"AZBox Premium PLUS + HD” Help please!!!!

galosat · Post by **galosat** » Thu Sep 12, 2013 5:23 am

Hello guys!

I have a slingbox 350 and I bought a satellite receiver “AZBox Premium PLUS + HD” and I can’t seem to find a file that works.
I’ve tried about four 6x different files ".bin” that I found on the forums but none of them work.
The sattellite box is in Brazil and I live here in the US so it’s hard for me to actually make a file myself.
Any help would be greatly appreciated!

Thank you!

galosat · Post by **galosat** » Fri Sep 13, 2013 1:08 pm

The first guy who can help me find a good working file that I can use I'll PayPal you $40 bucks
Serious no scam.
Please let me know

Edit!
Just FYI I've tried all the files related to azbox on the download section and none worked.

alanrichey · Post by **alanrichey** » Sat Sep 14, 2013 11:09 am

I've analysed the IR codes for this box and can confirm it is identical to the codes used by the Azbox Premium HD and the Custom Remote for that is at https://www.hifi-remote.com/forums/dload ... le_id=7334

So I guess you have a different problem. What about the suggestions in the Readme file ?

mdavej · Post by **mdavej** » Sat Sep 14, 2013 2:25 pm

I analyzed them too and got the same results. Haven't gotten my $40 yet either

Post by **vickyg2003** » Sat Sep 14, 2013 3:45 pm

I think the poster is probably making a mistake,BUT could someone post an ICT with one signal, just to make sure there isn't a protocol problem.

Galosat, could you see if there is any model number on the back or bottom of the unit.

alanrichey · Post by **alanrichey** » Sun Sep 15, 2013 2:16 am

mdavej wrote:I analyzed them too and got the same results. Haven't gotten my $40 yet either

I meant the suggestions in the instructions, i.e. error messages, external blaster, location.....

alanrichey · Post by **alanrichey** » Sun Sep 15, 2013 2:20 am

vickyg2003 wrote:I think the poster is probably making a mistake,BUT could someone post an ICT with one signal, just to make sure there isn't a protocol problem.

Sorry, not sure what you mean here. What mistake ? And I don't think an ICT file would help, I am sure all the Azbox Premium models use the same code, NEC1 206:95.

Post by **vickyg2003** » Sun Sep 15, 2013 4:58 am

alanrichey wrote:
vickyg2003 wrote:I think the poster is probably making a mistake,BUT could someone post an ICT with one signal, just to make sure there isn't a protocol problem.
Sorry, not sure what you mean here. What mistake ?

Oh, I meant not following the instructions, not checking the IR blasters, not placing them properly, the typical slingbox users problems.

And I don't think an ICT file would help, I am sure all the Azbox Premium models use the same code, NEC1 206:95.

Actually it might. I have encountered a couple of situations where a manufacturer changes the frequency of the NEC signal, between one model and another. Sometimes everything looks good when you look at the decode panel, but the graphical form tells another story. I just wanted to see a single button press in an ICT file, to make sure that the signal doesn't have odd timing values or frequency that might hinder the boxes recognition of the signal. It is definitely a long shot, but it has happened here before.

Hopefully galosat will take a good look at the labels on the box to see if there might be a model number or any other pertinent information that might give a clue as to what other upgrades might work.

alanrichey · Post by **alanrichey** » Sun Sep 15, 2013 5:11 am

vickyg2003 wrote:Oh, I meant not following the instructions, not checking the IR blasters, not placing them properly, the typical slingbox users problems.

Yes, I thought the same

Actually it might. I have encountered a couple of situations where a manufacturer changes the frequency of the NEC signal, between one model and another.

If any manufacturer is going to do that it will be Humax

mdavej · Post by **mdavej** » Sun Sep 15, 2013 7:01 am

alanrichey wrote:
mdavej wrote:I analyzed them too and got the same results. Haven't gotten my $40 yet either
I meant the suggestions in the instructions, i.e. error messages, external blaster, location.....

By same result, I mean a perfect match with the same file as you did. I agree that problem is likely elsewhere, not the file.

galosat · Post by **galosat** » Sun Sep 15, 2013 8:05 am

alanrichey wrote:I've analysed the IR codes for this box and can confirm it is identical to the codes used by the Azbox Premium HD and the Custom Remote for that is at https://www.hifi-remote.com/forums/dload ... le_id=7334

So I guess you have a different problem. What about the suggestions in the Readme file ?

Tried this file and it did not work.
I downloaded it, unzipped it and tried the .PL and the .Bin files.
none worked.

I will keep my word and paypal $40 bucks to the first person who can help me. When I get home I will post a picture of the bottom of the Az box Premium HD Plus

Thank you for your help so far.

alanrichey · Post by **alanrichey** » Sun Sep 15, 2013 8:22 am

galosat wrote:Tried this file and it did not work.

I have asked this before and you still aren't reading the instructions. What am I supposed to do when the instructions specifically state: "..If you have problems do NOT just report that it 'doesn't work', that is totally useless for someone trying to understand what is going on. So report the following:...." and you answer that ?

Do I give up on you as a lost cause ?

galosat · Post by **galosat** » Sun Sep 15, 2013 7:41 pm

Trying to post an image but when I click on IMG nothing happens.
Tried it on the IE and Firefox

how do I post the pic?[/img][/list][/list]

galosat · Post by **galosat** » Tue Sep 17, 2013 7:33 am

vickyg2003 wrote:I think the poster is probably making a mistake,BUT could someone post an ICT with one signal, just to make sure there isn't a protocol problem.

Galosat, could you see if there is any model number on the back or bottom of the unit.

Ok guys sorry I took so long topost pictures:

Here are the only labes on the box"

https://www.dropbox.com/s/xzxdxfrwk4osvt5/picture1.jpg

https://www.dropbox.com/s/att6tj8yigbjv53/picture2.jpg

Please let me know.

Thank you!

alanrichey · Post by **alanrichey** » Tue Sep 17, 2013 8:33 am

As 'galosat' continues to ignore my request to read the instructions I am dropping out of this thread. I give up !!