Zero Repeat Protocol for TDC ?

alanrichey · Post by **alanrichey** » Fri Aug 30, 2013 2:11 pm

Title says it all

Once again we have a user with double-skipping.

Present entry in PROTOCOLS.INI is

Code.S3C80=44 8B 21 8B 14 86 81 10 06 07 00 9D 00 89 00 9D 00 89 AD D4 FF FF FF FF 05 18 03 37 10 0E C6 0E 2D 5D 1C 6A 19 15 19 17 19 19 19 1B 8D 01 49

Could someone tweak it for me ?

Thanks

Al

Post by **vickyg2003** » Sat Aug 31, 2013 7:48 am

Hi Alan, I'm afraid the three day weekend might delay a response. I'm away without my tools. If this isn't handled by Tuesday please bump the thread.

alanrichey · Post by **alanrichey** » Sat Aug 31, 2013 9:30 am

Will do, thanks

3FG · Post by **3FG** » Sat Aug 31, 2013 11:43 am

Code: Select all

[TDC Single Repeat]
PID=01 EE
VariantName=Single
DevParms=Variant:TDC-38|TDC-56,Device:5=10,Sub Device:5=26
DeviceTranslator=Translator(0,1,7) Translator(1,5,1) Translator(2,5,8)
CmdParms=OBC:7=0
CmdTranslator=Translator(0,7)
FixedData=A8 D0
Notes=There are two variants of this protocol, TDC-38 and TDC-56.  The choice is made with the Variant \
parameter on the protocol setup page.
Code.HCS08=20 17 23 46 21 86 90 10 06 07 00 9D 00 9D 00 9D 00 9D AD D4 FF FF FF FF 05 01 60 0F 45 18 2F 35 A7 A6 6A B7 6D B7 6F B7 71 B7 73 CC FF 5C
Code.S3C80=44 8B 21 8B 14 86 90 10 06 07 00 9D 00 89 00 9D 00 89 AD D4 FF FF FF FF 05 18 03 37 10 0E C6 0E 2D 5D 1C 6A 19 15 19 17 19 19 19 1B 8D 01 49

Just on byte is different: 44 8B 21 8B 14 86 90 10 06 07 00 9D 00 89 00 9D 00 89 AD D4 FF FF FF FF 05 18 03 37 10 0E C6 0E 2D 5D 1C 6A 19 15 19 17 19 19 19 1B 8D 01 49

alanrichey · Post by **alanrichey** » Sat Aug 31, 2013 12:01 pm

Many thanks, I've uploaded the file in the Working area.

alanrichey · Post by **alanrichey** » Sun Sep 01, 2013 2:57 am

Just had confirmation that the new protocol cured the double-skipping. Thanks again.