View previous topic :: View next topic |
Author |
Message |
edvinangelod
Joined: 08 Oct 2013 Posts: 2
|
Posted: Tue Oct 08, 2013 8:15 am Post subject: Ganzklar 32" LED TV Model 6S-32AG |
|
|
Subject: Ganzklar
1. Device: Ganzklar 32" LED TV Model 6S-32AG
2. Type of device: LED TV
3. Year: 2011
4. Remote model: JX-8026F-1-B (encrypted from remote PCB)
5. Do you have a JP1 cable? No
6. Still have original remote? Yes (not working)
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? Yes (to verify code)
10. Learning remote question? n/a
11. Have you tried the JP1 Lookup Tool? Yes, didn't find anything
I Just bought a GE Remote Universal Remote control, assuming that the auto search can replace my damage remote control. only 6 buttons are working, yet in different function ( sample : button 3 for enter)
Last edited by edvinangelod on Tue Oct 08, 2013 9:20 am; edited 2 times in total |
|
Back to top |
|
|
edvinangelod
Joined: 08 Oct 2013 Posts: 2
|
Posted: Tue Oct 08, 2013 8:47 am Post subject: |
|
|
I hope someone could help me |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Tue Oct 08, 2013 9:00 am Post subject: Re: Ganzklar 32" LED TV Model 6S-32AG |
|
|
edvinangelod wrote: |
4. JP1/UEI Remote model: JX-8026F-1-B
I Just both a LG Remote Universal Remote control, assuming that the auto search can replace my damage remote control. only 5 buttons are working. |
As far as I know, this LG Universal Remote is not a JP1 remoteI couldn't find any code sheet to even tell if this uses the standard UEI library. Or if it was a UEI remote that allows keymoves.
With a UEI remote that allows keymoves, and a few working codes, we can usually fill in the blanks, and make a working remote. It depends on the signals used and what is built in to the remote.
Without a UEI remote that sends Keymoves, or a JP1-able UEI remote that we can connect with a cable, there is not much we can do to help.
Sorry. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Tue Oct 08, 2013 9:52 am Post subject: |
|
|
Did the original post on this switch from LG to GE?
Oh and I see the part number now says that its an encrypted number from the PCB board. What is the part number on the GE remote packaging. When I google this part number all I get are .gov sites with encrypted messages from the Lunar space module... Didn't make me feel at all comfortable.
Again, we don't have any information showing us any information showing this to be a JP1 or UEI remote.
This forum specializes in JP1 remotes produced by UEI. If we have evidence that this uses UEI codes and is customizable we MIGHT be able to help, but otherwise you are out of luck.
Post us a link to the GE Universal Remote's PDF with the code list and instructions so we can determine if it might be a UEI. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
|
Back to top |
|
|
|