorth HC800. Any good ?

https://www.hifi-remote.com/forums/dload ... e_id=10933

It doesn't work，so sad~
does any one can help me?thx

alanrichey · Post by **alanrichey** » Mon May 07, 2012 8:34 am

Can you please read the instructions properly and give me a better feedback report.

make626 · Post by **make626** » Mon May 07, 2012 9:14 am

alanrichey wrote:Can you please read the instructions properly and give me a better feedback report.

1. Was there any error message after you typed in the Code and tapped the Power button ?
No

2. Did you give the Power command plenty of time to react ? (I have a DVR that takes about 6-8 seconds to power up/down)
Yes

3. After completing the setup (regardless of whether the Power button worked) do any of the other buttons work ?
every buttons don't work

4. Have you used a Digital Camera to confirm the IR Blaster is actually firing when you tap the Power button ?
(Watch the tip of the IR Blaster thorugh the viewfinder while you tap a button. You should see a white (not red) flash)
I can see white flash

5. Have you experimented with the placement of the IR Blaster ? On some devices this is critical so don't give up too quickly.
yes

6. Are you sure the device is working correctly using the real remote ?
yes

thank you~

alanrichey · Post by **alanrichey** » Mon May 07, 2012 9:24 am

Good, thanls for that. Does show the codes are probably incorrect. Have to wait till either that device is installed by a Harmony Remote owner or Sling fix http://remotes.slingbox.com

make626 · Post by **make626** » Mon May 07, 2012 9:30 am

alanrichey wrote:Good, thanls for that. Does show the codes are probably incorrect. Have to wait till either that device is installed by a Harmony Remote owner or Sling fix http://remotes.slingbox.com

ok thank you any way

chuliu · Post by **chuliu** » Sat Oct 05, 2013 12:34 pm

https://www.hifi-remote.com/forums/dload ... e_id=12091

I created the file using logitech remote now that they added it to the database. Please confirm if it works or not. Thanks.

chuliu · Post by **chuliu** » Sat Nov 02, 2013 10:53 am

It's a shame that the file I made was downloaded 6 times. 6 people on the planet needed the file. Yet, no one is willing to provide feedback about if it works or not.

alanrichey · Post by **alanrichey** » Sat Nov 02, 2013 12:02 pm

You get used to it I'm afraid

Post by **vickyg2003** » Sat Nov 02, 2013 2:25 pm

alanrichey wrote:You get used to it I'm afraid

unfortunately too true! Sigh

Cap3301 · Post by **Cap3301** » Sun Nov 10, 2013 9:07 am

Hi Chuliu,

Sorry to inform tell you that your hc7620 binary file did not work for my slingbox.

Thank you....

alanrichey · Post by **alanrichey** » Sun Nov 10, 2013 9:22 am

Jumping in here, I can confirm that the BIN files provided by chuliu are correct for that box, although I would caution that the codes seem to have been uploaded to the Harmony database by only one person, so if they didn't do it correctly.....

I have updated the file at https://www.hifi-remote.com/forums/dload ... e_id=12091 with a set of instructions and trouble-shooting suggestions. Please give it another try and report back.

chuliu · Post by **chuliu** » Sun Nov 17, 2013 9:59 am

Hi Alan.
I didn't know one can check how many people uploaded the codes to harmony database. In fact, I don't even know it was updatable by just any users of the remote. Let alone how to update it.

If I know how to update the database, I have several remotes I wanted to update to it. Please show me.